# changelog

author: Denys Vlasenko <dvlasenk@redhat.com> [4.18.0-547.el8]
changelog:
  - x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Give up if memory attribute protocol returns an error (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Increase section and file alignment to 4k/512 (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Split off PE/COFF .data section (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Drop PE/COFF .reloc section (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Construct PE/COFF .text section from assembler (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Derive file size from _edata symbol (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed: Remove, discard, or assert for unwanted sections (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Check that there are no run-time relocations (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Discard .discard.unreachable for arch/x86/boot/compressed/vmlinux (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Define setup size in linker script (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Set EFI handover offset directly in header asm (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Drop references to startup_64 (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Drop redundant code setting the root device (Lenny Szubowicz) [RHEL-2505]
  - x86/build: Declutter the build output (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Omit compression buffer from PE/COFF image memory footprint (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Mark global variables as static (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Remove extra headroom for setup block (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Remove the 'bugger off' message (Lenny Szubowicz) [RHEL-2505]
  - x86/efi: Drop alignment flags from PE section headers (Lenny Szubowicz) [RHEL-2505]
  - efi: Put Linux specific magic number in the DOS header (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Fix the missing KASLR_FLAG bit in boot_params->hdr.loadflags (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Avoid physical KASLR on older Dell systems (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: efistub: Assign global boot_params variable (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Rename conflicting 'boot_params' pointer to 'boot_params_ptr' (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Avoid legacy decompressor when doing EFI boot (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Perform SNP feature test while running in the firmware (Lenny Szubowicz) [RHEL-2505]
  - x86/sev: Do not try to parse for the CC blob on non-AMD hardware (Lenny Szubowicz) [RHEL-2505]
  - efi/libstub: Add limit argument to efi_random_alloc() (Lenny Szubowicz) [RHEL-2505]
  - arm64: efi: Limit allocations to 48-bit addressable physical region (Lenny Szubowicz) [RHEL-2505]
  - efi: libstub: use EFI_LOADER_CODE region when moving the kernel in memory (Lenny Szubowicz) [RHEL-2505]
  - arm64: efi: kaslr: Fix occasional random alloc (and boot) failure (Lenny Szubowicz) [RHEL-2505]
  - efi/libstub/random: Increase random alloc granularity (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Factor out kernel decompression and relocation (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Move global symbol references to C code (Lenny Szubowicz) [RHEL-2505]
  - decompress: Use 8 byte alignment (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Prefer EFI memory attributes protocol over DXE services (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Perform 4/5 level paging switch from the stub (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Merge trampoline cleanup with switching code (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Pass pgtable address to trampoline directly (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Only call the trampoline when changing paging levels (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Call trampoline directly from C code (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Avoid the need for a stack in the 32-bit trampoline (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Use standard calling convention for trampoline (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Call trampoline as a normal function (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed/64: Remove .bss/.pgtable from bzImage (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Remove run-time relocations from .head.text code (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Assign paging related global variables earlier (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Store boot_params pointer in callee save register (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Clear BSS in EFI handover protocol entrypoint (Lenny Szubowicz) [RHEL-2505]
  - x86/head_64: Store boot_params pointer in callee save register (Lenny Szubowicz) [RHEL-2505]
  - x86/decompressor: Don't rely on upper 32 bits of GPRs being preserved (Lenny Szubowicz) [RHEL-2505]
  - x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed (Lenny Szubowicz) [RHEL-2505]
  - efi/libstub: Add memory attribute protocol definitions (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: libstub: remove unused variable (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Robustify calling startup_{32,64}() from the decompressor code (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Simplify and clean up handover entry code (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Branch straight to kernel entry point from C code (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Avoid using code32_start (Lenny Szubowicz) [RHEL-2505]
  - efi/libstub/x86: Use Exit() boot service to exit the stub on errors (Lenny Szubowicz) [RHEL-2505]
  - efi: x86: Wipe setup_data on pure EFI boot (Lenny Szubowicz) [RHEL-2505]
  - efi: x86: Fix config name for setting the NX-compatibility flag in the PE header (Lenny Szubowicz) [RHEL-2505]
  - efi: x86: Set the NX-compatibility flag in the PE header (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Add kernel preferred address to PE header (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Use symbolic constants in PE header instead of bare numbers (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Drop redundant .bss section (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: add headroom to decompressor BSS to account for setup block (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Remove run-time relocations from head_{32,64}.S (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed: Fix debug_puthex() parameter type (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Use unsigned comparison for addresses (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Micro-optimize GDT loading instructions (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: GDT limit value should be size - 1 (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Remove GDT setup from efi_main (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Clear direction and interrupt flags in startup_64 (Lenny Szubowicz) [RHEL-2505]
  - efi/x86: Don't depend on firmware GDT layout (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Remove KEEP_SEGMENTS support (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Handle malformed SRAT tables during early ACPI parsing (Lenny Szubowicz) [RHEL-2505]
  - efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode (Lenny Szubowicz) [RHEL-2505]
  - efi/libstub/x86: Avoid globals to store context during mixed mode calls (Lenny Szubowicz) [RHEL-2505]
  - x86/efistub: Disable paging at mixed mode entry (Lenny Szubowicz) [RHEL-2505]
  - x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table (Lenny Szubowicz) [RHEL-2505]
  - x86/asm: Make some functions local (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Annotate data appropriately (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Annotate local functions (Lenny Szubowicz) [RHEL-2505]
  - x86/asm: Make more symbols local (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed/64: Fix missing initialization in find_trampoline_placement() (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed/64: Fix boot on machines with broken E820 table (Lenny Szubowicz) [RHEL-2505]
  - x86, boot: Remove multiple copy of static function sanitize_boot_params() (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed/64: Remove unused variable (Lenny Szubowicz) [RHEL-2505]
  - x86/boot/compressed/64: Explain paging_prepare()'s return value (Lenny Szubowicz) [RHEL-2505]
  - x86/boot: Save several bytes in decompressor (Lenny Szubowicz) [RHEL-2505]
  - fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super (Audra Mitchell) [RHEL-20614] {CVE-2024-0841}
  - net/gve: update check for little-endianness in gve kconfig (Joshua Washington) [RHEL-29030]


author: Denys Vlasenko <dvlasenk@redhat.com> [4.18.0-548.el8]
changelog:
  - gitlab-ci: enable arm64/s390x/ppc64le debug builds (Michael Hofmann)
  - arm64: Add missing bits of AmpereOne Spectre-BHB mitigation (Mark Salter) [RHEL-29005]
  - [rt] enable CONFIG_DRM_MGAG200_IOBURST_WORKAROUND (Jocelyn Falempe) [RHEL-13214]
  - drm/mgag200: Add a workaround for low-latency (Jocelyn Falempe) [RHEL-13214]


author: Pavel Raiskup <praiskup@redhat.com> - 3.3.2-4
changelog:
  - fix out-of-bounds read within lha_read_data_none() (CVE-2017-14503)
  - fix crash on crafted 7zip archives (CVE-2019-1000019)
  - fix infinite loop in ISO9660 (CVE-2019-1000020)


author: Ondrej Dubaj <odubaj@redhat.com> - 3.3.2-7
changelog:
  - fix use-after-free in delayed newc link processing (#1602575)
  - fix a few obvious resource leaks and strcpy() misuses (#1602575)


author: Colin Walters <walters@verbum.org> - 0.1.7-1
changelog:
  - New upstream version;
    https://github.com/projectatomic/bubblewrap/releases/tag/v0.1.7
  - Resolves: #1411814


author: Jakub Martisko <jamartis@redhat.com> - 1.0.6-28
changelog:
  - The previous fix caused some regressions
  - Use an updated patch that deals with the original issue+the regressions
  Resolves: RHEL-71140


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-6
changelog:
  - Resolves: rhbz#1989425 - CVE-2021-3672 c-ares: missing input validation of host names may lead to Domain Hijacking [rhel-8]


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-7
changelog:
  - Resolves: rhbz#2170867 - c-ares: buffer overflow in config_sortlist() due to missing string length check [rhel-8]


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-6.1
changelog:
  - Resolves: rhbz#2209516 - CVE-2023-32067 c-ares: 0-byte UDP payload Denial of Service [rhel-8.8.0.z]


author: Kai Engert <kaie@redhat.com> - 2017.2.20-6
changelog:
  - Depend on bash, grep, sed. Required for ca-legacy script execution.
  - p11-kit is already required at %post execution time. (rhbz#1537127)


author: Bob Relyea <rrelyea@redhat.com> - 2019.2.32-1
changelog:
  - Update to CKBI 2.32 from NSS 3.44
  -  Removing:
  -   # Certificate "Visa eCommerce Root"
  -   # Certificate "AC Raiz Certicamara S.A."
  -   # Certificate "ComSign CA"
  -   # Certificate "Certplus Root CA G1"
  -   # Certificate "Certplus Root CA G2"
  -   # Certificate "OpenTrust Root CA G1"
  -   # Certificate "OpenTrust Root CA G2"
  -   # Certificate "OpenTrust Root CA G3"
  -  Adding:
  -   # Certificate "GlobalSign Root CA - R6"
  -   # Certificate "OISTE WISeKey Global Root GC CA"
  -   # Certificate "GTS Root R1"
  -   # Certificate "GTS Root R2"
  -   # Certificate "GTS Root R3"
  -   # Certificate "GTS Root R4"
  -   # Certificate "UCA Global G2 Root"
  -   # Certificate "UCA Extended Validation Root"
  -   # Certificate "Certigna Root CA"
  -   # Certificate "emSign Root CA - G1"
  -   # Certificate "emSign ECC Root CA - G3"
  -   # Certificate "emSign Root CA - C1"
  -   # Certificate "emSign ECC Root CA - C3"
  -   # Certificate "Hongkong Post Root CA 3"


author: Bob Relyea <rrelyea@redhat.com> - 2020.2.41-80.0
changelog:
  - Update to CKBI 2.41 from NSS 3.53.0
  -    Removing:
  -     # Certificate "AddTrust Low-Value Services Root"
  -     # Certificate "AddTrust External Root"
  -     # Certificate "UTN USERFirst Email Root CA"
  -     # Certificate "Certplus Class 2 Primary CA"
  -     # Certificate "Deutsche Telekom Root CA 2"
  -     # Certificate "Staat der Nederlanden Root CA - G2"
  -     # Certificate "Swisscom Root CA 2"
  -     # Certificate "Certinomis - Root CA"
  -    Adding:
  -     # Certificate "Entrust Root Certification Authority - G4"


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-80.0
changelog:
  - Update to CKBI 2.48 from NSS 3.66
  -    Removing:
  -     # Certificate "Verisign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "QuoVadis Root CA"
  -     # Certificate "Sonera Class 2 Root CA"
  -     # Certificate "Taiwan GRCA"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "Trustis FPS Root CA"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G4"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G4"
  -    Adding:
  -     # Certificate "Microsoft ECC Root Certificate Authority 2017"
  -     # Certificate "Microsoft RSA Root Certificate Authority 2017"
  -     # Certificate "e-Szigno Root CA 2017"
  -     # Certificate "certSIGN Root CA G2"
  -     # Certificate "Trustwave Global Certification Authority"
  -     # Certificate "Trustwave Global ECC P256 Certification Authority"
  -     # Certificate "Trustwave Global ECC P384 Certification Authority"
  -     # Certificate "NAVER Global Root Certification Authority"
  -     # Certificate "AC RAIZ FNMT-RCM SERVIDORES SEGUROS"
  -     # Certificate "GlobalSign Secure Mail Root R45"
  -     # Certificate "GlobalSign Secure Mail Root E45"
  -     # Certificate "GlobalSign Root R46"
  -     # Certificate "GlobalSign Root E46"
  -     # Certificate "GLOBALTRUST 2020"
  -     # Certificate "ANF Secure Server Root CA"
  -     # Certificate "Certum EC-384 CA"
  -     # Certificate "Certum Trusted Root CA"


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-81
changelog:
  - Update to CKBI 2.48 from NSS 3.64
  -    Removing:
  -     # Certificate "Verisign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "Taiwan GRCA"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G4"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G4"
  -    Adding:
  -     # Certificate "Microsoft ECC Root Certificate Authority 2017"
  -     # Certificate "Microsoft RSA Root Certificate Authority 2017"
  -     # Certificate "e-Szigno Root CA 2017"
  -     # Certificate "certSIGN Root CA G2"
  -     # Certificate "Trustwave Global Certification Authority"
  -     # Certificate "Trustwave Global ECC P256 Certification Authority"
  -     # Certificate "Trustwave Global ECC P384 Certification Authority"
  -     # Certificate "NAVER Global Root Certification Authority"
  -     # Certificate "AC RAIZ FNMT-RCM SERVIDORES SEGUROS"
  -     # Certificate "GlobalSign Secure Mail Root R45"
  -     # Certificate "GlobalSign Secure Mail Root E45"
  -     # Certificate "GlobalSign Root R46"
  -     # Certificate "GlobalSign Root E46"


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-82
changelog:
  - Update to CKBI 2.48 from NSS 3.66
  -    Removing:
  -     # Certificate "QuoVadis Root CA"
  -     # Certificate "Sonera Class 2 Root CA"
  -     # Certificate "Trustis FPS Root CA"
  -    Adding:
  -     # Certificate "GLOBALTRUST 2020"
  -     # Certificate "ANF Secure Server Root CA"
  -     # Certificate "Certum EC-384 CA"
  -     # Certificate "Certum Trusted Root CA"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-81
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Removing:
  -     # Certificate "GlobalSign Root CA - R2"
  -     # Certificate "DST Root CA X3"
  -     # Certificate "Cybertrust Global Root"
  -     # Certificate "Explicitly Distrusted DigiNotar PKIoverheid G2"
  -    Adding:
  -     # Certificate "TunTrust Root CA"
  -     # Certificate "HARICA TLS RSA Root CA 2021"
  -     # Certificate "HARICA TLS ECC Root CA 2021"
  -     # Certificate "HARICA Client RSA Root CA 2021"
  -     # Certificate "HARICA Client ECC Root CA 2021"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "vTrus ECC Root CA"
  -     # Certificate "vTrus Root CA"
  -     # Certificate "ISRG Root X2"
  -     # Certificate "HiPKI Root CA - G1"
  -     # Certificate "Telia Root CA v2"
  -     # Certificate "D-TRUST BR Root CA 1 2020"
  -     # Certificate "D-TRUST EV Root CA 1 2020"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-80.0
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Adding:
  -     # Certificate "CAEDICOM Root"
  -     # Certificate "I.CA Root CA/RSA"
  -     # Certificate "MULTICERT Root Certification Authority 01"
  -     # Certificate "Certification Authority of WoSign G2"
  -     # Certificate "CA WoSign ECC Root"
  -     # Certificate "CCA India 2015 SPL"
  -     # Certificate "Swedish Government Root Authority v3"
  -     # Certificate "Swedish Government Root Authority v2"
  -     # Certificate "Tunisian Root Certificate Authority - TunRootCA2"
  -     # Certificate "OpenTrust Root CA G1"
  -     # Certificate "OpenTrust Root CA G2"
  -     # Certificate "OpenTrust Root CA G3"
  -     # Certificate "Certplus Root CA G1"
  -     # Certificate "Certplus Root CA G2"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Thailand National Root Certification Authority - G1"
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "Certification Authority of WoSign"
  -     # Certificate "CA 沃通根证书"
  -     # Certificate "SSC GDL CA Root B"
  -     # Certificate "SAPO Class 2 Root CA"
  -     # Certificate "SAPO Class 3 Root CA"
  -     # Certificate "SAPO Class 4 Root CA"
  -     # Certificate "CA Disig Root R1"
  -     # Certificate "Autoridad Certificadora Raíz Nacional de Uruguay"
  -     # Certificate "ApplicationCA2 Root"
  -     # Certificate "GlobalSign"
  -     # Certificate "Symantec Class 3 Public Primary Certification Authority - G6"
  -     # Certificate "Symantec Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "Halcom Root CA"
  -     # Certificate "Swisscom Root EV CA 2"
  -     # Certificate "CFCA GT CA"
  -     # Certificate "Digidentity L3 Root CA - G2"
  -     # Certificate "SITHS Root CA v1"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority (G02)"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira v2"
  -     # Certificate "Swisscom Root CA 2"
  -     # Certificate "IGC/A AC racine Etat francais"
  -     # Certificate "PersonalID Trustworthy RootCA 2011"
  -     # Certificate "Swedish Government Root Authority v1"
  -     # Certificate "Swiss Government Root CA II"
  -     # Certificate "Swiss Government Root CA I"
  -     # Certificate "Network Solutions Certificate Authority"
  -     # Certificate "COMODO Certification Authority"
  -     # Certificate "LuxTrust Global Root"
  -     # Certificate "AC1 RAIZ MTIN"
  -     # Certificate "Microsoft Root Certificate Authority 2011"
  -     # Certificate "CCA India 2011"
  -     # Certificate "ANCERT Certificados Notariales V2"
  -     # Certificate "ANCERT Certificados CGN V2"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "DigiNotar Root CA G2"
  -     # Certificate "Federal Common Policy CA"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "China Internet Network Information Center EV Certificates Root"
  -     # Certificate "Verizon Global Root CA"
  -     # Certificate "SwissSign Silver Root CA - G3"
  -     # Certificate "SwissSign Platinum Root CA - G3"
  -     # Certificate "SwissSign Gold Root CA - G3"
  -     # Certificate "Microsec e-Szigno Root CA 2009"
  -     # Certificate "SITHS CA v3"
  -     # Certificate "Certinomis - Autorité Racine"
  -     # Certificate "ANF Server CA"
  -     # Certificate "Thawte Premium Server CA"
  -     # Certificate "Thawte Server CA"
  -     # Certificate "TC TrustCenter Universal CA III"
  -     # Certificate "KEYNECTIS ROOT CA"
  -     # Certificate "I.CA - Standard Certification Authority, 09/2009"
  -     # Certificate "I.CA - Qualified Certification Authority, 09/2009"
  -     # Certificate "VI Registru Centras RCSC (RootCA)"
  -     # Certificate "CCA India 2007"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira v1"
  -     # Certificate "ipsCA Global CA Root"
  -     # Certificate "ipsCA Main CA Root"
  -     # Certificate "Actalis Authentication CA G1"
  -     # Certificate "A-Trust-Qual-03"
  -     # Certificate "AddTrust External CA Root"
  -     # Certificate "ECRaizEstado"
  -     # Certificate "Configuration"
  -     # Certificate "FNMT-RCM"
  -     # Certificate "StartCom Certification Authority"
  -     # Certificate "TWCA Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "E-ME SSI (RCA)"
  -     # Certificate "ACEDICOM Root"
  -     # Certificate "Autoridad Certificadora Raiz de la Secretaria de Economia"
  -     # Certificate "Correo Uruguayo - Root CA"
  -     # Certificate "CNNIC ROOT"
  -     # Certificate "Common Policy"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority"
  -     # Certificate "Staat der Nederlanden Root CA - G2"
  -     # Certificate "NetLock Platina (Class Platinum) Főtanúsítvány"
  -     # Certificate "AC Raíz Certicámara S.A."
  -     # Certificate "Cisco Root CA 2048"
  -     # Certificate "CA Disig"
  -     # Certificate "InfoNotary CSP Root"
  -     # Certificate "UCA Global Root"
  -     # Certificate "UCA Root"
  -     # Certificate "DigiNotar Root CA"
  -     # Certificate "Starfield Services Root Certificate Authority"
  -     # Certificate "I.CA - Qualified root certificate"
  -     # Certificate "I.CA - Standard root certificate"
  -     # Certificate "e-Guven Kok Elektronik Sertifika Hizmet Saglayicisi"
  -     # Certificate "Japanese Government"
  -     # Certificate "AdminCA-CD-T01"
  -     # Certificate "Admin-Root-CA"
  -     # Certificate "Izenpe.com"
  -     # Certificate "TÜBİTAK UEKAE Kök Sertifika Hizmet Sağlayıcısı - Sürüm 3"
  -     # Certificate "Halcom CA FO"
  -     # Certificate "Halcom CA PO 2"
  -     # Certificate "Root CA"
  -     # Certificate "GPKIRootCA"
  -     # Certificate "ACNLB"
  -     # Certificate "state-institutions"
  -     # Certificate "state-institutions"
  -     # Certificate "SECOM Trust Systems CO.,LTD."
  -     # Certificate "D-TRUST Qualified Root CA 1 2007:PN"
  -     # Certificate "D-TRUST Root Class 2 CA 2007"
  -     # Certificate "D-TRUST Root Class 3 CA 2007"
  -     # Certificate "SSC Root CA A"
  -     # Certificate "SSC Root CA B"
  -     # Certificate "SSC Root CA C"
  -     # Certificate "Autoridad de Certificacion de la Abogacia"
  -     # Certificate "Root CA Generalitat Valenciana"
  -     # Certificate "VAS Latvijas Pasts SSI(RCA)"
  -     # Certificate "ANCERT Certificados CGN"
  -     # Certificate "ANCERT Certificados Notariales"
  -     # Certificate "ANCERT Corporaciones de Derecho Publico"
  -     # Certificate "GLOBALTRUST"
  -     # Certificate "Certipost E-Trust TOP Root CA"
  -     # Certificate "Certipost E-Trust Primary Qualified CA"
  -     # Certificate "Certipost E-Trust Primary Normalised CA"
  -     # Certificate "Cybertrust Global Root"
  -     # Certificate "GlobalSign"
  -     # Certificate "IGC/A"
  -     # Certificate "S-TRUST Authentication and Encryption Root CA 2005:PN"
  -     # Certificate "TC TrustCenter Universal CA I"
  -     # Certificate "TC TrustCenter Universal CA II"
  -     # Certificate "TC TrustCenter Class 2 CA II"
  -     # Certificate "TC TrustCenter Class 4 CA II"
  -     # Certificate "Swisscom Root CA 1"
  -     # Certificate "Microsec e-Szigno Root CA"
  -     # Certificate "LGPKI"
  -     # Certificate "AC RAIZ DNIE"
  -     # Certificate "Common Policy"
  -     # Certificate "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "CertRSA01"
  -     # Certificate "KISA RootCA 1"
  -     # Certificate "KISA RootCA 3"
  -     # Certificate "NetLock Minositett Kozjegyzoi (Class QA) Tanusitvanykiado"
  -     # Certificate "A-CERT ADVANCED"
  -     # Certificate "A-Trust-Qual-01"
  -     # Certificate "A-Trust-nQual-01"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Staat der Nederlanden Root CA"
  -     # Certificate "Serasa Certificate Authority II"
  -     # Certificate "TDC Internet"
  -     # Certificate "America Online Root Certification Authority 2"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "RSA Security Inc"
  -     # Certificate "Public Notary Root"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Global CA 2"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "QuoVadis Root Certification Authority"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira"
  -     # Certificate "Post.Trust Root CA"
  -     # Certificate "Microsoft Root Authority"
  -     # Certificate "Microsoft Root Certificate Authority"
  -     # Certificate "Microsoft Root Certificate Authority 2010"
  -     # Certificate "Entrust.net Secure Server Certification Authority"
  -     # Certificate "UTN-USERFirst-Object"
  -     # Certificate "BYTE Root Certification Authority 001"
  -     # Certificate "CISRCA1"
  -     # Certificate "ePKI Root Certification Authority - G2"
  -     # Certificate "ePKI EV SSL Certification Authority - G1"
  -     # Certificate "AC Raíz Certicámara S.A."
  -     # Certificate "SSL.com EV Root Certification Authority RSA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "ACA ROOT"
  -     # Certificate "Security Communication ECC RootCA1"
  -     # Certificate "Security Communication RootCA3"
  -     # Certificate "CHAMBERS OF COMMERCE ROOT - 2016"
  -     # Certificate "Network Solutions RSA Certificate Authority"
  -     # Certificate "Network Solutions ECC Certificate Authority"
  -     # Certificate "Australian Defence Public Root CA"
  -     # Certificate "SI-TRUST Root"
  -     # Certificate "Halcom Root Certificate Authority"
  -     # Certificate "Application CA G3 Root"
  -     # Certificate "GLOBALTRUST 2015"
  -     # Certificate "Microsoft ECC Product Root Certificate Authority 2018"
  -     # Certificate "emSign Root CA - G2"
  -     # Certificate "emSign Root CA - C2"
  -     # Certificate "Microsoft ECC TS Root Certificate Authority 2018"
  -     # Certificate "DigiCert CS ECC P384 Root G5"
  -     # Certificate "DigiCert CS RSA4096 Root G5"
  -     # Certificate "DigiCert RSA4096 Root G5"
  -     # Certificate "DigiCert ECC P384 Root G5"
  -     # Certificate "HARICA Code Signing RSA Root CA 2021"
  -     # Certificate "HARICA Code Signing ECC Root CA 2021"
  -     # Certificate "Microsoft Identity Verification Root Certificate Authority 2020"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-80.2
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Removing:
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "Network Solutions Certificate Authority"
  -     # Certificate "COMODO Certification Authority"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "Microsec e-Szigno Root CA 2009"
  -     # Certificate "TWCA Root Certification Authority"
  -     # Certificate "Izenpe.com"
  -     # Certificate "state-institutions"
  -     # Certificate "GlobalSign"
  -     # Certificate "Common Policy"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "AC Raíz Certicámara S.A."


author: Robert Relyea <rrelyea@redhat.com> - 2023.2.60_v7.0.306-80.0
changelog:
  - Update to CKBI 2.60_v7.0.306 from NSS 3.91
  -    Removing:
  -     # Certificate "Camerfirma Global Chambersign Root"
  -     # Certificate "Staat der Nederlanden EV Root CA"
  -     # Certificate "OpenTrust Root CA G1"
  -     # Certificate "Swedish Government Root Authority v1"
  -     # Certificate "DigiNotar Root CA G2"
  -     # Certificate "Federal Common Policy CA"
  -     # Certificate "TC TrustCenter Universal CA III"
  -     # Certificate "CCA India 2007"
  -     # Certificate "ipsCA Global CA Root"
  -     # Certificate "ipsCA Main CA Root"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority"
  -     # Certificate "InfoNotary CSP Root"
  -     # Certificate "DigiNotar Root CA"
  -     # Certificate "Root CA"
  -     # Certificate "GPKIRootCA"
  -     # Certificate "D-TRUST Qualified Root CA 1 2007:PN"
  -     # Certificate "TC TrustCenter Universal CA I"
  -     # Certificate "TC TrustCenter Universal CA II"
  -     # Certificate "TC TrustCenter Class 2 CA II"
  -     # Certificate "TC TrustCenter Class 4 CA II"
  -     # Certificate "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "CertRSA01"
  -     # Certificate "KISA RootCA 3"
  -     # Certificate "A-CERT ADVANCED"
  -     # Certificate "A-Trust-Qual-01"
  -     # Certificate "A-Trust-nQual-01"
  -     # Certificate "Serasa Certificate Authority II"
  -     # Certificate "TDC Internet"
  -     # Certificate "America Online Root Certification Authority 2"
  -     # Certificate "RSA Security Inc"
  -     # Certificate "Public Notary Root"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira"
  -     # Certificate "Post.Trust Root CA"
  -     # Certificate "Entrust.net Secure Server Certification Authority"
  -     # Certificate "ePKI EV SSL Certification Authority - G1"
  -    Adding:
  -     # Certificate "DigiCert TLS ECC P384 Root G5"
  -     # Certificate "DigiCert TLS RSA4096 Root G5"
  -     # Certificate "DigiCert SMIME ECC P384 Root G5"
  -     # Certificate "DigiCert SMIME RSA4096 Root G5"
  -     # Certificate "Certainly Root R1"
  -     # Certificate "Certainly Root E1"
  -     # Certificate "E-Tugra Global Root CA RSA v3"
  -     # Certificate "E-Tugra Global Root CA ECC v3"
  -     # Certificate "DIGITALSIGN GLOBAL ROOT RSA CA"
  -     # Certificate "DIGITALSIGN GLOBAL ROOT ECDSA CA"
  -     # Certificate "BJCA Global Root CA1"
  -     # Certificate "BJCA Global Root CA2"
  -     # Certificate "Symantec Enterprise Mobile Root for Microsoft"
  -     # Certificate "A-Trust-Root-05"
  -     # Certificate "ADOCA02"
  -     # Certificate "StartCom Certification Authority G2"
  -     # Certificate "ATHEX Root CA"
  -     # Certificate "EBG Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "America Online Root Certification Authority 1"
  -     # Certificate "Juur-SK"
  -     # Certificate "ComSign CA"
  -     # Certificate "ComSign Secured CA"
  -     # Certificate "ComSign Advanced Security CA"
  -     # Certificate "Global Chambersign Root"
  -     # Certificate "Sonera Class2 CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "VeriSign, Inc."
  -     # Certificate "GTE CyberTrust Global Root"
  -     # Certificate "Equifax Secure Global eBusiness CA-1"
  -     # Certificate "Equifax"
  -     # Certificate "Class 1 Primary CA"
  -     # Certificate "Swiss Government Root CA III"
  -     # Certificate "Application CA G4 Root"
  -     # Certificate "SSC GDL CA Root A"
  -     # Certificate "GlobalSign Code Signing Root E45"
  -     # Certificate "GlobalSign Code Signing Root R45"
  -     # Certificate "Entrust Code Signing Root Certification Authority - CSBR1"


author: Frantisek Krenzelok <fkrenzel@redhat.com> - 2024.2.69_v8.0.303-80.0
changelog:
  - Update to CKBI 2.69_v8.0.303 from NSS 3.101.1
  -    Removing:
  -     # Certificate "Verisign Class 1 Public Primary Certification Authority - G3"
  -     # Certificate "Verisign Class 2 Public Primary Certification Authority - G3"
  -     # Certificate "Security Communication Root CA"
  -     # Certificate "Camerfirma Chambers of Commerce Root"
  -     # Certificate "Hongkong Post Root CA 1"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G6"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G6"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "FNMT-RCM"
  -    Adding:
  -     # Certificate "LAWtrust Root CA2 (4096)"
  -     # Certificate "Sectigo Public Email Protection Root E46"
  -     # Certificate "Sectigo Public Email Protection Root R46"
  -     # Certificate "Sectigo Public Server Authentication Root E46"
  -     # Certificate "Sectigo Public Server Authentication Root R46"
  -     # Certificate "SSL.com TLS RSA Root CA 2022"
  -     # Certificate "SSL.com TLS ECC Root CA 2022"
  -     # Certificate "SSL.com Client ECC Root CA 2022"
  -     # Certificate "SSL.com Client RSA Root CA 2022"
  -     # Certificate "Atos TrustedRoot Root CA ECC G2 2020"
  -     # Certificate "Atos TrustedRoot Root CA RSA G2 2020"
  -     # Certificate "Atos TrustedRoot Root CA ECC TLS 2021"
  -     # Certificate "Atos TrustedRoot Root CA RSA TLS 2021"
  -     # Certificate "TrustAsia Global Root CA G3"
  -     # Certificate "TrustAsia Global Root CA G4"
  -     # Certificate "CommScope Public Trust ECC Root-01"
  -     # Certificate "CommScope Public Trust ECC Root-02"
  -     # Certificate "CommScope Public Trust RSA Root-01"
  -     # Certificate "CommScope Public Trust RSA Root-02"
  -     # Certificate "D-Trust SBR Root CA 1 2022"
  -     # Certificate "D-Trust SBR Root CA 2 2022"
  -     # Certificate "Telekom Security SMIME ECC Root 2021"
  -     # Certificate "Telekom Security TLS ECC Root 2020"
  -     # Certificate "Telekom Security SMIME RSA Root 2023"
  -     # Certificate "Telekom Security TLS RSA Root 2023"
  -     # Certificate "FIRMAPROFESIONAL CA ROOT-A WEB"
  -     # Certificate "SECOM Trust.net"
  -     # Certificate "Chambers of Commerce Root"
  -     # Certificate "VeriSign Class 2 Public Primary Certification Authority - G3"
  -     # Certificate "SSL.com Code Signing RSA Root CA 2022"
  -     # Certificate "SSL.com Code Signing ECC Root CA 2022"


author: David Howells <dhowells@redhat.com> 0.10.6-1
changelog:
  - Note the correct licence.
  - Handle malformed kernel status correctly.
  - Permit culling to be disabled on the command line with the -N flag.
  - Suspend culling when cache space is short and cache objects are pinned.


author: David Howells <dhowells@redhat.com> 0.10.8-1
changelog:
  - Use systemd interaction macros in specfile installation sections [RH BZ 850053].
  - Fix the service file to use /usr/sbin/ rather than /sbin/.
  - Turn on RELRO and PIE build hardening in RPM builds.


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.3.62-1
changelog:
  - use systemctl preset, not systemctl enable
  - fix typo in manpage
  - partly support socket activated services


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.4-1
changelog:
  - ntsysv: show systemd services and sockets
  - fix combination --type xinetd --list service
  - leveldb: restore selinux context for xinetd conf files
  - alternatives: remove unused variable
  - alternatives: warn if the target is not a symlink
  - spec: add link to git
  - lets simplify version


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.5-1
changelog:
  - add systemd-sysv-install alias
  - don't create symlinks if they already exist
  - fix wrongly behaving LDFLAGS


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.6-1
changelog:
  - systemd-sysv-install: don't play ping-pong with systemctl
  - ntsysv: add description to systemd services
  - ntsysv: skip templates
  - Makefile: fix typo


author: Lukáš Nykrýn <lnykryn@redhat.com> - 1.8-1
changelog:
  - alternatives: introduce --keep-missing
  - alternatives: allow family in --set and display it in --config
  - chkconfig: use isXinetdEnabled instead of isOn
  - leveldb: trim leading whitespaces from systemctl
  - leveldb: suppress error messages when selinux is turned off
  - alternatives: always recreate symlinks when the alternative is updated
  - test-alternatives: basic tests for slave links
  - chkconfig: resetpriorities should work on all runlevels


author: Lukas Nykryn <lnykryn@redhat.com> - 1.11-1
changelog:
  - Add tests for --add/remove-slave and use beakerlib
  - alternatives: add-slave and remove-slave
  - leveldb: don't crash on long names
  - alternatives: prettier --list output


author: Jan Macku <jamacku@redhat.com> - 1.15-1
changelog:
  - spec: sync specfile with Fedora
  - makefile: Use rpmdev-bumpspec's legacy date option
  - Add feature to generate specfile entry, commit and archive


author: Jan Macku <jamacku@redhat.com> - 1.16-1
changelog:
  - alternatives: add --keep-foreign (#57)
  - Translations update from Weblate
  - ci: Onboard chkconfig to Packit
  - zanata: remove zanata related stuff
  - Use make macros
  - alternatives: use one function for path cleaning
  - CI: specify more closely when to run CI
  - Add basic CI and README
  - spec: sync specfile with Fedora


author: Jan Macku <jamacku@redhat.com> - 1.19.2-1
changelog:
  - alternatives: --keep-foreign incorrectly handles non-existent files
  - alternatives: isLink should return 0 in case of lstat error
  - spec: Replace not working awk command with sed (#63)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.2-2
changelog:
  - fix chronyc getting stuck in infinite loop after clock step
  - don't allow packaging without vendor zone
  - suggest ntp-refclock
  - remove obsolete dependency
  - update description


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-2
changelog:
  - move pidfile to /var/run/chrony to allow chronyd to remove it on exit
    (#1584585)
  - avoid blocking in getrandom system call (#1592425)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-3
changelog:
  - fix PIDFile in local chronyd.service on upgrades from chrony < 3.3-2
    (#1614800)
  - add workaround for late reload of unit file (#1614751)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.5-1
changelog:
  - update to 3.5 (#1685469 #1677218)
  - fix shellcheck warnings in helper scripts (#1711948)
  - update ntp2chrony script


author: Miroslav Lichvar <mlichvar@redhat.com> 4.1-1
changelog:
  - update to 4.1 (#1895003 #1847853 #1929157)
  - add NetworkManager dispatcher script to add servers from DHCP even without
    dhclient (#1933139)
  - restrict permissions of /var/lib/chrony and /var/log/chrony (#1939295)
  - reset chrony-helper state after stopping chronyd (#1971697)
  - add gcc-c++ and make to build requirements
  - move default paths in /var/run to /run


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2-1
changelog:
  - update to 4.2 (#2062356)
  - fix chrony-helper to delete sources by their original name (#2061660)
  - update ntp2chrony script (#2018045 #2063766)


author: Koichiro Iwao <koichiro.iwao@miraclelinux.com> 4.2-1
changelog:
  - Change chrony.conf to use ntp.miraclelinux.net server
  - Use "pool" rather than "server" as ntp.miraclelinux.net is a pool of
    multiple NTP servers


author: Miroslav Lichvar <mlichvar@redhat.com> 4.5-2.el8_10
changelog:
  - fix crash on reload command during start (RHEL-59112)
  - enable AES-CMAC support using gnutls (RHEL-59032)


author: David King <amigadave@amigadave.com> - 0.16-1
changelog:
  - Update to 0.16 (#1144863)
  - Remove clean section and BuildRoot tag
  - Update URL and Sourc0
  - Use license macro for COPYING
  - Use parallel make flags
  - Preserve timestamps during install


author: Jeff Layton <jlayton@redhat.com> - 6.7-5
changelog:
  - more updates, switch to rst for manpages
  - update mount.cifs manpage to describe defaults better (BZ#1474539)


author: Sachin Prabhu <sprabhu@redhat.com> - 6.8-3
changelog:
  - Add manual gating tests
  - docs: cleanup rst formating
  - mount.cifs.rst: document new (no)handlecache mount option
  - manpage: update mount.cifs manpage with info about rdma option
  - checkopts: add python script to cross check mount options
  - mount.cifs.rst: document missing options, correct wrong ones
  - checkopts: report duplicated options in man page
  - mount.cifs.rst: more cleanups
  - mount.cifs.rst: document vers=3 mount option
  - mount.cifs.rst: document vers=3.02 mount option
  - cifs: Allow DNS resolver key to expire
  - mount.cifs: be more verbose and helpful regarding mount errors
  - Update mount.cifs with vers=default mount option and SMBv3.0.2
  - mount.cifs.rst: update vers=3.1.1 option description
  - getcifsacl: Do not go to parse_sec_desc if getxattr fails.
  - getcifsacl: Improve help usage and add -h option.
  - setcifsacl: fix adding ACE when owner sid in unexpected location
  - cifs.upcall: fix a compiler warning
  - mount.cifs Add various missing parms from the help text
  - mount.cifs: add more options to help message
  - mount.cifs: detect GMT format of snapshot version
  - Update man page for mount.cifs to add new options
  - mount.cifs.rst: mention kernel version for snapshots
  - Fix authors and maintainers


author: Martin Pitt <mpitt@redhat.com> - 189-1
changelog:
  - Add search box to Services page rhbz#1657752
  - Connect to firewalld as superuser rhbz#1664158
  - Fix log filtering rhbz#1665421
  - Show error message for invalid IdM domain names rhbz#1659333
  - Changing passwords as root does not ask for current password rhbz#1666005


author: Martin Pitt <mpitt@redhat.com> - 191-1
changelog:
  - System: Enable/disable SMT rhbz#1678956
  - Logs: Add service filtering rhbz#1657756
  - Networking: Add custom firewall ports rhbz#1660400


author: Martin Pitt <mpitt@redhat.com> - 196-1
changelog:
  - Networking: Add Firewall Zones configuration rhbz#1678473
  - Fix ssh login to unknown hosts rhbz#1701174
  - Fix login when ~/.bashrc prints to stdout rhbz#1716223
  - Much better On/Off buttons, also avoid text overlap rhbz#1677593


author: Martin Pitt <mpitt@redhat.com> - 196.1-1
changelog:
  - networkmanager: Show correct IPv6 route metric in dialog (rhbz#1719575)
  - networkmanager: Ensure that endianess is always set (rhbz#1728213)
  - Update translations (rhbz#1689977)


author: Matej Marusak <mmmarusak@redhat.com> - 209-1
changelog:
  - New overview design
  - Session timeouts
  - Banners on login screen
  - Client certificate authentication
  - Dropped support for pam_rhost


author: Martin Pitt <mpitt@redhat.com> - 210-1
changelog:
  - Overview: Add CPU utilization to usage card
  - Dashboard: Support SSH identity unlocking when adding new machines
  - SElinux: Introduce an Ansible automation script
  - Translation updates (partially fixes rhbz#1754958)


author: Martin Pitt <mpitt@redhat.com> - 211-1
changelog:
  - Fix HTTPS requests > 4 KiB (rhbz#1785509)
  - Better support for various TLS certificate formats
  - Switch from Zanata to Weblate
  - Overview layout optimizations
  - Translation updates (rhbz#1754958)


author: Martin Pitt <mpitt@redhat.com> - 211.1-1
changelog:
  - system: Fix graph layout across all browsers (rhbz#1792623)
  - websocket: Fix unaligned access in send_prefixed_message_rfc6455()


author: Matej Marusak <mmarusak@redhat.com> - 211.2-1
changelog:
  - Users: Fix reboot warnings of changed roles
  - Translation updates (rhbz#1754958)
  - Fix CPU mitigations to recognize kernel options at the beginning of line


author: Matej Marusak <mmarusak@redhat.com> - 220-1
changelog:
  - New navigation with integrated switching of hosts
  - Logs: Inline help for filtering
  - Fix cockpit-system AppStream dependency (rhbz#1838003)


author: Martin Pitt <mpitt@redhat.com> - 221-1
changelog:
  - Support for Cross-Origin-Resource-Policy
  - Accounts: Some buttons are hidden when access is limited
  - Developers: Importing "base1/patternfly.css" is deprecated
  - Translation updates (rhbz#1820538)


author: Martin Pitt <mpitt@redhat.com> - 221.1-1
changelog:
  - Put back missing base1/patternfly.css
  - Services: Don't offer 'Start Service' in Limited Access mode


author: Matej Marusak <mmarusak@redhat.com> - 222-1
changelog:
  - Logs: More flexible text filters
  - Services, Dashboard: Hide some buttons when access is limited
  - Webserver: Lock down cockpit.service privileges
  - Localization updates (rhbz#1820538)


author: Martin Pitt <mpitt@redhat.com> - 223-1
changelog:
  - Webserver: Standard-conformant lifetime of web server Certificate
  - Support certificate authentication against Active Directory
  - Fix cockpit-desktop privileges (rhbz#1841104)
  - Translation updates (rhbz#1820538)


author: Matej Marusak <mmarusak@redhat.com> - 224.2-1
changelog:
  - lib: Include current directory in FileAutoComplete option listing (rhbz#1866995)
  - lib: Make sure that the expandable part of table rows has unique key (rhbz#1865821)


author: Matej Marusak <mmarusak@redhat.com> - 219-1
changelog:
  - Rebase to upstream version 219
  - Accept upper-case login names for ssh/polkit agent challenges (rhbz#1825749)
  - Show last/failed login (rhbz#1784772)
  - Modernize services page (rhbz#1791193)
  - Search in journal (rhbz#1710731)
  - The default mode is not consistent with the mode in the created bond (rhbz#1817948)
  - Fix deadlock in channel pressure handling (rhbz#1751783)


author: Katerina Koukiou <kkoukiou@redht.com> - 233.1-1
changelog:
  - Non-admin users no longer see Cockpit in motd (rhbz#1872562)
  - Improved host editing
  - Replace system's graph page with a completely new USE method page
  - Logging of remote IP addresses
  - shell: Any page can be the shell
  - Accounts: Allow setting weak passwords (rhbz#1652390)
  - Terminal: Fix issue with prompt not returning when clicking reset button in disoconnected session (rhbz#1897430)


author: Martin Pitt <mpitt@redhat.com> - 235-1
changelog:
  - Login: Improved handling of SSH host keys
  - Overview: Editable motd
  - Adjust tests for sos 4.x to fix gating tests (rhbz#1895912)


author: Martin Pitt <mpitt@redhat.com> - 238-1
changelog:
  - Web server: Preserve permissions of administrator-provided certificates
  - System: Performance page shows busiest CPU cores


author: Martin Pitt <mpitt@redhat.com> - 238.1-1
changelog:
  - Several UI alignment fixes
  - Re-drop unit tests from built packages
  - Metrics: Don't show swap column when no swap is present
  - Metrics: Don't show duplicate events


author: Matej Marusak <mmarusak@redhat.com> - 242-1
changelog:
  - Network: Fix device connection button (rhbz#1946874)
  - Network: Fully show MAC dropdown in add bond dialog (rhbz#1946877)


author: Katerina Koukiou <kkoukiou@redhat.com> - 244.1-1
changelog:
  - Shell: sudo is invoked only when explicitly requested
  - Dynamically manage motd/issue symlinks in package scripts (rhbz#1876848)


author: Martin Pitt <mpitt@redhat.com> - 250-1
changelog:
  - Shell: Improve admin switcher and session menu
  - Update Insights links to point to console.redhat.com (rhbz#1984841)


author: Martin Pitt <mpitt@redhat.com> - 255-1
changelog:
  - Restrict frame embedding to same origin (rhbz#1984902, CVE-2021-3660)
  - kdump: Show "Directory" field for NFS mounts (rbhz#2004041)


author: Katerina Koukiou <kkoukiou@redhat.com> - 257-1
changelog:
  - Support for reading TLS certificates with any permissions
  - cockpit-ws no longer supports merged certificates
  - Services: Show user-owned systemd units (rhbz#1792270)


author: Martin Pitt <mpitt@redhat.com> - 260-1
changelog:
  - Certificate login validation (rhbz#1992620, CVE-2021-3698)
  - Client: Show previously used hosts
  - Client: Support port specification
  - bridge: Warning on missing cockpit-system package


author: Martin Pitt <mpitt@redhat.com> - 263-1
changelog:
  - Overview: Show scheduled shutdowns
  - Networking: Add firewall service description
  - Shell: Fix browser history


author: Martin Pitt <mpitt@redhat.com> - 264-1
changelog:
  - Metrics: Improve layout on small resolutions
   - Networking: Fix checkpoint handling and IP settings dialog (rhbz#2056386)
   - Services: Show error message instead of eternal "Loading..." state
   - Accounts: Add override button to confirm weak password
   - Accounts: Fix parsing of "last login" date


author: Martin Pitt <mpitt@redhat.com> - 264.2-1
changelog:
  - login: Use valid selectors when testing for :is() / :where() support (rhbz#2129055)
  - Don't run sudo without explicit request (rhbz#2129058)


author: Matej Marusak <mmarusak@redhat.com> - 269-1
changelog:
  - Kdump: Show journal when service fails (rhbz#2062297)
   - Parse /proc/cpuinfo on s390x (rhbz#2069552)
   - bridge: Default "init-superuser" to "none" (rhbz#2071938)
   - Animate new rows in lists
   - Crypto policies support
   - Metrics: Show busiest CPU core
   - Metrics: Show Podman containers in top CPU and memory lists
   - Standardize on SI-based units for data sizes and rates


author: Martin Pitt <mpitt@redhat.com> - 270-1
changelog:
  - Services: User-created timer deletion
   - System Diagnostics: Working with diagnostic reports has been improved


author: Martin Pitt <mpitt@redhat.com> - 273-1
changelog:
  - Metrics: Display CPU temperature
   - Networking: Suggest netmask and gateway addresses
   - Software Updates: Optionally reboot after updating
   - cockpit/ws container: Support modern SSH keys


author: Katerina Koukiou <kkoukiou@redhat.com> - 282-1
changelog:
  - Add right-to-left language support
  - Accounts: Redesign and include groups
  - Dark theme switcher
  - tools: Disallow root login by default


author: Martin Pitt <mpitt@redhat.com> - 286.1-1
changelog:
  - Users: Fix broken alignment of the first column in groups table
  - Translation updates (rhbz#2139715)


author: Packit <hello@packit.dev> - 299-1
changelog:
  - Kdump: Show location of kdump to verify the successful configuration test
  - Storage: Support for no-overprovisioning with Stratis
  - Storage: Cockpit can now add caches to encrypted Stratis pools


author: Packit <hello@packit.dev> - 300-1
changelog:
  - Celebrating the Nürnberg life release!
  - Storage: Support for growing block devices of a Stratis pool


author: Kamil Dudka <kdudka@redhat.com> - 8.30-5
changelog:
  - sync: fix open() fallback bug (#1602463)
  - fix implicit declaration warning in coreutils-getgrouplist.patch (#1602463)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-8
changelog:
  - df --local: recognize afs, auristorfs, and smb3 as remote fs (#1798030)
  - fix formatting of sha512sum(1) man page (#1688744)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-9
changelog:
  - split: fix --number=K/N to output correct part of file (#1921246)
  - rm: do not skip files upon failure to remove an empty dir (#1905481)
  - use statx instead of stat when available (#1760300)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-13
changelog:
  - ls, stat: avoid triggering automounts (#2044981)
  - make `df --direct` work again (#2058686)
  - doc: improve description of the --kibibytes option of ls (#1527391)


author: Kamil Dudka <kdudka@redhat.com> - 8.29-5
changelog:
  - drop BR for bison, which is not used during the build
  - make sure that parse-datetime.{c,y} ends up in debuginfo (#1555079)
  - fix build failure with glibc-2.28


author: Kamil Dudka <kdudka@redhat.com> - 8.29-7
changelog:
  - add provides to coreutils-single to make it a drop-in replacement (#1572693)
  - reintroduce very old Provides (mktemp, sh-utils, textwrap, fileutils, stat)


author: Kamil Dudka <kdudka@redhat.com> - 8.29-8
changelog:
  - ls: increase the allowed abmon width from 5 to 12 (#1577872)
  - date, ls: pick strftime fixes from glibc to improve locale support (#1577872)


author: Ondrej Vasik <ovasik@redhat.com> - 2.11-36
changelog:
  - in 2015, file name in CVE-2014-9112 shows in a bit different timestamp
    format (fix FTBFS, #1239416)


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 2.9.6-8
changelog:
  - Python 2 binary package renamed to python2-cracklib
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: John W. Linville <linville@redhat.com> - 3.18_2016.02.08-1
changelog:
  - Update wireless-regdb to version 2016.02.08
  - Do not treat unused-const-variable warnings as errors


author: Stanislaw Gruszka <sgruszka@redhat.com> - 3.18_2018.05.31-2
changelog:
  - Update wireless-regdb to 2018.05.31
  - Remove python2 dependency
  - Use sforshee signed reulatory.bin (required by modern kernels)


author: Ondřej Pohořelský <opohorel@redhat.com> - 1.11-17.20190603git
changelog:
  - update to the latest release
  - add sed require
  - remove %clean section
  - remove obsolete Group tag
  - fix upstream URL
  - Resolves: rhbz#1696449, rhbz#1703982


author: Tomáš Mráz <tmraz@redhat.com> - 20181122-1.git70769d9
changelog:
  - update-crypto-policies: fix error on multiple matches in local.d
  - Print warning when update-crypto-policies --set is used in the FIPS mode
  - Java: Add 3DES and RC4 to legacy algorithms in LEGACY policy
  - OpenSSL: Properly disable non AEAD and AES128 ciphersuites in FUTURE
  - libreswan: Add chacha20_poly1305 to all policies and drop ikev1 from LEGACY


author: Tomáš Mráz <tmraz@redhat.com> - 20181217-1.git9a35207
changelog:
  - update-crypto-policies: Fix endless loop
  - update-crypto-policies: Add warning about the need of system restart
  - fips-mode-setup: Use grub2-editenv to modify the kernelopts for BLS


author: Tomáš Mráz <tmraz@redhat.com> - 20190613-1.git21ffdc8
changelog:
  - openssh: add missing curve25519-sha256 to the key exchange list
  - openssh: fix RSA certificate support
  - fips-mode-setup: drop the kernel boot option if there is no separate
    /boot drive
  - fips-finish-install: regenerate all initramdisks
  - add libssh configuration backend


author: Tomáš Mráz <tmraz@redhat.com> - 20190613-2.git21ffdc8
changelog:
  - fix ownership of policy directories
  - nss: enable X25519 in appropriate policies and conflict with old nss
  - openssh: conflict with old incompatible openssh version


author: Tomáš Mráz <tmraz@redhat.com> - 20191022-1.gite17cc3a
changelog:
  - custom crypto policies support
  - update-crypto-policies: fix handling of list operations in policy modules
  - update-crypto-policies: fix updating of the current policy marker
  - fips-mode-setup: fixes related to containers and non-root execution
  - make it possible to use fips-mode-setup --check without dracut
  - add .config symlinks so a crypto policy can be set with read-only
    /etc by bind-mounting /usr/share/crypto-policies/<policy> to
    /etc/crypto-policies/back-ends
  - run the update-crypto-policies in posttrans


author: Tomáš Mráz <tmraz@redhat.com> - 20200527-2.git63fc906
changelog:
  - explicitly enable DHE-DSS in gnutls config if enabled in policy
  - use grubby with --update-kernel=ALL to avoid breaking kernelopts
  - OSPP subpolicy: Allow GCM for SSH protocol
  - openssh: Support newly standardized ECDHE-GSS and DHE-GSS key exchanges
  - if the policy in FIPS mode is not a FIPS policy print a message
  - openssl: Add SignatureAlgorithms support
  - custom crypto policies: enable completely overriding contents of the list
    value
  - added ECDHE-ONLY.pmod policy module example
  - openssh: make LEGACY policy to prefer strong public key algorithms
  - various python code cleanups
  - update-crypto-policies: dump the current policy to
    /etc/crypto-policies/state/CURRENT.pol
  - split scripts into their own subpackage


author: Tomáš Mráz <tmraz@redhat.com> - 20200610-1.git0ac8b1f
changelog:
  - fallback to FIPS policy instead of the default-config in FIPS mode
  - java: Document properly how to override the crypto policy
  - krb5: No support for 3des anymore
  - reorder the signature algorithms to follow the order in default openssl list


author: Alexander Sosedkin <asosedkin@redhat.com> - 20210617-1.gitc776d3e
changelog:
  - implement scoped policies, e.g., cipher@SSH = ... (#1960266)
  - implement algorithm globbing, e.g., cipher@SSH = -*-CBC
  - deprecate derived properties:
    tls_cipher, ssh_cipher, ssh_group, ike_protocol
  - deprecate sha1_in_dnssec property
  - deprecate unscoped form of protocol property
  - update documentation
  - expand upstream test coverage
  - openssl: set MinProtocol / MaxProtocol separately for TLS and DTLS (#1946522)
  - support AES-192 ciphers in custom policies for non-TLS scenarios (#1876846)
  - stop claiming Camellia is disabled (#1925104)
  - disable CBC ciphers in FUTURE for everything but Kerberos (#1933016)
  - drop SHA224 from signature algorithms in FIPS:OSPP (#1934755)
  - condition ecdh-sha2-nistp384 on SECP384R1


author: Alexander Sosedkin <asosedkin@redhat.com> - 20211116-1.gitae470d6
changelog:
  - OSPP: relax -ECDSA-SHA2-512, -FFDHE-*
  - fips-mode-setup, fips-finish-install: call zipl more often (s390x-specific)
  - libssh: enable diffie-hellman-group14-sha256 support
  - openssl: fix disabling ChaCha20


author: Alexander Sosedkin <asosedkin@redhat.com> - 20221215-1.gitece0092
changelog:
  - bind: expand the list of disableable algorithms
  - tests/java: fix java.security.disableSystemPropertiesFile=true
  - stop accidentally creating /etc/crypto-policies/back-ends/.config symlink


author: Alexander Sosedkin <asosedkin@redhat.com> - 20230731-1.git3177e06
changelog:
  - krb5: sort enctypes mac-first, cipher-second, prioritize SHA-2 ones
  - krb5: fix policy generator to account for macs
  - docs: replace `FIPS 140-2` with just `FIPS 140`


author: Ondrej Kozina <okozina@redhat.com> - 2.0.4-1
changelog:
  - Update to cryptsetup 2.0.4.
  - patch: Add RHEL system library paths in configure.
  - patch: Increase default LUKS2 header size to 8 MiBs.
  - patch: update tests to be compatible with larger headers.
  - Set default format to LUKS2.
  - Cleanup changelog.
  - Resolves: #1564540 #1595257 #1595266 #1595881 #1600164


author: Ondrej Kozina <okozina@redhat.com> - 2.0.4-2
changelog:
  - patch: fix device alignment bug when processing hinted
    value by device topology info.
  - Resolves: #1614219


author: Ondrej Kozina <okozina@redhat.com> - 2.0.6-1
changelog:
  - Update to cryptsetup 2.0.6
  - Enables all supported metadata sizes in LUKS2 validation code.
  - Resolves: #1653383


author: Ondrej Kozina <okozina@redhat.com> - 2.2.0-2
changelog:
  - patch: Fix mapped segments overflow on 32bit architectures.
  - patch: Take optimal io size in account with LUKS2 reencryption.
  - Resolves: #1742815 #1746532


author: Ondrej Kozina <okozina@redhat.com> - 2.2.2-1
changelog:
  - Update to cryptsetup 2.2.2
  - LUKS2 reencryption honors activation flags (one time and persistent).
  - LUKS2 reencryption works also without volume keys put in kernel
    keyring service.
  - Resolves: #1757783 #1750680 #1753597 #1743399

  - Resolves: #1742815 #1746532


author: Ondrej Kozina <okozina@redhat.com> - 2.2.2-1
changelog:
  - Update to cryptsetup 2.2.2
  - LUKS2 reencryption honors activation flags (one time and persistent).
  - LUKS2 reencryption works also without volume keys put in kernel
    keyring service.
  - Resolves: #1757783 #1750680 #1753597 #1743399


author: Ondrej Kozina <okozina@redhat.com> - 2.3.3-2
changelog:
  - patch: Fix possible memory corruption in LUKS2 validation
  	 code in 32bit library.
  - Resolves: #1872294


author: Ondrej Kozina <okozina@redhat.com> - 2.3.3-4
changelog:
  - patch: Fix reencryption for custom devices with data segments
    set to use cipher_null.
  - Resolves: #1927409


author: Ondrej Kozina <okozina@redhat.com> - 2.3.7-1
changelog:
  - update to cryptsetup 2.3.7
  - fixes CVE-2021-4122
  - patch: Fix suboptimal optimization in bundled argon2.
  - patch: Fix bogus memory allocation/device read with
           invalid LUKS2 headers
  - patch: Fix typo in luksRepair prompt.
  - Resolves: #2021815 #2022301 #2031859


author: Daniel Zatovic <dzatovic@redhat.com> - 2.3.7-4
changelog:
  - patch: Remove LUKS2 encryption data size restriction.
  - patch: Abort encryption when header and data devices are same.
  - Resolves: #2150254


author: Daniel Zatovic <dzatovic@redhat.com> - 2.3.7-6
changelog:
  - patch: Delegate FIPS mode detection to configured crypto backend
  - patch: Disallow use of internal kenrel crypto driver names in "capi"
  - patch: Also disallow active devices with internal kernel names
  - patch: Fix init_by_name to allow unknown cipher format in dm-crypt
  - patch: Fix reencryption to fail properly for unknown cipher
  - patch: Fix activation of LUKS2 with capi format cipher and kernel
  - Resolves: #2212772 #2193342


author: Andreas Schneider <asn@redhat.com> - 4.9.1-5
changelog:
  - resolves: #1644327 - Segfault if wrong 'passdb backend' is configured
  - resolves: #1647959 - Segfault in the debug system with hardended build


author: Andreas Schneider <asn@redhat.com> - 4.9.1-6
changelog:
  - resolves: #1642092 - Harden [homes] share export
  - resolves: #1648846 - Fix out of bound array access in ctdb
  - resolves: #1657266 - Fix tmp directory creation in /run


author: Andreas Schneider <asn@redhat.com> - 4.9.1-7
changelog:
  - resolves: #1658690 - Add smbc_setOptionProtocols()
  - resolves: #1658678 - Fix spoolss client operations against Windows


author: Andreas Schneider <asn@redhat.com> - 4.10.4-0
changelog:
  - related: #1638001 - Rebase to Samba version 4.10.4
  - resolves: #1597298 - Build Samba with python3
  - resolves: #1658558 - Add 'net ads leave --keep-account' option
  - resolves: #1669004 - Fix systemd status notifications
  - resolves: #1672167 - Fix printing cache timeout in debug output
  - resolves: #1696525 - Fix CVE-2019-3880


author: Andreas Schneider <asn@redhat.com> - 4.10.4-1
changelog:
  - resolves: #1712378 - Fix smbspool CUPS backend
  - resolves: #1696612 - Fix 'net ads join -U admin@parentdomain'


author: Andreas Schneider <asn@redhat.com> - 4.11.2-4
changelog:
  - related: #1754409 - Add patch to avoid overlinking with libnsl and libsocket
  - related: #1754409 - Fix permissions for pidl
  - related: #1754409 - Fix logrotate script
  - related: #1754409 - Add missing README files


author: Alexander Bokovoy <abokovoy@redhat.com> - 4.11.2-10
changelog:
  - resolves: #1790353 - Fix access check in DsRGetForestTrustInformation
  - resolves: #1791209 - Fix CVE-2019-14907


author: Andreas Schneider <asn@redhat.com> - 4.11.2-12
changelog:
  - related: #1781232 - Improve debug output of smbclient
  - resolves: #1794461 - Do not return bogus inode numbers in
                         cli_qpathinfo2()/cli_qpathinfo3() for SMB1
  - resolves: #1794442 - Fix segfault in smbd_do_qfilepathinfo()


author: Andreas Schneider <asn@redhat.com> - 4.12.3-1
changelog:
  - resolves: #1666737 - Add a new smbc_readdirplus2() function to libsmbclient
  - resolves: #1842844 - Fix GnuTLS priority list for TLS connections


author: Isaac Boukris <iboukris@redhat.com> - 4.12.3-4
changelog:
  - resolves: #1850980 - Add "additional dns hostname" to keytab
  - resolves: #1850981 - Add net-ads-join dnshostname=fqdn option


author: Andreas Schneider <asn@redhat.com> - 4.12.3-5
changelog:
  - resolves: #1823612 - Fix segfault in 'net ads dns gethostbyname'
  - resolves: #1792553 - Fix 'net ads join createcomputer=OU'


author: Andreas Schneider <asn@redhat.com> - 4.12.3-7
changelog:
  - resolves: #1855711 - Fix 'require_membership_of' documentation in
                         pam_winbind manpage


author: Andreas Schneider <asn@redhat.com> - 4.12.3-9
changelog:
  - related: #1817557 - Move DECRPC mdssvc data files to correct package
  - resolves: #1856676 - Fix lookuprids in winbind


author: Andreas Schneider <asn@redhat.com> - 4.13.2-1
changelog:
  - resolves: #1878109 - Rebase Samba to version 4.13.2
  - resolves: #1872833 - Add samba-winexe subpackage
  - resolves: #1891688 - Fix CVE-2020-14323
  - resolves: #1892633 - Fix CVE-2020-14318
  - resolves: #1892639 - Fix CVE-2020-14383
  - resolves: #1879835 - Fix CVE-2020-1472
  - resolves: #1888990 - Update smb.conf manpages to describe how to apply
                         config changes.
  - resolves: #1869702 - Fix %U substitution for 'valid users' option
  - resolves: #1818038 - Improve FIPS compliance


author: Andreas Schneider <asn@redhat.com> - 4.13.2-2
changelog:
  - related: #1869702 - Fix spoolss crash
  - resolves: #1896736 - Fix name lookups of FreeIPA users
  - resolves: #1899113 - Fix DFS links


author: Andreas Schneider <asn@redhat.com> - 4.13.3-3
changelog:
  - resolves: #1924615 - Fix a memcache bug when cache is full
  - resolves: #1924571 - Ensure that libwbclient has been updated before
                         restarting services


author: Andreas Schneider <asn@redhat.com> - 4.13.3-4
changelog:
  - resolves: #1964314 - Fix ldconfig warning about libsmbldap.so.2
  - resolves: #1964398 - Fix smbd trying to delete files with wrong permissions
  - resolves: #1969831 - Fix memory leak in RPC server


author: Andreas Schneider <asn@redhat.com> - 4.14.4-0
changelog:
  - related: rhbz#1944657 - Update to version 4.14.5
  - resolves: rhbz#1969787 - Fix memory leak in RPC server
  - resolves: rhbz#1954974 - Validate smb.conf option for domain members with testparm
  - resolves: rhbz#1963298 - Fix smbd trying to delete files with wrong permissions
  - resolves: rhbz#1890008 - Update rpcclient manpage to list all available commands
  - resolves: rhbz#1857254 - Update smbcacls manpage to document inhertance flags


author: Andreas Schneider <asn@redhat.com> - 4.14.4-1
changelog:
  - resolves: rhbz#1974792 - Create a subpackage for vfs-io-uring
  - resolves: rhbz#1965397 - Raise log level for dfs ENOENT debug message


author: Andreas Schneider <asn@redhat.com> - 4.14.4-4
changelog:
  - resolves: rhbz#2021163
    Fix CVE-2016-2124
  - resolves: rhbz#2021167
    Fix CVE-2021-23192
  - resolves: rhbz#2021171
    Fix CVE-2020-25717


author: Andreas Schneider <asn@redhat.com> - 4.14.5-5
changelog:
  - resolves: rhbz#2021493 - Add missing PAC buffer types to krb5pac.idl
  - related: rbhz#2021171 - Fix regression with 'allow trusted domains = no'


author: Andreas Schneider <asn@redhat.com> - 4.14.5-9
changelog:
  - resolves: rhbz#2046174 - Fix username map script regression of CVE-2020-25717
  - resolves: rhbz#2046160 - Fix possible segfault while joining a domain
  - resolves: rhbz#2046152 - Fix CVE-2021-44142


author: Andreas Schneider <asn@redhat.com> - 4.14.4-2
changelog:
  - resolves: rhbz#1944657 - Update to version 4.14.4
  - resolves: rhbz#1949445 - Fix CVE-2021-20254
  - resolves: rhbz#1947945 - Fix libsmbldap.so.2 not being a symbolic link
  - resolves: rhbz#1908506 - Fix creating the gencache user directory
  - resolves: rhbz#1901029 - Build the vfs_io_uring module


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.4-0
changelog:
  - Update to Samba 4.15.4
  - related: rhbz#2013596 - Rebase Samba to the the latest 4.15.x release
  - resolves: rhbz#2039153 - Fix CVE-2021-20316
  - resolves: rhbz#1912549 - Winexe: Kerberos flag not invoking Kerberos Auth
  - resolves: rhbz#2039157 - Fix CVE-2021-43566
  - resolves: rhbz#2038148 - Failed to authenticate users after upgrade samba package to release samba-4.14.5-7
  - resolves: rhbz#2035528 - [smb] Segmentation fault when joining the domain
  - resolves: rhbz#2038796 - filename_convert_internal: open_pathref_fsp [xxx] failed: NT_STATUS_ACCESS_DENIED


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.5-0
changelog:
  - Update to Samba 4.15.5
  - related: rhbz#2013596 - Rebase Samba to the the latest 4.15.x release
  - resolves: rhbz#2046127 - Fix CVE-2021-44141
  - resolves: rhbz#2046153 - Fix CVE-2021-44142
  - resolves: rhbz#2044404 - Printing no longer works on Windows 7
  - resolves: rhbz#2043154 - Fix systemd notifications
  - resolves: rhbz#2049602 - Disable NTLMSSP for ldap client connections (e.g. libads)


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.5-1
changelog:
  - resolves: #1995849 - [RFE] Change change password change prompt phrasing
  - resolves: #2029417 - virusfilter_vfs_openat: Not scanned: Directory or special file


author: Andreas Schneider <asn@redhat.com> - 4.15.5-5
changelog:
  - resolves: rhbz#2064325 - Fix 'create krb5 conf = yes` when a KDC has a
                             single IP address.


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.5-8
changelog:
  - resolves: rhbz#2079303 - Fix username map for unix groups
  - resolves: rhbz#2079299 - PAM Kerberos authentication fails with a clock skew error
  - resolves: rhbz#2079304 - Fix UPNs handling in lookup_name*() calls


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.2-1
changelog:
  - resolves: rhbz#2013596 - Rebase to version 4.15.2
  - resolves: rhbz#1999294 - Remove noisy error message in winbindd
  - resolves: rhbz#1958881 - Don't require winbind being online for krb5 auth
                             with one-way trusts
  - resolves: rhbz#2019461 - Fix deleting directories with dangling symlinks


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.3-1
changelog:
  - related: rhbz#2013596 - Rebase to version 4.15.3
  - resolves: rhbz#2028029 - Fix possible null pointer dereference in winbind
  - resolves: rhbz#1912549 - Winexe: Kerberos Auth is respected via --use-kerberos=desired


author: Pavel Filipenský <pfilipen@redhat.com> - 4.15.5-6
changelog:
  - resolves: rhbz#2059151 - Fix username map for unix groups
  - resolves: rhbz#2065212 - Fix 'create krb5 conf = yes` when a KDC has a single IP address.


author: Pavel Filipenský <pfilipen@redhat.com> - 4.16.3-0
changelog:
  - related: rhbz#2077468 - Rebase Samba to 4.16.3
  - resolves: rhbz#2106672 - The pcap background queue process should not be stopped
  - resolves: rhbz#2106263 - Fix crash in rpcd_classic
  - resolves: rhbz#2100093 - Fix net ads info returns LDAP server and LDAP server name


author: Pavel Filipenský <pfilipen@redhat.com> - 4.16.4-5
changelog:
  - resolves: rhbz#2170394 - Fix share enum
  - resolves: rhbz#2170467 - Add to package ctdb dependency for package samba-winbind-clients
  - resolves: rhbz#2170468 - Add package dcerpc - fix winbind to retrieve user groups from AD
  - resolves: rhbz#2170469 - Create package samba-tools


author: Andreas Schneider <asn@redhat.com> - 4.17.2-1
changelog:
  - resolves: rhbz#2132051 - Update to version 4.17.2
  - resolves: rhbz#2126174 - Fix CVE-2022-1615
  - resolves: rhbz#2108487 - ctdb: Add dependency to samba-winbind-clients


author: Pavel Filipenský <pfilipen@redhat.com> - 4.17.2-2
changelog:
  - Always add epoch to samba_depver to fix osci.brew-build.rpmdeplint.functional
  - related: rhbz#2132051


author: Pavel Filipenský <pfilipenn@redhat.com> - 4.17.4-0
changelog:
  - related: rhbz#2132051 - Update to version 4.17.4
  - resolves: rhbz#2154370 - Fix CVE-2022-38023
  - resolves: rhbz#2142331 - Fix %U include directive for share listing (netshareenum)
  - resolves: rhbz#2148943 - Fix Winbind to retrieve user groups from Active Directory


author: Pavel Filipenský <pfilipen@redhat.com> - 4.17.5-2
changelog:
  - resolves: rhbz#2169339 - Fix winbind memory leak
  - resolves: rhbz#2152899 - Fix Samba shares not accessible issue


author: Pavel Filipenský <pfilipen@redhat.com> - 4.18.4-1
changelog:
  - resolves: rhbz#2221594 - Fix broken symlink for libwbclient
  - resolves: rhbz#2221600 - Fix segfault of winbind child when listing users with `winbind scan trusted domains = yes`
  - resolves: rhbz#2175385 - Fix access of Samba share with veto files = /.*/
  - resolves: rhbz#2218237 - Fix Python tarfile extraction to avoid a warning


author: Pavel Filipenský <pfilipen@redhat.com> - 4.18.5-0
changelog:
  - resolves: rhbz#2222894 - Fix CVE-2022-2127 CVE-2023-3347 CVE-2023-34966 CVE-2023-34967 CVE-2023-34968


author: Andreas Schneider <asn@redhat.com> - 4.18.6-1
changelog:
  - related: rhbz#2190417 - Update to version 4.18.6
  - resolves: rhbz#2232564 - Fix the rpc dsgetinfo command


author: Eduard Abdullin <eabdullin@almalinux.org> - 4.18.6-2.alma.1
changelog:
  - CVE-2023-3961:s3:smbd: Catch any incoming pipe path that
   could exit socket_dir.
  - CVE-2023-4091: smbtorture: test overwrite dispositions on
   read-only file
  - CVE-2023-42669 s4-rpc_server: Disable rpcecho server by
   default


author: Eduard Abdullin <eabdullin@almalinux.org> - 4.18.6-3.alma.1
changelog:
  - Fix libnss_winbind causes memory corruption since samba-4.18,
   impacts sendmail, zabbix, potentially more


author: Pavel Filipenský <pfilipen@redhat.com> - 4.19.3-1
changelog:
  - resolves: RHEL-16483 - Update to version 4.19.3
  - resolves: RHEL-11361
              - Fix CVE-2023-3961 CVE-2023-4091 CVE-2023-42669
  - resolves: RHEL-2228  - Logging Format Enhancement
  - resolves: RHEL-1965  - Fix smbget issues with DFS shares
  - resolves: RHEL-2108  - Fix force user/group issues with 'allow trusted domains = yes'
  - resolves: RHEL-17122 - Fix memory corruption in libnss_winbind


author: Pavel Filipenský <pfilipen@redhat.com> - 4.19.4-2
changelog:
  - Fix error in PREIN scriptlet in rpm package samba-common
  - related: RHEL-16483 - Update to version 4.19.4


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-21
changelog:
  - 1602469 - fixed covscan issues
  - 1625899 - cups 2.2.6 lpr command fails against old cups 1.3.9 server
  - 1625913 - ssl options aren't initialized when no SSLOptions directive is set in /etc/cups/client.conf
  - 1618009 - Enabling cups.path causes high load when jobs are submitted to CUPS
  - 1630805 - Make cups systemd unit files more upstream-like


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-22
changelog:
  - 1622431 - Jobs with multiple files don't complete when backend fails
  - CVE-2018-4700 cups: Predictable session cookie breaks CSRF protection [rhel-8]


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-30
changelog:
  - 1774462 - CVE-2019-8675 - buffer overflow in SNMP and IPP, memory disclosure and DoS in scheduler
  - 1774463 - CVE-2019-8696


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-35
changelog:
  - 1825254 - CVE-2020-3898 cups: heap based buffer overflow in libcups's ppdFindOption() in ppd-mark.c


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-36
changelog:
  - 1838449 - ipp/socket backends connect to turned off device for eternity (contimeout is not applied)
  - 1689207 - Add failover backend
  - 1833516 - DirtyCleanInterval ignored if there are open client connections


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-39
changelog:
  - 1941437 - cupsd doesn't log job ids when logging into journal
  - 1782216 - Print queue is paused after ipp backend ends with CUPS_BACKEND_STOP
  - 1938384 - CUPS doesn't start if sssd starts after cupsd


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-40
changelog:
  - 1955964 - PreserveJobHistory doesn't work with seconds
  - 1927452 - CVE-2020-10001 cups: access to uninitialized buffer in ipp.c [rhel-8]


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-41
changelog:
  - 2006987 - Unauthenticated users can't move print jobs in Web UI
  - 2017919 - Setting 'MaxJobTime 0' does not set a job time to unlimited
  - 1726383 - "lpadmin -p <queue> -o cupsSNMPSupplies:false" doesn't work
  - 1982891 - Printing of banner before PCL file only prints banner
  - 2006591 - Trying to restart and hold a job doesn't work
  - 1811716 - lpr to non-existent printer reports incorrect error


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-46
changelog:
  - 2074684 - lp to a remote server takes a long time
  - 2074736 - CUPS is too chatty about "Removing document files." in debug mode


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-52
changelog:
  - 2217178 - Delays printing to lpd when reserved ports are exhausted
  - 2217283 - The command "cancel -x <job>" does not remove job files
  - 2217955 - Enlarge backlog queue for listen() in cupsd
  - CVE-2023-34241 cups: use-after-free in cupsdAcceptClient() in scheduler/client.c
  - CVE-2023-32324 cups: heap buffer overflow may lead to DoS


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-55
changelog:
  - RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
  - RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-56
changelog:
  - RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
  - RHEL-19200 Recommend new cups-filters subpackages with weak dep for better upgrade exp


author: Pavol Zacik <pzacik@redhat.com> - 1:2.2.6-60
changelog:
  - RHEL-40386 cups: Cupsd Listen arbitrary chmod 0140777
  - Delete the domain socket file after stopping the cups.socket service
  - Fix cupsd Listener checks


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-6
changelog:
  - SASL password overflow via integer overflow (CVE-2018-16839)
  - fix use-after-free in handle close (CVE-2018-16840)
  - fix bad arethmetic when outputting warnings to stderr (CVE-2018-16842)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-10
changelog:
  - fix SMTP end-of-response out-of-bounds read (CVE-2019-3823)
  - fix NTLMv2 type-3 header stack buffer overflow (CVE-2019-3822)
  - fix NTLM type-2 out-of-bounds buffer read (CVE-2018-16890)
  - xattr: strip credentials from any URL that is stored (CVE-2018-20483)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-12
changelog:
  - double free due to subsequent call of realloc() (CVE-2019-5481)
  - fix heap buffer overflow in function tftp_receive_packet() (CVE-2019-5482)
  - fix TFTP receive buffer overflow (CVE-2019-5436)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-15
changelog:
  - do not crash when HTTPS_PROXY and NO_PROXY are used together (#1873327)
  - libcurl: wrong connect-only connection (CVE-2020-8231)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-18
changelog:
  - http: send payload when (proxy) authentication is done (#1918692)
  - curl: Inferior OCSP verification (CVE-2020-8286)
  - libcurl: FTP wildcard stack overflow (CVE-2020-8285)
  - curl: trusting FTP PASV responses (CVE-2020-8284)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-18.el8_4.1
changelog:
  - fix bad connection reuse due to flawed path name checks (CVE-2021-22924)
  - disable metalink support to fix the following vulnerabilities
      CVE-2021-22923 - metalink download sends credentials
      CVE-2021-22922 - wrong content via metalink not discarded


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-18.el8_4.2
changelog:
  - fix STARTTLS protocol injection via MITM (CVE-2021-22947)
  - fix protocol downgrade required TLS bypass (CVE-2021-22946)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-19
changelog:
  - make `curl --head file://` work as expected (#1947493)
  - prevent automatic referer from leaking credentials (CVE-2021-22876)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-21
changelog:
  - fix TELNET stack contents disclosure again (CVE-2021-22925)
  - fix TELNET stack contents disclosure (CVE-2021-22898)
  - fix bad connection reuse due to flawed path name checks (CVE-2021-22924)
  - disable metalink support to fix the following vulnerabilities
      CVE-2021-22923 - metalink download sends credentials
      CVE-2021-22922 - wrong content via metalink not discarded


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-22.el8_6.1
changelog:
  - fix credential leak on redirect (CVE-2022-27774)
  - fix auth/cookie leak on redirect (CVE-2022-27776)
  - fix OAUTH2 bearer bypass in connection re-use (CVE-2022-22576)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-22.el8_6.4
changelog:
  - fix HTTP compression denial of service (CVE-2022-32206)
  - fix FTP-KRB bad message verification (CVE-2022-32208)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-24
changelog:
  - fix too eager reuse of TLS and SSH connections (CVE-2022-27782)
  - fix invalid type in printf() argument detected by Coverity


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-25
changelog:
  - setopt: enable CURLOPT_SSH_KNOWNHOSTS and CURLOPT_SSH_KEYFUNCTION (#2063703)
  - fix HTTP compression denial of service (CVE-2022-32206)
  - fix FTP-KRB bad message verification (CVE-2022-32208)


author: Jacek Migacz <jmigacz@redhat.com> - 7.61.1-30.el8_8.3
changelog:
  - fix GSS delegation too eager connection re-use (CVE-2023-27536)
  - rebuild certs with 2048-bit RSA keys
  - fix host name wildcard checking (CVE-2023-28321)


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-31
changelog:
  - fix GSS delegation too eager connection re-use (CVE-2023-27536)
  - fix FTP too eager connection reuse (CVE-2023-27535)


author: Jacek Migacz <jmigacz@redhat.com> - 7.61.1-33.el8_9.4
changelog:
  - unify the upload/method handling (CVE-2023-28322)
  - fix HTTP2 connection failure with HTTP2 framing layer (RHEL-15296)
  - lowercase the domain names before PSL checks (CVE-2023-46218)


author: Jacek Migacz <jmigacz@redhat.com> - 7.61.1-34
changelog:
  - when keyboard-interactive auth fails, try password (#2229800)
  - cap SFTP packet size sent (RHEL-5311)
  - unify the upload/method handling (CVE-2023-28322)
  - fix cookie injection with none file (CVE-2023-38546)
  - fix HTTP2 connection failure with HTTP2 framing layer (RHEL-5657)
  - lowercase the domain names before PSL checks (CVE-2023-46218)


author: Jacek Migacz <jmigacz@redhat.com> - 7.61.1-34.el8_10.3
changelog:
  - asyn-thread: create a socketpair to wait on (RHEL-34906)
  - fix crash, when talking to a NTLM proxy in FIPS mode (RHEL-32641)


author: Simo Sorce <simo@redhat.com> - 2.1.27-0.4rc7
changelog:
  - Add patch form Upstream PR559 to use RC4 implementation from OpenSSL
  - Resolves bz#1618744
  - Fix multilib issue bz#1663120


author: Jeff Moyer <jmoyer@redhat.com> - 67-1.el8
changelog:
  - Rebase to v67.  This brings in the following features:
    - support for the 'security frozen' sysfs attribute
    - support for using pmem as system ram
    - various cleanup and bug fixes
  - Fix load-keys failure in initramfs (Jeff Moyer)
  - Resolves: bz#1724531 bz#1730673 bz#1741164 bz#1741165 bz#1749888 bz#1749889


author: Jeff Moyer <jmoyer@redhat.com> - 71.1-4.el8
changelog:
  - Pull in fixes from upstream v72 and v73 (Jeff Moyer)
    - Fix enable-namespace all reporting errors incorrectly
    - Add support for inject-smart on papr scm
  - Related: bz#2090190 bz#1986185 bz#2040074


author: David Herrmann <dh.herrmann@gmail.com> - 1:1.12.8-2
changelog:
  - Extract 'dbus-tools' package from 'dbus-daemon' to provide all command-line
    utilities independent of the actual message bus. They are valid to be used
    with independent message-bus implementations, so they should not needlessly
    pull in dbus-daemon.


author: Martin Pitt <mpitt@redhat.com>
changelog:
  - Drop unpublished -doc package to fix FTBFS rhbz#1640736
  - Add dist-git smoketest rhbz#1625683
  - Move dbus system user creation to correct package rhbz#1634496


author: Ray Strode <rstrode@redhat.com> - 1:1.12.8-22
changelog:
  - Use hangup signal instead of termination signal to
    kill sesssion monitoring script to appeach tcsh.
    Related: #2089362


author: Ray Strode <rstrode@redhat.com> - 1:1.12.8-23
changelog:
  - Address race for very short running sessions in SSH
    session monitoring script.
    Related: #2089362


author: Ray Strode <rstrode@redhat.com> - 1.12.8-25
changelog:
  - Ensure only one dbus-daemon is spawned for all shells sharing
    a single connection.
    Resolves: #2189201


author: David Herrmann <dh.herrmann@gmail.com> - 1:1.12.8-1
changelog:
  - Extract 'dbus-common' package from 'dbus-daemon' to provide XML configuration
    and setup files as independent package ready for alternative Message Bus
    implementations to be used.


author: David King <amigadave@amigadave.com> - 0.104-1
changelog:
  - Update to 0.104
  - Remove RPATH
  - Remove executable bit from sourced script
  - Move man page to main package and update glob
  - Make the build output more verbose


author: Till Maas <opensource@till.name> - 0.104-2
changelog:
  - Rebuilt for Fedora 23 Change
    https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code


author: Peter Jones <pjones@redhat.com> - 8-1
changelog:
  - Update to dbxtool 8
  - Make a "make coverity" rule to scan the source
    Results at: https://scan.coverity.com/projects/rhboot-dbxtool
  - Don't try to apply anything if PK and KEK aren't enrolled
  - Add --force and --quiet for the PK/KEK checker, and use them in the
    systemd service.
    Resolves: rhbz#1489942
  - Add a .syntastic_c_config for vim's Syntastic modules
  - Use tsearch()/tfind()/tdestroy() from libc instead of ccan htables
  - Don't open the dbx file with O_RDWR|O_CREAT, use O_RDONLY.
  - Lots of minor bug fixes gcc -Wextra and friends found.


author: Peter Jones <pjones@redhat.com> - 8-2
changelog:
  - Don't use -f in dbxtool.service; that'll make it do the thing we're
    trying to avoid.
    Resolves: rhbz#1489942


author: Marian Csontos <mcsontos@redhat.com> - 2.03.02-3
changelog:
  - Fix handling of exported VGs lvmdbusd.
  - Restore missing man info lvcreate --zero for thin-pools.
  - Drop misleadning comment for metadata minimum_io_size for VDO segment.
  - Ensure migration_threshold for cache is at least 8 chunks.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.02-4
changelog:
  - Introduce LVM_SUPPRESS_SYSLOG to suppress syslog usage by generator.
  - Fix generator querying config options missing from lvm.conf.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.02-6
changelog:
  * Thu Feb 07 2019 Marian Csontos <mcsontos@redhat.com> - 2.03.02-5
  - Improve -lXXX%VG modifier which improves cache segment estimation.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.05-2
changelog:
  - Fix scanning of PVs with size not matching device.
  - Allow --stripe/--stripesize in mirror conversions.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.05-3
changelog:
  - Remove unsupported OPTIONS+="event_timeout" udev rule from 11-dm-lvm.rules.
  - Prevent creating VGs with PVs with different logical block sizes.
  - Fix metadata writes from corrupting with large physical block size.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.07-1
changelog:
  - Ensure minimum required region size on striped RaidLV creation.
  - Fix resize of thin-pool with data and metadata of different segtype.
  - Improve mirror type leg splitting.
  - Fix activation order when removing merged snapshot.
  - Experimental VDO support for lvmdbusd.
  - Correctly set read_ahead for LVs when pvmove is finished.
  - Add support for DM_DEVICE_GET_TARGET_VERSION into device_mapper.
  - Activate thin-pool layered volume as 'read-only' device.
  - Ignore crypto devices with UUID signature CRYPT-SUBDEV.
  - Synchronize with udev when dropping snapshot.
  - Add missing device synchronization point before removing pvmove node.
  - See WHATS_NEW for more.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.08-1
changelog:
  - VDO and writecache volume improvements.
  - Prohibit reshaping of stacked raid LVs to prevent corruption.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.09-1
changelog:
  - Fix support for lvconvert --repair of pools used by third party applications.
  - Fix formating of vdopool (vdo_slab_size_mb was smaller by 2 bits).
  - Fix busy loop in dmeventd.
  - Fix lvmlocks.service using incorrect option.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.11-1
changelog:
  - Fix pvck handling MDA at offset different from 4096.
  - Partial or degraded activation of writecache is not allowed.
  - Enhance error handling in fsadm and handle correct fsck result.
  - Dmeventd lvm plugin ignores higher reserved_stack lvm.conf values.
  - Support using BLKZEROOUT for clearing devices.
  - Fixed interrup handling.
  - Fix block cache when device has too many failing writes.
  - Fix block cache waiting for IO completion with failing disks.
  - Add configure --enable-editline support as an alternative to readline.
  - Enhance reporting and error handling when creating thin volumes.
  - Enable vgsplit for VDO volumes.
  - Lvextend of vdo pool volumes ensure at least 1 new VDO slab is added.
  - Restore lost signal blocking while VG lock is held.
  - Improve estimation of needed extents when creating thin-pool.
  - Use extra 1% when resizing thin-pool metadata LV with --use-policy.
  - Enhance --use-policy percentage rounding.
  - Allow pvmove of writecache origin.
  - Report integrity fields.
  - Integrity volumes defaults to journal mode.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.11-2
changelog:
  - Fix problem with wiping of converted LVs.
  - Fix memleak in scanning.
  - Fix corner case allocation for thin-pools.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.11-3
changelog:
  - Fix mpath filtering of NVMe devices.
  - Check if lvcreate passes read_only_volume_list with tags and skips zeroing.
  - Limit pool metadata spare to 16GiB.
  - Improves conversion and allocation of pool metadata.
  - Fix different limits used for metadata by lvm2 and thin-tools.
  - Fix interrupting lvconvert --splitcache command with striped origin volumes.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.12-3
changelog:
  - Allow extending thin-pool data with writecache on top.
  - Fix removing thin-pool data converted to writeache.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.12-4
changelog:
  - Fix conversion of writecache LVs to thin pool data volume.
  - Add deviceidtype option for lvmdevices.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.12-6
changelog:
  - Fix handling of pmspare by vgsplit, vgmerge and vgremove.
  - Fix detection of active components of external origin volume.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.14-7
changelog:
  - Fix lvm crash when recreating PV with UUID of a missing PV.
  - Fix lvconvert --type vdo-pool with --test should not write signature.
  - Use correect profile in lvmdbusd preventing messages in JSON output.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.14-8
changelog:
  - Fix [vdo_]use_compression options.
  - Fix vgimportdevices operating on incomplete VGs fails when nothing to import.
  - Fix message processing on thin-pool extension leaving devices behind.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.14-14
changelog:
  - Fix multisegment RAID1 allocator using one disk for both legs.
  - Fix lvconvert -m 0 taking rimage_0 even if it is out of sync.
  - Add warning message when mirror images have (r)efresh bit set.
  - Document lv_attr volume type bit (g) for raid+integrity in lvs(8).


author: Benjamin Marzinski <bmarzins@redhat.com> 0.7.8-3
changelog:
  - Add 0017-BZ-1648397-fix-mpp-hwe-handling-when-paths-are-freed.patch
    * Fix crash by deleting in use hardware entry list pointer
  - Add 0018-libmultipath-cleanup-pthread_cleanup_pop-call.patch
    * Fix compiler warning
  - Add 0019-libmultipath-fix-false-removes-in-dmevents-polling-c.patch
    * The above 3 patches have been accepted upstream
  - Resolves: bz #1648397


author: Benjamin Marzinski <bmarzins@redhat.com> 0.7.8-5
changelog:
  - Add 0021-BZ-1673167-Fix-miscounting-active-paths.patch
  - Add 0022-BZ-1673167-ignore-failed-wwid-recheck.patch
  - Resolves: bz #1673167


author: Benjamin Marzinski <bmarzins@redhat.com> 0.7.8-6
changelog:
  - Fix multipath_conf_syntax CI test
    * need to wait for udev to settle before removing multipath device
  - Resolves: bz #1673167


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-1
changelog:
  - Update Source to upstream version 0.8.0
    * Previous patches 0001-0006 & 0015-0019 are included in this commit
  - Rename files
    * Previous patches 0007-0014 are now 0018-0025
    * Previous patches 0020-0023 are now 0001, 0006 & 0007
  - Add 0002-libmultipath-handle-existing-paths-in-marginal_path-.patch
  - Add 0003-multipathd-cleanup-marginal-paths-checking-timers.patch
  - Add 0004-libmultipath-fix-marginal-paths-queueing-errors.patch
  - Add 0005-libmultipath-fix-marginal_paths-nr_active-check.patch
  - Add 0008-libmutipath-continue-to-use-old-state-on-PATH_PENDIN.patch
  - Add 0009-multipathd-use-update_path_groups-instead-of-reload_.patch
  - Add 0010-multipath.conf-add-missing-options-to-man-page.patch
  - Add 0011-libmultipath-add-get_uid-fallback-code-for-NVMe-devi.patch
  - Add 0012-libmulitpath-cleanup-uid_fallback-code.patch
  - Add 0013-multipathd-handle-changed-wwids-by-removal-and-addit.patch
    * Multipath will now automatically remove and re-add paths if
      their wwid changes
  - Add 0014-multipathd-remove-wwid_changed-path-attribute.patch
  - Add 0015-multipathd-ignore-disable_changed_wwids.patch
    * Since paths are now getting removed and re-added there is
      no need to disable them.
  - Add 0016-multipathd-Don-t-use-fallback-code-after-getting-wwi.patch
  - Add 0017-libmultipath-silence-dm_is_mpath-error-messages.patch
  - Add 0026-RH-Fix-nvme-compilation-warning.patch
  - Add 0027-Fix-systemd-version-detection.patch
    * The above 16 patches have been submitted upstream
  - Add 0028-RH-attempt-to-get-ANA-info-via-sysfs-first.patch
    * Red Hat has a sysfs method to access the ANA state, which isn't
      upstream, and will not be. This will probably go away in the
      future.
  - Resolves: bz #1498546


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-2
changelog:
  - Add 0029-BZ-1700451-check-on-multipathd-without-starting-it.patch
  - Add 0030-BZ-1700451-test-socket-connection-in-non-blocking-mo.patch
    * the "multipath -u" call in 62-multipath.rules should no longer hang
      on multipathd startup.
  - Resolves: bz #1700451


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-3
changelog:
  - Add 0031-libmultipath-handle-clock_gettime-failures-in-tur-ch.patch
  - Add 0032-kpartx-fail-if-dup-of-dasd-file-descriptor-fails.patch
  - Add 0033-multipathd-fix-REALLOC_REPLY-with-max-length-reply.patch
  - Add 0034-multipathd-handle-NULL-return-from-genhelp_handler.patch
    * The above 4 patches have been submitted upstream
  - Related: bz #1498546


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.0-4
changelog:
  - Add 0035-BZ-1700911-hwtable-add-Lenovo-DE-series.patch
  - Add 0036-libmultipath-make-vector_foreach_slot_backwards-work.patch
    * Fix for bz #1713459
  - Fixes for bz #1666322 and #1669097 were included in 0.8.0 upstream
    code
  - Resolves: bz #1666322, #1669097, #1700911, #1713459


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.3-1
changelog:
  - Update Source to upstream version 0.8.3
    * This version includes the fixes for bz #1690515, #1703439,
        * Previous patches 0001-0017 & 0031-0036 are included in this version
  - Rename files
    * Previous patches 0018-0026 & 0028 are now 0004-0013
    * 0008-RH-add-mpathconf.patch has been modified to add a
      --property_blacklist option to fix bz #1753729
  - Add 0001-multipathd-warn-when-configuration-has-been-changed.patch
    * Multipath now logs a warning message when the configuration file
      has been changed to fix bz #1750594
  - Add 0002-libmultipath-fix-leak-in-foreign-code.patch
  - Add 0003-Fix-leak-in-mpathpersist.patch
    * The above 3 patches have been submitted upstream
  - Resolves: bz #1690515, #1703439, #1719562, #1747534, #1750594, #1753729


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.3-3
changelog:
  - Rename files
    * Previous patches 0004-0013 are now 0010-0019
    * 0014-RH-add-mpathconf.patch now makes mpathconf default to not
      printing foreign devices (bz #1760709)
  - Add 0004-libmultipath-remove-unused-path-prio_args.patch
  - Add 0005-libmultipath-constify-get_unaligned_be.patch
  - Add 0006-libmultipath-add-missing-hwe-mpe-variable-merges.patch
  - Add 0007-libmultipath-fix-sgio_get_vpd-looping.patch
  - Add 0008-libmultipath-add-vend_id-to-get_vpd_sgio.patch
  - Add 0009-libmultipath-add-code-to-get-vendor-specific-vpd-dat.patch
    * Add the '%g' maps and paths format wildcard, and the vpd_vendor
      multipath.conf devices section parameter. (bz #1527212)
  - Resolves: bz #1527212, #1760709


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.3-3.1
changelog:
  - Add 0020-libmultipath-make-dm_get_map-status-return-codes-sym.patch
  - Add 0021-multipathd-fix-check_path-errors-with-removed-map.patch
    * The above 2 patches fix bz #1856944. multipathd handles external
      device removal better.
  - Resolves: bz #1856944


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.3-3.3
changelog:
  - Add 0022-libmultipath-fix-files-read-from-config_dir.patch
    * Fix for bz #1858993. Only read files ending in .conf
  - Resolves: bz #1858993


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-1
changelog:
  - Update Source to upstream version 0.8.4
    * This version includes the fixes for bz #1768894 & #1821214
    * Previous patches 0001-0009 are included in this version
  - Rename files
    * Previous patches 0010-0019 are now 0011-0020
  - Add 0001-libmultipath-assign-variable-to-make-gcc-happy.patch
  - Add 0002-libmutipath-don-t-close-fd-on-dm_lib_release.patch
  - Add 0003-libmultipath-allow-force-reload-with-no-active-paths.patch
    * make multipath and multipathd reload maps with no active paths
      (bz #1814858)
  - Add 0004-libmpathpersist-depend-on-libmultipath.patch
  - Add 0005-multipath-tools-Makefile-more-dependency-fixes-for-p.patch
  - Add 0006-multipath-tools-Makefile.inc-set-Wno-error-clobbered.patch
  - Add 0007-libmultipath-discovery.c-use-z-qualifier-for-size_t.patch
  - Add 0008-libmultipath-eliminate-more-signed-unsigned-comparis.patch
  - Add 0009-libmultipath-set_uint-fix-parsing-for-32bit.patch
  - Add 0010-multipath-tools-Makefile-add-install-dependency.patch
    * The above 10 patches have been submitted upstream
  - Resolves: bz #1768894, #1814858, #1821214


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-2
changelog:
  - Add 0021-libmultipath-remove-_blacklist_exceptions-functions.patch
  - Add 0022-libmultipath-fix-parser-issue-with-comments-in-strin.patch
  - Add 0023-libmultipath-invert-regexes-that-start-with-exclamat.patch
    * This commit also changes the default devnode blacklist to
      blacklist all devices except scsi, dasd, and nvme.
  - Resolves: bz #1828180


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-3
changelog:
  - Add 0024-libmultipath-make-dm_get_map-status-return-codes-sym.patch
  - Add 0025-multipathd-fix-check_path-errors-with-removed-map.patch
  - Add 0026-libmultipath-make-dm_flush_maps-only-return-0-on-suc.patch
  - Add 0027-multipathd-add-del-maps-multipathd-command.patch
  - Add 0028-multipath-make-flushing-maps-work-like-other-command.patch
  - Add 0029-multipath-delegate-flushing-maps-to-multipathd.patch
  - Add 0030-multipath-add-option-to-skip-multipathd-delegation.patch
    * The above 7 patches fix bz #1845875. Multipath now attempts to
      delegate device removal to multipathd, and multipathd handles
      external device removal better.
  - Add 0031-libmultipath-fix-sysfs-dev_loss_tmo-parsing.patch
    * Fixes bz #1852843
  - Add 0032-kpartx-read-devices-with-direct-IO.patch
    * Fixes bz #1814858
  - Add 0033-kpartx-handle-alternate-bsd-disklabel-location.patch
  - Add 0034-libmultipath-fix-checker-detection-for-nvme-devices.patch
    * fixes bz #1845915
  - Add 0035-Makefile.inc-trim-extra-information-from-systemd-ver.patch
  - Add 0036-kpartx-fix-Wsign-compare-error.patch
  - Resolves: bz #1814858, #1845875, #1845915, #1852843


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-4
changelog:
  - Add 0037-libmultipath-count-pending-paths-as-active-on-loads.patch
    * make udev treat the device as having paths, so it will run kpartx
    * Fixes bz #1846866
  - Resolves: bz #1846866


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-5
changelog:
  - Add 0038-multipath-deal-with-failures-flushing-maps.patch
    * Don't print "fail" if multipath needs to failback to removing
      a device itself.
    * Fixes bz #1845875
  - Modify multipath_conf_syntax CI test
    * It started failing because "multpath -F" can now start multipathd
      via the socket, and the test expected multipathd to not be running
  - Resolves: bz #1845875


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-6
changelog:
  - Add 0039-libmultipath-factor-out-code-to-get-vpd-page-data.patch
  - Add 0040-libmultipath-limit-reading-0xc9-vpd-page.patch
    * Only check for rdac support on configured devices, or devices where
      vpd page 0x00 indicates support for vpd page 0xc9
    * Fixes bz #1877415
  - Add 0041-libmultipath-add-device-to-hwtable.c.patch
    * Add support for Fujitsu Eternus AB/HB
    * Fixes bz #1857429
  - Add 0042-libmultipath-move-fast_io_fail-defines-to-structs.h.patch
  - Add 0043-libmultipath-add-eh_deadline-multipath.conf-paramete.patch
    * Fixes bz #1819897
  - Add 0044-libmultipath-don-t-dlclose-tur-checker-DSO.patch
    * Fixes bz #1875384
  - Add 0045-libmultipath-warn-about-missing-braces-at-end-of-mul.patch
    * Fixes bz #1897530
  - Add 0046-libmultipath-ignore-multipaths-sections-without-wwid.patch
    * Fixes bz #1897815
  - Add 0047-tests-fix-missing-priority-blacklist-test.patch
  - Add 0048-mpathpersist-Fix-Register-and-Ignore-with-0x00-SARK.patch
    * Make mpathpersist Register and Ignore command clear the registration
      with a 0x0 SARK, like sg_persist does.
    * Fixes bz #1894103
  - Add 0049-mpathpersist-update-prkeys-file-on-changing-registra.patch
    * Fixes bz #1900522
    * The above 11 patches have all been submitted upstream
  - Resolves: bz #1819897, #1857429, #1875384, #1877415, #1894103, #1897530
  - Resolves: bz #1897815, #1900522


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-6
changelog:
  - Add 0050-multipathd-Fix-multipathd-stopping-on-shutdown.patch
    * Fixes bz #1892496
  - Add 0051-multipath.conf.5-Improve-checker_timeout-description.patch
    * Fixes bz #1906073
  - Resolves: bz #1892496, #1906073


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-7
changelog:
  - Add 0052-libmultipath-check-for-null-wwid-before-strcmp.patch
    * Missing part of fix for bz #1897815
  - Add 0053-libmultipath-make-find_err_path_by_dev-static.patch
  - Add 0054-multipathd-avoid-io_err_stat-crash-during-shutdown.patch
  - Add 0055-multipathd-avoid-io_err_stat-ABBA-deadlock.patch
  - Add 0056-multipathd-use-get_monotonic_time-in-io_err_stat-cod.patch
  - Add 0057-multipathd-combine-free_io_err_stat_path-and-destroy.patch
  - Add 0058-multipathd-cleanup-logging-for-marginal-paths.patch
    * The above 6 patches fix bz #1920795
  - Add 0059-libmpathpersist-fix-thread-safety-of-default-functio.patch
    * Fixes bz #1913549
  - Resolves: bz #1897815, #1913549, #1920795


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-9
changelog:
  - Add 0060-kpartx-free-loop-device-after-listing-partitions.patch
    * Fixes bz #1925490
  - Add 0061-RH-fix-find_multipaths-in-mpathconf.patch
    * Fixes bz #1921651
  - Resolves: bz #1921651, #1925490


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-10
changelog:
  - Add 0062-libmultipath-select_action-don-t-drop-map-if-alias-c.patch
    * Fall back to WWID names instead of removing existing device
  - Add 0063-libmultipath-check-if-user_friendly_name-is-in-use.patch
    * make sure to choose a user_friendly_name that isn't in use
    * Fixes bz #1923777
  - Add alias_clash CI test
  - Resolves: bz #1923777


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-11
changelog:
  - Add 0062-libmultipath-select_action-don-t-drop-map-if-alias-c.patch
    * Fall back to WWID names instead of removing existing device
  - Add 0063-libmultipath-check-if-user_friendly_name-is-in-use.patch
    * make sure to choose a user_friendly_name that isn't in use
    * Fixes bz #1937832
  - Add alias_clash CI test
  - Remove unused multipath.conf
  - Resolves: bz #1937832


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-12
changelog:
  - Add 0064-libmultipath-check-udev_device_get_-return-value-to-.patch
    * Fixes bz #1946940
  - Resolves: bz #1946940


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-13
changelog:
  - Add 0065-libmultipath-cleanup-code-to-strip-wwid-trailing-spa.patch
  - Add 0066-multipathd-add-recheck_wwid-option-to-verify-the-pat.patch
  - Add 0067-libmultipath-avoid-infinite-loop-with-bad-vpd-page-8.patch
  - Add 0068-libmultipath-fix-priorities-in-parse_vpd_pg83.patch
  - Add 0069-RH-make-parse_vpd_pg83-match-scsi_id-output.patch
  - Add 0070-multipathd-improve-getting-parent-udevice-in-rescan_.patch
  - Add 0071-multipathd-don-t-trigger-uevent-for-partitions-on-ww.patch
    * add recheck_wwid option
    * Fixes bz #1907904
  - Resolves: bz #1907904


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-17
changelog:
  - Add 0074-mpathpersist-fail-commands-when-no-usable-paths-exis.patch
    * Fixes bz #1984723
  - Add 0075-multipath-print-warning-if-multipathd-is-not-running.patch
    * Fixes bz #1973592
  - Add 0076-multipathd-don-t-access-path-if-it-was-deleted.patch
    * Found by coverity
  - Resolves: bz #1973592, #1984723


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-18
changelog:
  - Add 0077-multipathd.socket-add-missing-conditions-from-servic.patch
    * Fixes bz #2008101
  - Add 0078-libmulitpath-add-section-name-to-invalid-keyword-out.patch
    * Fixes bz #1918150
  - Resolves: bz #1918150, #2008101


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-20
changelog:
  - Add 0079-libmultipath-use-typedef-for-keyword-handler-and-pri.patch
  - Add 0080-libmultipath-print-the-correct-file-when-parsing-fai.patch
  - Add 0081-libmultipath-pass-file-and-line-number-to-keyword-ha.patch
  - Add 0082-libmultipath-make-set_int-take-a-range-for-valid-val.patch
  - Add 0083-libmultipath-improve-checks-for-set_str.patch
  - Add 0084-libmultipath-split-set_int-to-enable-reuse.patch
  - Add 0085-libmultipath-cleanup-invalid-config-handling.patch
  - Add 0086-libmultipath-don-t-return-error-on-invalid-values.patch
    * Above 8 patches fix bz #1900595
  - Add 0087-multipathd-avoid-unnecessary-path-read-only-reloads.patch
    * Fixes bz #2009624
  - Resolves: bz #1900595, #2009624, #2021823


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-21
changelog:
  - Add 0088-libmultipath-make-helper-function-to-trigger-path-ue.patch
  - Add 0089-multipathd-trigger-udev-change-on-path-addition.patch
  - Resolves: bz #1862032


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-23
changelog:
  - Add 0091-multipath-tools-add-HPE-MSA-1060-2060-to-hwtable.patch
    * Partial fix for bz #2058222
  - Add 0092-multipath-tools-update-mpp-force_readonly-in-ev_add_.patch
    * Fixes bz #2065468
  - Add 0093-updated-HPE-MSA-builtin-config.patch
    * Fixes bz #2058222
  - Resolves bz #2065468, #2058222


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-24
changelog:
  - Add 0094-multipath-return-failure-on-an-invalid-remove-comman.patch
    * Fixes bz #2052054
  - Add 0095-libmultipath-steal-the-src-string-pointer-in-merge_s.patch
  - Add 0096-libmultipath-enable-linear-ordering-of-bus-proto-tup.patch
  - Add 0097-libmultipath-use-bus_protocol_id-in-snprint_path_pro.patch
  - Add 0098-libmultipath-make-protocol_name-global.patch
  - Add 0099-libmultipath-add-a-protocol-subsection-to-multipath..patch
  - Add 0100-libmultipath-Set-the-scsi-timeout-parameters-by-path.patch
  - Add 0101-libmultipath-check-the-overrides-pctable-for-path-va.patch
  - Add 0102-libmultipath-fix-eh_deadline-documentation.patch
  - Add 0103-libmultipath-Add-documentation-for-the-protocol-subs.patch
  - Add 0104-libmultipath-use-symbolic-value-for-invalid-pcentry.patch
    * The above 10 patches implement feature from bz #2065477
  - Resolves: bz #2052054, #2065477


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-25
changelog:
  - Add 0105-multipathd-handle-fpin-events.patch
  - Add 0106-multipathd-disallow-changing-to-from-fpin-marginal-p.patch
  - Resolves: bz #2083077


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-27
changelog:
  - Add 0108-multipathd-Add-missing-ctype-include.patch
  - Add 0109-multipathd-replace-libreadline-with-libedit.patch
    * replace readline with libedit, to avoid license conflicts
  - Resolves: bz #2119887


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-30
changelog:
  - Add 0111-multipathd-factor-out-the-code-to-flush-a-map-with-n.patch
  - Add 0112-libmultipath-return-success-if-we-raced-to-remove-a-.patch
  - Add 0113-multipathd-Handle-losing-all-path-in-update_map.patch
  - Resolves: bz #2110485


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-31
changelog:
  - Add 0114-multipathd-ignore-duplicated-multipathd-command-keys.patch
    * Fixes bz #2133996
  - Add 0115-multipath-tools-use-run-instead-of-dev-shm.patch
    * Fixes bz #2133990
  - Resolves: bz #2133990, #2133996


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-32
changelog:
  - Add 0116-kpartx-hold-device-open-until-partitions-have-been-c.patch
    * Fixes bz #2128885
  - Add 0117-libmultipath-cleanup-remove_feature.patch
  - Add 0118-libmultipath-cleanup-add_feature.patch
  - Add 0119-multipath-tests-tests-for-adding-and-removing-featur.patch
  - Add 0120-libmultipath-fix-queue_mode-feature-handling.patch
  - Add 0121-multipath-tests-tests-for-reconcile_features_with_qu.patch
  - Add 0122-libmultipath-prepare-proto_id-for-use-by-non-scsi-de.patch
  - Add 0123-libmultipath-get-nvme-path-transport-protocol.patch
  - Add 0124-libmultipath-enforce-queue_mode-bio-for-nmve-tcp-pat.patch
    * Fixes bz #2022359
  - Resolves: bz #2022359, #2128885


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-33
changelog:
  - Add 0125-multipath-add-historical-service-time-to-the-man-pag.patch
    * Fixes bz #2141996
  - Modify tests/multipath_conf_syntax/main.sh
    * fix unrelated test error
  - Resolves: bz #2141996


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-34
changelog:
  - Add 0126-libmultipath-copy-mpp-hwe-from-pp-hwe.patch
    * Fixes bz #2126714
  - Cleanup multiple CI tests
  - Resolves: bz #2126714


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-35
changelog:
  - Add 0127-libmultipath-don-t-leak-memory-on-invalid-strings.patch
  - Add 0128-libmutipath-validate-the-argument-count-of-config-st.patch
  - Resolves: bz #2155560


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-36
changelog:
  - Add 0129-libmultipath-select-resize-action-even-if-reload-is-.patch
  - Add 0130-libmultipath-cleanup-ACT_CREATE-code-in-select_actio.patch
  - Add 0131-libmultipath-keep-renames-from-stopping-other-multip.patch
  - Resolves: bz #2166468


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-37
changelog:
  - Fix bugzilla linked to the changes (was previously linked to
    the wrong bug, 2162537)
  - Resolves: bz #2166468


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-38
changelog:
  - Add 0132-multipathd-make-pr-registration-consistent.patch
  - Add 0133-libmultipath-make-prflag-an-enum.patch
  - Add 0134-multipathd-handle-no-active-paths-in-update_map_pr.patch
  - Add 0135-libmpathpersist-fix-resource-leak-in-update_map_pr.patch
  - Resolves: bz #2164871


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-39
changelog:
  - Add OSCI tests directory
  - Make kpartx_id installation location relative to /usr/lib/udev/rules.d
  - Resolves: bz #2164871


author: Benjamin Marzinski <bmarzins@redhat.com> 0.8.4-40
changelog:
  - Add 0136-multipathd-Added-support-to-handle-FPIN-Li-events-fo.patch
    * Add support in multipathd for NVMe to listen for FPIN-Li events and
      mark effected paths as marginal
  - Resolves: RHEL-6677


author: Marian Csontos <mcsontos@redhat.com> - 0.7.2-1
changelog:
  - Update to latest upstream release including various bug fixes and new features.
  - Fix segfault when dump tools are given a tiny metadata file.
  - Fix -V exiting with 1.
  - Fix thin_check when running on XML dump instead of binary data.
  - Speed up free block searching.


author: Marian Csontos <mcsontos@redhat.com> - 0.7.3-1
changelog:
  - Update to latest bugfix and documentation update release.
  - *_restore tools wipe superblock as a last resort.
  - Add thin_check --override-mapping-root.


author: Marian Csontos <mcsontos@redhat.com> - 0.8.5-3
changelog:
  - Remove obsolete pool-inactive option from thin_trim man page.
  - Check input file exists eralier, and prevent writing incorrect metadata.


author: Marian Csontos <mcsontos@redhat.com> - 0.9.0-1
changelog:
  - Update to upstream version 0.9.0.
  - Fix important issues found by static analysis.
  - Update crc32c to version 0.5 supporting non x86 architectures.
  - New tools thin_metadata_pack and thin_metadata_unpack.


author: Pavel Zhukov <pzhukov@redhat.com> - 12:4.3.6-33
changelog:
  - Resolves: #1673946 - Change default prefix length to 128
  - Add address-prefix-lenght option to change default value
  - Fix backporting issues


author: Lianbo Jiang <lijiang@redhat.com> - 1:3.2-6
changelog:
  - Updated to the latest upstream(5b3c8e995026 ("Allow overriding
    build settings from the environment"))
  - Resolves: rhbz#1796581


author: Ales Matej <amatej@redhat.com> - 4.2.11-1
changelog:
  - Update to 4.2.11
  - Improve modularity documentation (RhBug:1730162,1730162,1730807,1734081)
  - Fix detection whether system is running on battery (used by metadata caching timer) (RhBug:1498680)
  - New repoquery queryformat: %{reason}
  - Print rpm errors during test transaction (RhBug:1730348) 
  - Fix incorrectly marked profile and stream after failed rpm transaction check (RhBug:1719679)
  - Show transaction errors inside dnf shell (RhBug:1743644)
  - dnf-automatic now respects versionlock excludes (RhBug:1746562)
  - [doc] Add user_agent and countme options
  - [history] Don't store failed transactions as succeeded
  - [history] Do not require root for informative commands
  - [dnssec] Fix UnicodeWarning when using new rpm (RhBug:1699650)
  - Apply excludes before modular excludes (RhBug:1709453)
  - Improve help for command line arguments (RhBug:1659328)
  - Add new modular API method ModuleBase.get_modules
  - Mark features used by ansible, anaconda and subscription-manager as an API


author: Ales Matej <amatej@redhat.com> - 4.2.16-1
changelog:
  - Update to 4.2.16
  - Fix downloading local packages into destdir (RhBug:1727137)
  - Report skipped packages with identical nevra only once (RhBug:1643109)
  - Restore functionality of dnf remove --duplicates (RhBug:1674296)
  - Improve API documentation
  - Document NEVRA parsing in the man page
  - Do not wrap output when no terminal (RhBug:1577889)
  - Allow to ship alternative dnf.conf (RhBug:1752249)
  - Don't check if repo is expired if it doesn't have loaded metadata (RhBug:1745170)
  - Remove duplicate entries from "dnf search" output (RhBug:1742926)
  - Set default value of repo name attribute to repo id (RhBug:1669711)
  - Allow searching in disabled modules using "dnf module provides" (RhBug:1629667)
  - Group install takes obsoletes into account (RhBug:1761137)
  - Improve handling of vars
  - Do not load metadata for repolist commands (RhBug:1697472,1713055,1728894)
  - Fix messages for starting and failing scriptlets (RhBug:1724779)
  - Don't show older install-only pkgs updates in updateinfo (RhBug:1649383,1728004)
  - Add --ids option to the group command (RhBug:1706382)
  - Add --with_cve and --with_bz options to the updateinfo command (RhBug:1750528)


author: Ales Matej <amatej@redhat.com> - 4.2.17-2
changelog:
  - Update to 4.2.17
  - Enable versionlock for check-update command (RhBug:1750620)
  - Add error message when no active modules matched (RhBug:1696204)
  - Log mirror failures as warning when repo load fails (RhBug:1713627)
  - dnf-automatic: Change all systemd timers to a fixed time of day (RhBug:1754609)
  - DNF can use config from the remote location (RhBug:1721091)
  - [doc] update reference to plugin documentation (RhBug:1706386)
  - [yum compatibility] Report all packages in repoinfo
  - [doc] Add definition of active/inactive module stream
  - repoquery: Add a switch to disable modular excludes
  - Report more informative messages when no match for argument (RhBug:1709563)
  - [doc] Add description of excludes in dnf
  - Report more descriptive message when removed package is excluded
  - Add module repoquery command
  - Fix assumptions about ARMv8 and the way the rpm features work (RhBug:1691430)
  - Add Requires information into module info commands
  - Enhance inheritance of transaction reasons (RhBug:1672618,1769788)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.2.17-3
changelog:
  - Do a substitution of variables in repo_id (RhBug:1748841)
  - Respect order of config files in aliases.d (RhBug:1680489)
  - [doc] Remove note about user-agent whitelist (RhBug:1777255)
  - Fix detection of the latest module (RhBug:1781769)


author: Ales Matej <amatej@redhat.com> - 4.2.17-4
changelog:
  - Fix alias processing with '\' escaping (RhBug:1680482)
  - [doc] Explain the backslash notation also near the example (RhBug:1680482)
  - Better descriptions for infinite aliases recursion (RhBug:1680488)
  - Improve help for 'dnf module' command (RhBug:1758447)
  - Unify downgrade exit codes with upgrade (RhBug:1759847)
  - Honor priority with check-update (RhBug:1769466)
  - Add shell restriction with local packages (RhBug:1773483)
  - Restore functionality of remove --oldinstallonly (RhBug:1774670)


author: Ales Matej <amatej@redhat.com> - 4.2.17-6
changelog:
  - Sort packages in transaction output by nevra (RhBug:1773436)
  - Add support of commandline packages by repoquery (RhBug:1784148)
  - [doc] Document that the include option was removed (RhBug:1786072)
  - New API function for setting loggers (RhBug:1788212)


author: Ales Matej <amatej@redhat.com> - 4.2.21-1
changelog:
  - Update to 4.2.21
  - Running with tsflags=test doesn't update log files
  - Allow disabling individual aliases config files (RhBug:1680566)
  - List arguments: only first empty value is used (RhBug:1788154)
  - Report missing profiles or default as broken module (RhBug:1790967)
  - Format history table to use actual terminal width (RhBug:1786316)
  - Handle custom exceptions from libdnf
  - Fix _skipped_packages to return only skipped (RhBug:1774617)
  - Add setter for tsi.reason
  - Add new hook for commands: Run_resolved
  - Clean also .yaml repository metadata
  - Use WantedBy=timers.target for all dnf timers (RhBug:1798475)
  - Fix completion helper if solv files not in roon cache (RhBug:1714376)
  - Add bash completion for 'dnf module' (RhBug:1565614)
  - Check command no longer reports  missing %pre and %post deps (RhBug:1543449)
  - Check if arguments can be encoded in 'utf-8'
  - Fix crash with "dnf -d 6 repolist" (RhBug:1812682)
  - Do not print the first empty line for repoinfo
  - Redirect logger and repo download progress when --verbose
  - Respect repo priority when listing packages (RhBug:1800342)
  - Remove misleading green color from the "broken dependencies" lines (RhBug:1814192)
  - [repoquery] Fix rich deps matching by using provide expansion from libdnf (RhBug:1534123)
  - [repoquery] Do not protect running kernel for --unsafisfied (RhBug:1750745)
  - [doc] Document the retries config option only works for packages (RhBug:1783041)
  - [doc] repoquery --what* with  multiple arguments (RhBug:1790262)
  - [doc] Remove incorrect information about includepkgs (RhBug:1813460)
  - [doc] Document that list and info commands respect repo priority
  - [doc] Document color options


author: Nicola Sella <nsella@redhat.com> - 4.2.23-1
changelog:
  - Update to 4.2.23
  - Fix behavior of `install-n` command
  - Fix behavior of `localinstall` command
  - Fix behavior of `autoremove-n` command
  - Fix behavior of `remove-n` command
  - Fix behavior of `repoquery-n` command
  - Fix behavior of `list-updateinfo` and related aliases
  - Refactor code in `repoinfo` to use opts.command correctly.
  - Add myself to list of contributors
  - Add updated to verbose output of updateinfo list (RhBug: 1801092)
  - Fix a couple of missed grammatical errors in updateinfo docs.
  - Add comment option (RhBug:1773679)
  - Better wording of dnssec email parsing error.
  - Print nicer DnssecErrors (RhBug:1813244)
  - Add new API for handling gpg signatures (RhBug:1339617)
  - Verify GPG signatures (RhBug:1793298)
  - Fix a syntax typo
  - Fix up Conflicts: on python-dnf-plugins-extras so it actually works
  - [doc] Move yum-plugin-post-transaction-actions to dnf-plugins-core
  - Remove args "--set-enabled", "--set-disabled" from DNF (RhBug:1727882)
  -  Search command is now alphabetical (RhBug:1811802)
  - Fix downloading packages with full URL as their location
  - repo: catch libdnf.error.Error in addition to RuntimeError in load() (RhBug:1788182)
  - History tbl to max size when redirect to file (RhBug:1786335,1786316)


author: Nicola Sella <nsella@redhat.com> - 4.2.23-3
changelog:
  - Add logfilelevel configuration (RhBug:1802074)
  - [doc] Enhance repo variables documentation (RhBug:1848161,1848615)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.2.6-1
changelog:
  - Update to 4.2.6
  - Use improved config parser that preserves order of data
  - Follow RPM security policy for package verification
  - Update modules regardless of installed profiles
  - [conf] Use environment variables prefixed with DNF_VAR_
  - Allow adjustment of repo from --repofrompath (RhBug:1689591)
  - Allow globs in setopt in repoid part
  - Add command abbreviations (RhBug:1634232)
  - Installroot now requires absolute path
  - librepo: Turn on debug logging only if debuglevel is greater than 2 (RhBug:1355764,1580022)
  - Document cachedir option (RhBug:1691365)
  - Enhance documentation - API examples
  - Enhance documentation of --whatdepends option (RhBug:1687070)
  - Update documentation: implemented plugins; options; deprecated commands (RhBug:1670835,1673278)
  - [doc] Add info of relation update_cache with fill_sack (RhBug:1658694)
  - Rename man page from dnf.automatic to dnf-automatic to match command name
  - Fix alias list command (RhBug:1666325)
  - Fix behavior  of ``--bz`` option when specifying more values
  - Add protection of yum package (RhBug:1639363)
  - Fix ``list --showduplicates`` (RhBug:1655605)
  - Retain order of headers in search results (RhBug:1613860)
  - Solve traceback with the "dnf install @module" (RhBug:1688823)
  - Fix multilib obsoletes (RhBug:1672947)
  - Do not remove group package if other packages depend on it
  - Remove duplicates from "dnf list" and "dnf info" outputs
  - Fix the installation of completion_helper.py
  - Fix formatting of message about free space required
  - Fix installation failiure when duplicit RPMs are specified (RhBug:1687286)
  - Fix issues with terminal hangs when attempting bash completion (RhBug:1702854)
  - Allow plugins to terminate dnf (RhBug:1701807)
  - [provides] Enhanced detecting of file provides (RhBug:1702621)
  - [provides] Sort the output packages alphabetically


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.2.7-1
changelog:
  - Update to 4.2.7
  - Fix package reinstalls during yum module remove (RhBug:1700529)
  - Fail when "-c" option is given nonexistent file (RhBug:1512457)
  - Reuse empty lock file instead of stopping dnf (RhBug:1581824)
  - Propagate comps 'default' value correctly (RhBug:1674562)
  - Better search of provides in /(s)bin/ (RhBug:1657993)
  - Add detection for armv7hcnl (RhBug:1691430)
  - Fix group install/upgrade when group is not available (RhBug:1707624)
  - Report not matching plugins when using --enableplugin/--disableplugin
    (RhBug:1673289) (RhBug:1467304)
  - Add support of modular FailSafe (RhBug:1623128)
  - Replace logrotate with build-in log rotation for dnf.log and dnf.rpm.log
    (RhBug:1702690)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.2.7-3
changelog:
  - Update localizations from zanata (RhBug:1689982)
  - Accept multiple specs in repoquery options (RhBug:1667898,1656801)
  - Prevent switching modules in all cases (RhBug:1706215)
  - Change synchronization of rpm transaction to swdb (RhBug:1737328)
  - Print rpm error messages during transaction (RhBug:1677199)
  - Report missing default profile as an error (RhBug:1669527,1724564)
  - Describe a behavior when plugin is removed (RhBug:1700741)


author: Nicola Sella <nsella@redhat.com> - 4.4.2-3
changelog:
  - Backport patches
  - Log scriptlets output also for API users (RhBug:1847340)
  - Post transaction summary is logged for API users (RhBug:1855158)


author: Nicola Sella <nsella@redhat.com> - 4.4.2-4
changelog:
  - `dnf history` operations that work with comps correctly
  - Remove sourcepackages from install/upgrade set
  - Fix documentation of globs not supporting curly brackets


author: Nicola Sella <nsella@redhat.com> - 4.4.2-7
changelog:
  - Make log rotated permissions match initial log permissions (RhBug:1894344)
  - Add new attribute for Package - from_repo
  - Change behaviour of Package().from_repo
  - Package: add a get_header() method


author: Nicola Sella <nsella@redhat.com> - 4.4.2-8
changelog:
  - Add api function: fill_sack_from_repos_in_cache (RhBug:1865803)
  - Add tests and docs for fill_sack_from_repos_in_cache (RhBug:1865803)
  - Run tests for fill_sack_from_repos_in_cache in installroot


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.7.0-4
changelog:
  - Add fail_fast parameter to _download_remote_payloads() method
  - Throw CompsError when a group or environment is not found for the install methods
  - Respect cacheonly in python dnf API (RhBug:1862970)
  - [doc] Improve description of multilib_policy=all (RhBug:1996681,1995630)
  - [doc] Document default colors


author: Lukas Hrazky <lhrazky@redhat.com> - 4.7.0-8
changelog:
  - Add documentation for query api flags
  - Fix processing of download errors
  - Fix history undo on a Reason Change
  - Fix remove when no repos are enabled
  - Improve "proxy" configuration option documentation


author: Richard W.M. Jones <rjones@redhat.com> - 4.7.0-10
changelog:
  - Backport fix for leaks of libsolv's page file descriptors in Base object
    resolves: rhbz#2087734
  - Include instructions for regenerating patches.


author: Lukas Hrazky <lhrazky@redhat.com> - 4.7.0-11
changelog:
  - [doc] Describe how gpg keys are stored for `repo_ggpcheck`
  - Add only relevant pkgs to upgrade transaction (RhBug:2097757)


author: Lukas Hrazky <lhrazky@redhat.com> - 4.7.0-12
changelog:
  - Allow passing plugin parameters with dashes in names (RhBug:1980712)
  - Fix upgrade from file to noarch pkg (RhBug:2006018)
  - Add support for group upgrade rollback (RhBug:2016070)
  - Expose plugin unload method to API (RhBug:2047251)
  - Add doc related to --destdir and --downloadonly options (RhBug:2100811)
  - Set default value for variable to prevent crash (RhBug:2091636)
  - Don't include resolved advisories for obsoletes with sec. filters (RhBug:2101421)


author: Nicola Sella <nsella@redhat.com> - 4.7.0-13
changelog:
  - Add support for rollback of group upgrade rollback (RhBug:2016070)
  - Move system-upgrade plugin to core (RhBug:2054235)
  - Fix plugins unit tests + unload plugins upon their deletion (RhBug:2134309)


author: Nicola Sella <nsella@redhat.com> - 4.7.0-15
changelog:
  - Ignore processing variable files with unsupported encoding (RhBug:2141215)
  - Better explain traceback of rpm.error with dnf


author: Jaroslav Rohel <jrohel@redhat.com> - 4.7.0-17
changelog:
  - Omit src RPMs from check-update (RhBug:2151910,2203069)
  - automatic: Fix online detection with proxy (RhBug:2022440,2189851)


author: Jaroslav Rohel <jrohel@redhat.com> - 4.7.0-20
changelog:
  - Remove /usr/bin from sys.path to avoid accidentally importing garbage (RHEL-1245)
  - Fix japanese translations (RHEL-6393)
  - Fix substitution in kay-value-pair list in add_new_repo (RHEL-11786)


author: Marek Blaha <mblaha@redhat.com> - 4.7.0-21
changelog:
  - automatic: catch OSError, not SMTPException on smtp errors (RHEL-71545)
  - automatic: Check availability of config file (RHEL-71545)


author: Maito Yokoyama <maito.yokoyama@asianux.com> - 4.7.0-21.el8_10.ML.1
changelog:
  - Change the bugtracker URL to Asianux URL (Patch1000)
  - Add High to sec-severity (Patch1001)
  - Fix po file because add a High sec-severity (Patch1002)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.7.0-1
changelog:
  - Update to 4.7.0
  - New optional parameter for filter_modules enables following modular obsoletes based on a config option module_obsoletes
  - Fix module remove --all when no match spec (RhBug:1904490)
  - Make an error message more informative (RhBug:1814831)
  - Expand history to full term size when output is redirected (RhBug:1852577) (RhBug:1852577,1906970)
  - Print additional information when verifying GPG key using DNS
  - Enhanced detection of plugins removed in transaction (RhBug:1929163)
  - Improve repo config path ordering to fix a comps merging issue (RhBug:1928181)
  - Keep reason when package is removed (RhBug:1921063)
  - Improve mechanism for application of security filters (RhBug:1918475)
  - [API] Add new method for reset of security filters
  - Remove hardcoded logfile permissions (RhBug:1910084)
  - Preserve file mode during log rotation (RhBug:1910084)
  - Increase loglevel in case of invalid config options
  - Prevent traceback (catch ValueError) if pkg is from cmdline
  - Check for specific key string when verifing signatures (RhBug:1915990)
  - Use rpmkeys binary to verify package signature (RhBug:1915990)
  - [doc] Improve description of modular filtering
  - [doc] deprecated alias for dnf repoquery --deplist <deplist_option-label>
  - [doc] Describe install with just a name and obsoletes (RhBug:1902279)
  - [doc] Fix: "sslcacert" contains path to the file
  - [doc] Added proxy ssl configuration options, increase libdnf require
  - [doc] Update documentation for module_obsoletes and module_stream_switch
  - [doc] Improve documentation for Hotfix repositories
  - [doc] fix: "makecache" command downloads only enabled repositories
  - [doc] Add info that maximum parallel downloads is 20
  - [doc] installonly_limit documentation follows behavior
  - [doc] Add documentation for config option sslverifystatus (RhBug:1814383)
  - The noroot plugin no longer exists, remove mention


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.7-1
changelog:
  - Update to 4.0.7
  - Use improved config parser that preserves order of data
  - Fix: copr disable command traceback (RhBug:1693551)
  - [doc] state repoid as repo identifier of config-manager (RhBug:1686779)
  - [leaves] Show multiply satisfied dependencies as leaves
  - [download] Fix downloading an rpm from a URL (RhBug:1678582)
  - [download] Do not download src without ``--source`` (RhBug:1666648)
  - [download] Fix problem with downloading src pkgs (RhBug:1649627)
  - [download] Fix download of src when not the latest requested (RhBug:1649627)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.8-1
changelog:
  - Update to 4.0.8
  - [reposync] Enable timestamp preserving for downloaded data (RhBug:1688537)
  - [reposync] Download packages from all streams (RhBug:1714788)
  - Make yum-copr manpage available (RhBug:1673902)
  - [needs-restarting] Add --reboothint option (RhBug:1192946) (RhBug:1639468)
  - Set the cost of ``_dnf_local`` repo to 500, to make it preferred to normal
    repos


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.8-2
changelog:
  - Update localizations from zanata (RhBug:1689984)
  - Rename dnf-utils to yum-utils (RhBug:1722093)
  - [builddep] Report all rpm errors (RhBug:1724668)
  - [config-manager] Behaviour of --setopt (RhBug:1702678)


author: Ales Matej <amatej@redhat.com> - 4.0.10-1
changelog:
  - Update to 4.0.10
  - debuginfo-install: Update both debuginfo and debugsource for updated package (RhBug:1586084)
  - copr: Support multilib repofiles (RhBug:1393664)
  - copr: Fix disable if copr instance has non-default port
  - copr: Fix repoid when using subdirectories in copr project


author: Ales Matej <amatej@redhat.com> - 4.0.11-1
changelog:
  - Update to 4.0.11
  - [spec] Specify attributes for ghost file (RhBug:1754463)
  - download: add the --debugsource option (RhBug:1637008)
  - Fix incorrect handling richdeps in buildep (RhBug:1756902)


author: Ales Matej <amatej@redhat.com> - 4.0.12-1
changelog:
  - Update to 4.0.12
  - [reposync] Add --urls option (RhBug:1686602)
  - [versionlock] Add --raw option (RhBug:1645564)
  - [doc] move manpages for plugins to "dnf-PLUGIN" (RhBug:1706386)
  - Add new plugin post-transaction-actions (RhBug:967264)
  - [builddep] Add --skip-unavailable switch (RhBug:1628634)
  - [versionlock] Don't apply excludes on @System (RhBug:1726712)
  - [reposync] Ignore only modular excludes (RhBug:1750273)


author: Ales Matej <amatej@redhat.com> - 4.0.12-2
changelog:
  - [config-manager] Allow use of --set-enabled without arguments (RhBug:1679213)
  - [reposync] Fix --delete with multiple repos (RhBug:1774103)
  - Redesign reposync --latest for modular system (RhBug:1775434)


author: Ales Matej <amatej@redhat.com> - 4.0.15-1
changelog:
  - Update to 4.0.15
  - Fix: config_manager respect config file location during save
  - Fix conflict for dnf download --resolve (RhBug:1787908)
  - Fix: don't open stdin if versionlock is missing (RhBug:1785563)
  - config-manager calls parser error when without options (RhBug:1782822)
  - Update reposync.py with --norepopath option
  - Support remote files in dnf builddep
  - [versionlock] Prevent conflicting/duplicate entries (RhBug:1782052)
  - [download] Respect repo priority (RhBug:1800342)
  - [doc] Skip creating and installing migrate documentation for Python 3+


author: Nicola Sella <nsella@redhat.com> - 4.0.16-1
changelog:
  - Update to 4.0.16
  - [versionlock] Take obsoletes into account (RhBug:1627124)
  - Move args "--set-enabled", "--set-disabled" from DNF (RhBug:1727882)
  - Add missing arguments --set-enabled/--set-diabled into error message
  - Warn when --enablerepo/--disablerepo args were passed (RhBug:1727882)
  - [copr] add support for enabling/disabling runtime dependencies
  - [copr] no-liability text to be always printed


author: Nicola Sella <nsella@redhat.com> - 4.0.17-1
changelog:
  - [repomanage] Add modular support (RhBug:1804720)
  - [needs-restarting] add options using .conf file (RhBug:1810123)


author: Marek Blaha <mblaha@redhat.com> - 4.0.17-4
changelog:
  - Debug-restore command do not remove installonly packages (RhBug:1844533)
  - Update translations (RhBug:1820546)


author: Nicola Sella <nsella@redhat.com> - 4.0.18-1
changelog:
  - Update to 4.0.18
  - [needs-restarting] Fix plugin fail if needs-restarting.d does not exist
  - [needs-restarting] add kernel-rt to reboot list
  - Fix debug-restore command
  - [config-manager] enable/disable comma separated pkgs (RhBug:1830530)
  - [debug] Use standard demands.resolving for transaction handling
  - [debug] Do not remove install-only packages (RhBug:1844533)
  - return error when dnf download failed
  - README: Reference Fedora Weblate instead of Zanata
  - [reposync] Add latest NEVRAs per stream to download (RhBug: 1833074)
  - copr: don't try to list runtime dependencies


author: Marek Blaha <mblaha@redhat.com> - 4.0.18-2
changelog:
  - Introduce groups-manager plugin (RhBug:1826016)
  - [needs-restarting] add -s to list services (RhBug:1772939)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.21-1
changelog:
  - Update to 4.0.21
  - [repomanage] Don't use cached metadata (RhBug:1899852)
  - [needs-restarting] fix -r in nspawn containers (RhBug:1913962,1914251)
  - doc: add packages to needs-restarting conf
  - Set blacklist subcommand as deprecated
  - Removed dependency on dnf.yum.misc.Checksum class (RhBug:1935465)
  - Bugs fixed (RhBug:1914827,1916782)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.21-2
changelog:
  - [versionlock] Locking obsoleted package does not make the obsoleter unavailable (RhBug:1957280) 
  - [repomanage] Allow running with metadata only
  - [repomanage] Enhance repomanage documentation (RhBug:1898293)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.21-4
changelog:
  - [reposync] Don't stop downloading packages on the first error (RhBug:2009894)
  - [copr] Fix traceback of copr search (RhBug:2019868)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 4.0.21-7
changelog:
  - [groups-manager] Use full NEVRA for matching packages instead of only name (RhBug:2013633)
  - [versionlock] Fix: Multiple package-name-spec arguments don't lock (RhBug:2013324)
  - [versionlock] Update documentation for adding specifi version (RhBug:2013332)


author: Lukas Hrazky <lhrazky@redhat.com> - 4.0.21-12
changelog:
  - [repomanage] Use modules only from repo they are handling
  - [repomanage] Add new option --oldonly
  - Skip all non rpm tsi for transaction_action plugins
  - Update translations


author: Lukas Hrazky <lhrazky@redhat.com> - 4.0.21-13
changelog:
  - [copr] Fix 'dnf copr enable' on Fedora 35
  - [copr] Disable dnf playground command
  - [copr] Fix baseurl for centos stream chroot
  - [copr] Silence a deprecation warning in plugins/copr.py
  - [copr] Shorter verification that the project exists
  - [copr] Better error message for dnf copr enable
  - [copr] allow specifying protocol as part of --hub


author: Nicola Sella <nsella@redhat.com> - 4.0.21-17
changelog:
  - offline-upgrade: add support for security filters (RhBug:1939975,2139324)
  - Move system-upgrade plugin to core (RhBug:2054235)


author: Jaroslav Rohel <jrohel@redhat.com> - 4.0.21-20
changelog:
  - versionlock: Use only the most specific NEVRA (RhBug:1961217)
  - Fix boot time derivation for systems with no rtc (RhBug:2166444,2182157)
  - Doc update for reposync (RhBug:2132383,2182004)
  - reposync: Implement --safe-write-path option (RhBug:1898089,2203766)


author: Jaroslav Rohel <jrohel@redhat.com> - 4.0.21-21
changelog:
  - Remove patch: "reposync: Implement --safe-write-path option (RhBug:1898089,2203766)" (RhBug:2208444)


author: Jaroslav Mracek <jmracek@redhat.com> - 3.0.4-1
changelog:
  - [copr] Huge upgrade of copr plugin
  - [spec] Disable building python2 modules on Fedora 30+
  - Add characters into repo URL sanitization (RhBug:1615416)
  - copr: add support for multiple copr instances (RhBug:1478208)
  - Redirect repo progress to std error (RhBug:1626011)
  - Resolves: rhbz#1578787 - repodiff command not available in dnf-utils


author: Jaroslav Mracek <jmracek@redhat.com> - 4.0.0-1
changelog:
  - Update to 4.0.0
  - Enhance documentation
  - [repoclosure] check every --pkg attribute separately
  - [repoclosure] Now accepts nevra as a argument of --pkg option
  - [reposync] enhancements (RhBug:1550063,1582152,1550064,1405789,1598068)
  - package-cleanup: remove --oldkernels
  - Download only packages with unique NEVRAs (RhBug:1612874)


author: Jaroslav Mracek <jmracek@redhat.com> - 4.0.2-1
changelog:
  - Added repodif command
  - copr: fix enabling Rawhide repository
  - Add needs-restarting CLI shim
  - [reposync] Fix traceback with --quiet option
  - [versionlock] Accept more pkgspec forms


author: Daniel Mach <dmach@redhat.com> - 4.0.2.1-1
changelog:
  - zanata update
  - Attribute repo.metadata._comps_fn does not exist anymore
  - [download] Fix traceback when local rpm / url is passed
  - Run transaction hook only if transaction
  - [versionlock] Accept more NEVRA forms in the deletion code (RhBug:1654529)
  - [spec] Obsolete yum-utils < 1.1.31-513 (RhBug: 1579322)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 4.0-1
changelog:
  - New version
    Resolves: rhbz#1333781
  - Switched to autotools
  - Various spec file cosmetic fixes (e.g. used optflags)


author: Lukas Nykryn <lnykryn@redhat.com> - 049-100.git20201120
changelog:
  - multipath: require kpartx binary
  - Replace ln with systemctl
  - multipath: add automatic configuration for multipath
  - 98dracut-systemd: don't wait for root device if remote
  - 90crypt: pull in remote-cryptsetup.target enablement


author: Lukas Nykryn <lnykryn@redhat.com> - 049-127.git20210107
changelog:
  - match the whole string
  - match simplified rd.zfcp format too
  - base: hardcode rhel red
  - 95iscsi:
  - iscsi: fix error messages with iSCSI root
  - 95nvmf: add module for NVMe-oF
  - Write dns values passed by ip argument to ifcfg-* files
  - dracut.sh: added help for --regenerate-all
  - 35network-legacy: fix classless static route parsing
  - network: fix glob matching ipv6 addresses
  - dasd: only install /etc/dasd.conf if present
  - 90multipath: install kpartx's 11-dm-parts.rules
  - network/net-lib.sh: Configure all iBFT interfaces
  - Change the order of NFS servers during the boot NFS server
  - install: string_hash_func should not be fed with NULL
  - Consider also drm_dev_register when looking for gpu driver
  - fix graphics startup failure with the rhgb paramter in
  - Configure the runner for team interfaces
  - network-manager: set kernel hostname from the command line
  - 95nvmf: add NVMe over TCP support
  - 95fcoe: Add the rd.nofcoe option to disable the FCoE module
  - 04watchdog: split the watchdog module install
  - dracut.spec: include the 04watchdog-modules module
  - 95fcoe: ensure needed modules are installed


author: Lukas Nykryn <lnykryn@redhat.com> - 049-131.git20210107
changelog:
  - 00systemd: when putting systemd-vconsole-setup.service as a
  - 51-dracut-rescue.install: Don't use BLS fragment shipped by


author: Lukas Nykryn <lnykryn@redhat.com> - 049-133.git20210112
changelog:
  - 95fcoe: Fix startup when fcoe module is included
  - Fix pre-trigger stage by replacing exit with return in


author: Lukas Nykryn <lnykryn@redhat.com> - 049-151.git20210719
changelog:
  - Drop 51-dracut-rescue-postinst.sh entirely
  - fix(fips): add dh and ecdh ciphers
  - 35network-legacy: discard pointless RTNETLINK message
  - 95fcoe: don't install if there is no FCoE hostonly devices
  - 95nfs: set correct ownership and permissions for statd 
  - fix(dracut.sh): harden dracut against GZIP environment
  - fix(multipath): stop multipath before udev db cleanup
  - fix(dracut-functions): implement a cache for get_maj_min
  - fix(dracut-functions): get_maj_min without
  - fix(fcoe): rd.nofcoe=0 should disable fcoe
  - fix(fcoe): rename rd.nofcoe to rd.fcoe
  - fix(mdraid): remove offroot
  - fix(mdraid): add grow continue service
  - net-lib.sh: support infiniband network mac addresses
  - 95nvmf: add nvmf-autoconnect script


author: Lukas Nykryn <lnykryn@redhat.com> - 049-188.git20210802
changelog:
  - dracut-functions: fix botched backport
  - squash: unsquash the root image instead of mounting it on
  - 99squash: fail early if can't install require modules in
  - 99squash: Don't hardcode the squash sub directories
  - 99squash: improve pre-requirements check
  - Fixed some SUSE specific typos and outputs
  - 99squash: simplify the code
  - 99squash: Check require module earlier, and properly
  - fix(99squash): use kernel config instead of modprobe to check
  - kill bogus comment
  - busybox: simplify listing of supported utilities
  - fix: use find_binary
  - fix: shellcheck for modules.d/99squash/setup-squash.sh
  - fix: shellcheck for modules.d/99squash/clear-squash.sh
  - fix: shellcheck for modules.d/99squash/module-setup.sh
  - fix(squash): this module shouldn't depend on bash
  - refactor(squash): move the post install scripts into the
  - fix: revise squash module checks
  - fix(squash): post install should be the last step before
  - refactor(squash): move all setup code to init-squash.sh
  - feat(squash): install and depmod modules seperately
  - refactor(squash): don't record mount points in text file
  - lsinitrd: list squash content as well
  - refactor(squash): structure in a cleaner way
  - feat(squash): use busybox for early setup if available
  - feat: squash module follow --compress option
  - perf: disable initrd compression when squash module is
  - fix(squash): shellcheck for modules.d/99squash
  - fix(squash): don't mount the mount points if already mounted
  - feat(squash): install umount util
  - fix(squash): create relative symlinks
  - fix(dracut.sh): handle '-i' option to include files beginning
  - fix(dracut.sh): handle symlinks appropriately while using
  - fix(squash): keep ld cache under initdir
  - dracut-functions: backport block_is_* functions
  - fix(squash): fixes related to squash module rebase
  - fix(squash): remove tailing '/' when installing ld.so.conf.d


author: Pavel Valena <pvalena@redhat.com> - 049-201.git20220131
changelog:
  - ci: introduce C8S based GHA CI
  - ci: backport TEST-21-NFS-NM
  - dracut.sh: fix early microcode detection logic
  - fix(url-lib): make pre-pivot hook separetely per nfs mount
  - fix(watchdog): replace return with echo
  - fix(network): add errors and warnings when network interface
  - dracut.sh: add check for invalid configuration files
  - fips: removed false-positive 'FATAL: Module xxx not found'
  - fix(shutdown): be robust against forced shutdown
  - fix(fips): handle s390x OSTree systems


author: Pavel Valena <pvalena@redhat.com> - 049-209.git20220815
changelog:
  - fix(95iscsi): Fix network setup
  - fix(dracut-systemd): correct service dependencies
  - feat(lvm): add new module lvmthinpool-monitor
  - fix(dracut-shutdown): add cleanup handler on failure


author: Pavel Valena <pvalena@redhat.com> - 049-218.git20221019
changelog:
  - Dracut: only login to one target at a time
  - iscsi: don't continue waiting if the root device is present
  - network: stop waiting for interfaces if root device is
  - iscsiroot: parse_iscsi_root overwrites command line args
  - iscsiroot: there's never more than one target per call
  - iscsiroot: try targets only once
  - iscsiroot: remove bashisms
  - fixup "Dracut: only login to one target at a time"
  - 35network-legacy: only skip waiting for interfaces if netroot


author: Pavel Valena <pvalena@redhat.com> - 049-221.git20221214
changelog:
  - fix(80lvmthinpool-monitor): use systemsctl instead of
  - fix(squash): build ld cache for squash loader
  - fix(network-manager): write DHCP filename option to dhcpopts


author: Pavel Valena <pvalena@redhat.com> - 049-231.git20231115
changelog:
  - fix(iscsi): do not exit in handle_netroot() if discovery
  - feat(systemd): install systemd-sysroot-fstab-check
  - fix(fcoe-uefi): exit early on empty vlan


author: Pavel Valena <pvalena@redhat.com> - 049-237.git20250603
changelog:
  - fix(rescue): create hmac file for rescue kernel
  - fix(spec): drop %config from 50-network-legacy.conf


author: Lukas Nykryn <lnykryn@redhat.com> - 049-17.git20190725
changelog:
  - rngd: new module running early during boot to help generating entropy when system's default entropy sources are poor (e.g. use of SSD disks or UEFI RNG not available)


author: Lukas Nykryn <lnykryn@redhat.com> - 049-24.git20190802
changelog:
  - 95fcoe: load 'libfcoe' module as a fallback
  - 99base: enable the initqueue in both 'dracut --add-device' and 'dracut --mount' cases
  - dracut: let module handling function accept optional path option
  - squash: also squash systemctl if switch-root is not needed
  - squash: fix and simplify required_in_root
  - squash: squash systemd binary and udevadm


author: Lukas Nykryn <lnykryn@redhat.com> - 049-60.git20191129
changelog:
  - 99squash: Only start the cleaner on switch-root
  - net-lib: check if addr exists before checking for dad state
  - always include sg module


author: Lukas Nykryn <lnykryn@redhat.com> - 049-63.git20200114
changelog:
  - network-legacy/ifup: fix typo when calling dhclient --timeout
  - network-legacy/ifup: dhclient should be started in oneshot mode
  - modules/network-manager: Install `ip`


author: Lukas Nykryn <lnykryn@redhat.com> - 049-68.git20200211
changelog:
  - Revert "wait for IPv6 RA if using none/static IPv6 assignment"
  - dhclient-script: ipv6 uses different variables for nameservers
  - 40network: bump rd.net.timeout.carrier to 10 seconds


author: Lukas Nykryn <lnykryn@redhat.com> - 049-89.git20200625
changelog:
  - Adapt to the new udevadm version output
  - network-manager: move connection generation to a lib file
  - cms: regenerate NetworkManager connections


author: Lukas Nykryn <lnykryn@redhat.com> - 049-92.git20200702
changelog:
  - install/dracut-install.c: install module dependencies of
  - install: also install post weak dependencies of kernel


author: Lukas Nykryn <lnykryn@redhat.com> - 049-94.git20200709
changelog:
  - dracut.sh: Move the library workaround after squash
  - dracut.sh: FIPS workaround for openssl-libs on Fedora/RHEL


author: Lukas Nykryn <lnykryn@redhat.com> - 049-75.git20200422
changelog:
  - network-manager: fix getting of ifname from the sysfs path
  - network-manager: don't run NetworkManager when there are no
  - network-manager: ensure that nm-run.sh is executed when
  - network-manager: install libnss DNS and mDNS plugins
  - Always pull in machinery to read ifcfg files


author: Lukas Nykryn <lnykryn@redhat.com> - 049-83.git20200525
changelog:
  - Remove memtrace-ko and rd.memdebug=4 support in dracut
  - Add 99memstrack module
  - the strip command should avoid changing the file modification
  - dracut.sh: Adjust squash and strip order
  - Fine tune mksquashfs options for squash module
  - 90kernel-modules: don't install any block driver if not
  - 95znet: Add a rd.znet_ifname= option
  - Revert "[RHEL] network: default to network-legacy even in


author: Josef Ridky <jridky@redhat.com> - 1:0.4-0.1.b45
changelog:
  - New upstream release 0.4b45 (#1361495)
  - Fix issue with bad UUID error message (#1048548)
  - Spec file has been updated


author: Lukas Czerner <lczerner@redhat.com> 1.45.4-1
changelog:
  - Rebase to the release 1.45.4 (#1783777)
  - provide rhel6/7 compatible fs_type in mke2fs.conf (#1780279)
  - fix crafted ext4 partition leads to out-of-bounds write (#1768709)
  - include note about supported rhel8 features and options (#1788573)


author: Lukas Czerner <lczerner@redhat.com> 1.45.6-5
changelog:
  - Update e2fsprogs with upstream fixes and improvements (#2083621)
  - Fix out-of-bounds read/write via crafter filesystem (#2073548)


author: Peter Jones <pjones@redhat.com> - 3-2
changelog:
  - Always provide macros for efi_arch and efi_alt_arch (and their _upper
    variants), and make efi_has_arch and efi_has_alt_arch 0 when they will be
    wrong.  This ensures everything can always expand when we're on a non-efi
    architecture.


author: Peter Jones <pjones@redhat.com> - 15-1
changelog:
  - Update to efibootmgr 15
  - Make efibootmgr use EFIDIR / efibootmgr.efidir like fwupdate does
  - make --loader default build-time configurable
  - sanitize set_mirror()/get_mirror()
  - Add support for parsing loader options as UCS2
  - GCC 7 fixes
  - Don't use -fshort-wchar since we don't run on EFI machines.
  - Also rebuild for efivar-31-1.fc26 to get symbol versioning right.
    Resolves: rhbz#1468841


author: Peter Jones <pjones@redhat.com> - 32-1
changelog:
  - efivar 32
  - lots of coverity fixes; mostly leaked memory and fds and the like
  - fix sysfs pci path formats
  - handle device paths for dns, nfit, bluetooth, wifi, emmc, btle.
  - improved abi checking on releases
  - Fix failures on EDIT_WRITE in edit_variable() when the variable doesn't exist
  - Add efi_guid_ux_capsule_guid to our guids
  - Now with %check


author: Peter Jones <pjones@redhat.com> - 35-1
changelog:
  - Update to efivar 35
  - fixes for older compilers
  - efi_get_variable_exists()
  - Lots of stuff to make CI work.
  - use usleep() to avoid hitting the kernel rate limiter on efivarfs
  - better EFI_GUID macro
  - add efi_guid_fwupdate (0abba7dc-e516-4167-bbf5-4d9d1c739416)


author: Peter Jones <pjones@redhat.com> - 36-1
changelog:
  - Update to efivar 36 (and some change)
    Resolves: rhbz#1635019
  - Add NVDIMM support
  - Re-written linux interface parser to handle how devices are
    partitioned better, and for cleaner code, with one file per device
    type.
  - lots of verbosity updates
  - better CI
  - analysis with clang's analyzer as well as coverity
  - Better handling of immutable bits in sysfs
  - LIBEFIVAR_OPS=help
  - lots of code cleanups.
  - Add emmc device support
  - Add SAS port expander support
  - Support for ACPI root nodes that are less common
    (i.e. ACPI Generic Container and Embedded Controller PNP nodes)
  - Make abbreviated device paths if we can't parse a device's info
  - Don't require NVME to have an EUI


author: Mark Wielaard <mjw@redhat.com> - 0.174-4
changelog:
  - Add elfutils-0.174-size-rec-ar.patch
    CVE-2018-18520 (#1646479)
  - Add elfutils-0.174-ar-sh_entsize-zero.patch
    CVE-2018-18521 (#1646484)


author: Mark Wielaard <mjw@redhat.com> - 0.174-5
changelog:
  - Add elfutils-0.174-x86_64_unwind.patch (#1650114).
  - Add elfutils-0.174-gnu-property-note.patch (#1650120).
  - Add elfutils-0.174-version-note.patch.
  - Add elfutils-0.174-gnu-attribute-note.patch (#1650125).


author: Mark Wielaard <mjw@fedoraproject.org> - 0.176-1
changelog:
  - New upstream release.
    - backends: riscv improved core file and return value location support.
    - Fixes CVE-2019-7146, CVE-2019-7148, CVE-2019-7149, CVE-2019-7150,
            CVE-2019-7664, CVE-2019-7665.


author: Mark Wielaard <mjw@redhat.com> - 0.178-2
changelog:
  - New upstream release.
    - debuginfod: New server, client tool and library to index and fetch
                  ELF/DWARF files addressed by build-id through HTTP.
    - doc: There are now some manual pages for functions and tools.
    - backends: The libebl libraries are no longer dynamically loaded
                through dlopen, but are now compiled into libdw.so directly.
    - readelf: -n, --notes now takes an optional "SECTION" argument.
               -p and -x now also handle section numbers.
               New option --dyn-sym to show just the dynamic symbol table.
    - libcpu: Add RISC-V disassembler.
    - libdw: Abbrevs and DIEs can now be read concurrently by multiple
             threads through the same Dwarf handle.
    - libdwfl: Will try to use debuginfod when installed as fallback to
               retrieve ELF and DWARF debug data files by build-id.
  - Fix libdebuginfod file list for debuginfo-client[-devel].


author: Mark Wielaard <mjw@redhat.com> - 0.178-4
changelog:
  - Add elfutils-debuginfod-client Provides and Requires with depsuffix
    to get multilib dependencies correct. Add %{version}-%{release} to
    keep subpackages in sync.


author: Mark Wielaard <mjw@redhat.com> - 0.182-1
changelog:
  - Upgrade to upstream 0.182
    - backends: Support for tilegx has been removed.
    - config: New /etc/profile.d files to provide default $DEBUGINFOD_URLS.
    - debuginfod: More efficient package traversal, tolerate various
      errors during scanning, grooming progress is more visible and
      interruptible, more prometheus metrics.
    - debuginfod-client: Now supports compressed (kernel) ELF images.
    - libdwfl: Add ZSTD compression support.


author: Mark Wielaard <mjw@redhat.com> - 0.186-1
changelog:
  - Upgrade to upstream 0.186
    - debuginfod-client: Default $DEBUGINFOD_URLS is computed from
      drop-in files /etc/debuginfod/*.urls rather than
      hardcoded into the /etc/profile.d/debuginfod*
      scripts.
      Add $DEBUGINFOD_MAXSIZE and $DEBUGINFOD_MAXTIME settings
      for skipping large/slow transfers.
      Add $DEBUGINFOD_RETRY for retrying aborted lookups.
    - debuginfod: Supply extra HTTP response headers, describing
      archive/file names that satisfy the requested buildid content.
      Support -d :memory: option for in-memory databases.
      Protect against loops in federated server configurations.
      Add -r option to use -I/-X regexes for grooming stale files.
      Protect against wasted CPU from duplicate concurrent requests.
      Limit the duration of groom ops roughly to rescan (-t) times.
      Add --passive mode for serving from read-only database.
      Several other performance improvements & prometheus metrics.
    - libdw: Support for the NVIDIA Cuda line map extensions.
      DW_LNE_NVIDIA_inlined_call and DW_LNE_NVIDIA_set_function_name
      are defined in dwarf.h. New functions dwarf_linecontext and
      dwarf_linefunctionname.
    - translations: Update Japanese translation.


author: Mark Wielaard <mjw@redhat.com> - 0.187-4
changelog:
  - Upgrade to elfutils 0.187
    - debuginfod: Support -C option for connection thread pooling.
    - debuginfod-client: Negative cache file are now zero sized instead
      of no-permission files.
    - addr2line: The -A, --absolute option, which shows file names
      includingthe full compilation directory is now the
      default.  To get theold behavior use the new option --relative.
    - readelf, elflint: Recognize FDO Packaging Metadata ELF notes
    - libdw, debuginfo-client: Load libcurl lazily only when files need
      to be fetched remotely. libcurl is now never loaded when
      DEBUGINFOD_URLS is unset. And whenDEBUGINFOD_URLS is set,
      libcurl is only loaded when the debuginfod_begin function is
      called.
  - Add elfutils-0.187-csh-profile.patch
  - Add elfutils-0.187-debuginfod-client-fd-leak.patch
  - Add elfutils-0.187-mhd_no_dual_stack.patch
  - Add elfutils-0.187-mhd_epoll.patch
  - Add an explicit versioned requires from elfutils-debuginfod-client
    on elfutils-libs and elfutils-libelf.
  - Remove brew testsuite workarounds


author: Mark Wielaard <mjw@redhat.com> - 0.189-3
changelog:
  - Add elfutils-0.189-elf_getdata_rawchunk.patch
  - Add elfutils-0.189-debuginfod_config_cache-double-close.patch


author: Mark Wielaard <mjw@redhat.com> - 0.190-1
changelog:
  - Upgrade to upstream elfutils 0.190
  - Add eu-srcfiles
  - Drop upstreamed patches
    elfutils-0.189-debuginfod_config_cache-double-close.patch
    elfutils-0.189-elf_getdata_rawchunk.patch
    elfutils-0.189-elfcompress.patch
  - Only package debuginfod-client-config.7 manpage for debuginfod-client


author: Jacek Migacz <jmigacz@redhat.com> - 1:26.1-10
changelog:
  - Fix etags local command injection vulnerability (#2175189)
  - Fix htmlfontify.el command injection vulnerability (#2175178)
  - Fix ob-latex.el command injection vulnerability (#2180587)


author: Jacek Migacz <jmigacz@redhat.com> - 1:26.1-12
changelog:
  - org-file-contents: Consider all remote files unsafe (CVE-2024-30205)
  - org-link-expand-abbrev: Do not evaluate arbitrary unsafe Elisp code (CVE-2024-39331)
  - Make Gnus treats inline MIME contents as untrusted (CVE-2024-30203)
  - Disable xwidgets (RHEL-14549)


author: Jan Synáček <jsynacek@redhat.com> - 4.1.1-1
changelog:
  - Update to 4.1.1 (#1546450, #1139165, #1545369)
    + Big thanks to Xavier Delaruelle for a spec patch!


author: Tomas Korbar <tkorbar@redhat.com> - 2.2.5-5
changelog:
  - Fix multiple CVEs
  - CVE-2022-23852 expat: integer overflow in function XML_GetBuffer
  - CVE-2021-45960 expat: Large number of prefixed XML attributes on a single tag can crash libexpat
  - CVE-2021-46143 expat: Integer overflow in doProlog in xmlparse.c
  - CVE-2022-22827 Integer overflow in storeAtts in xmlparse.c
  - CVE-2022-22826 Integer overflow in nextScaffoldPart in xmlparse.c
  - CVE-2022-22825 Integer overflow in lookup in xmlparse.c
  - CVE-2022-22824 Integer overflow in defineAttribute in xmlparse.c
  - CVE-2022-22823 Integer overflow in build_model in xmlparse.c
  - CVE-2022-22822 Integer overflow in addBinding in xmlparse.c
  - Resolves: CVE-2022-23852
  - Resolves: CVE-2021-45960
  - Resolves: CVE-2021-46143
  - Resolves: CVE-2022-22827
  - Resolves: CVE-2022-22826
  - Resolves: CVE-2022-22825
  - Resolves: CVE-2022-22824
  - Resolves: CVE-2022-22823
  - Resolves: CVE-2022-22822


author: Tomas Korbar <tkorbar@redhat.com> - 2.2.5-6
changelog:
  - Fix multiple CVEs
  - CVE-2022-25236 expat: namespace-separator characters in "xmlns[:prefix]" attribute values can lead to arbitrary code execution
  - CVE-2022-25235 expat: malformed 2- and 3-byte UTF-8 sequences can lead to arbitrary code execution
  - CVE-2022-25315 expat: integer overflow in storeRawNames()
  - Resolves: CVE-2022-25236
  - Resolves: CVE-2022-25235
  - Resolves: CVE-2022-25315


author: Tomas Korbar <tkorbar@redhat.com> - 2.2.5-10.1
changelog:
  - CVE-2022-43680 expat: use-after free caused by overeager destruction of a shared DTD in XML_ExternalEntityParserCreate
  - Resolves: CVE-2022-43680


author: Tomas Korbar <tkorbar@redhat.com> - 2.2.5-14
changelog:
  - Fix multiple CVEs
  - Fix CVE-2024-45492 integer overflow
  - Fix CVE-2024-45491 Integer Overflow or Wraparound
  - Fix CVE-2024-45490 Negative Length Parsing Vulnerability
  - Resolves: RHEL-57505
  - Resolves: RHEL-57493
  - Resolves: RHEL-56751


author: Tomas Korbar <tkorbar@redhat.com> - 2.2.5-4.2
changelog:
  - Fix multiple CVEs
  - Resolves: CVE-2022-25236
  - Resolves: CVE-2022-25235
  - Resolves: CVE-2022-25315


author: Chris Leech <cleech@redhat.com> - 1.0.32-6
changelog:
  - remove fcoe from SUPPORTED_DRIVERS in /etc/sysconfig/fcoe
  - add qedf to SUPPORTED_DRIVERS in /etc/sysconf/fcoe
  - added upstream fix for large fcoe ctrl numbers


author: Kamil Dudka <kdudka@redhat.com> - 5.33-4
changelog:
  - do not classify shared libraries as pie executables (#1581343)
  - seccomp: fix build failure due to missing syscalls


author: Kamil Dudka <kdudka@redhat.com> - 5.33-7
changelog:
  - show details about ppc swap partition (#1224668)
  - support longer version strings for clamav database (#1539107)


author: Kamil Dudka <kdudka@redhat.com> - 5.33-11
changelog:
  - improve documentation of --apple in file(1) man page (#1677442)
  - improve parsing of ppc core files (#1658171)


author: Miro Hrončok <mhroncok@redhat.com> - 5.33-3
changelog:
  - Update Python macros to new packaging standards
    (See https://fedoraproject.org/wiki/Changes/Avoid_usr_bin_python_in_RPM_Build)


author: Ondrej Vasik <ovasik@redhat.com> - 3.6-1
changelog:
  - own /usr/share/bash-completion{,/completions,/helpers} (#1504616)
  - create and own /usr/lib/debug/.dwz dir to prevent
    dangling symlink (#1508610)


author: Ondrej Vasik <ovasik@redhat.com> - 3.7-1
changelog:
  - own /usr/share/locale and /usr/lib/modules
  - own /usr/lib/sysimage
  - improve filesystem content file to include symlinks and rootdir


author: Tomas Mraz <tmraz@redhat.com> - 1.2.0-1
changelog:
  - add lib subpackage to avoid multilib on the base package
  - add ability to compute hmacs on multiple files at once
  - improved debugging with FIPSCHECK_DEBUG


author: Eric Garver <egarver@redhat.com> - 0.6.3-4
changelog:
  - backport recent stable fixes
  - backport fix for lost NM interfaces during reload
  - backport rich rule priorities
  - backport fix for set entries not applied
  - update translations


author: Eric Garver <egarver@redhat.com> - 0.7.0-3
changelog:
  - backport patch to show service includes in service output
  - backport patches to fix dbus API break


author: Eric Garver <egarver@redhat.com> - 0.8.2-2
changelog:
  - fix(cli): add ipset type hash:mac is incompatible with the family parameter
  - fix(cli): add --zone is an invalid option with --direct
  - fix: update dynamic DCE RPC ports in freeipa-trust service
  - fix: core: rich: Catch ValueError on non-numeric priority values
  - fix(rich): icmptypes with one family
  - fix(direct): rule in a zone chain
  - plus additional upstream stable fixes


author: Eric Garver <egarver@redhat.com> - 0.8.2-3
changelog:
  - fix(nftables): packet marks with masks
  - fix(nftables): icmp types with code == 0
  - fix(rich icmptype): verify rule and icmptype families
  - fix(zone): cache rule_str for rich rules
  - improvement(service): IPsec: Update description and add TCP port 4500
  - feat(service): add collectd service
  - feat(service): Add rpc-rquotad.service


author: Eric Garver <egarver@redhat.com> - 0.9.3-12
changelog:
  - feat(config): add CleanupModulesOnExit configuration option
  - change default CleanupModulesOnExit=yes


author: Akira TAGOH <tagoh@redhat.com> - 2.13.0-6
changelog:
  - Add Suggests: dejavu-sans-fonts to address pulling the unpredicted
    font package as dependency. (#1321551)


author: Akira TAGOH <tagoh@redhat.com> - 2.13.1-3
changelog:
  - Stop cleaning up .uuid file even when a directory is empty.
    resolves: rhbz#1653171
  - Use Rachana instead of Meera for serif subsitution.
    resolves: rhbz#1650491


author: Josef Ridky <jridky@redhat.com> - 1.5.6-1
changelog:
  - New upstream release 1.5.6 (#1468062)
  - Fix issue with capital letters in commands in manpage (#1468984)


author: Pavel Cahyna <pcahyna@redhat.com> - 1.6.14-2
changelog:
  - Apply upstream patch 41d0d70f
    ipmi-config: fix incorrect output of IPv6_Dynamic_Address_Source_Type


author: Pavel Reichl <preichl@redhat.com> - 2.9.7-16
changelog:
  - Back-port max_pages support,
  - caching symlinks in kernel page cache,
  - and in-kernel readdir caching
  - Fixed rhbz#2080000


author: Richard Hughes <richard@hughsie.com> 1.1.3-1
changelog:
  - New upstream release
  - Adds support for an upcoming Dell USB-C dock
  - Don't use an obsolete font when building the UEFI images
  - Resolves: #1607842


author: Richard Hughes <richard@hughsie.com> 1.1.4-1
changelog:
  - New upstream release
  - Use HTTPS_PROXY if set
  - Make the dell-dock plugin more robust in several ways
  - Adjust EVB board handling
  - Resolves: #1647557


author: Richard Hughes <richard@hughsie.com> 1.4.2-1
changelog:
  - New upstream release
  - Backport a patch to fix the synaptics fingerprint reader update.
  - Resolves: #1775277


author: Richard Hughes <richard@hughsie.com> 1.5.4-1
changelog:
  - Rebase package to include support for latest OEM hardware and to
    support deploying UEFI SecureBoot dbx updates.
  - Resolves: #1870811


author: Richard Hughes <richard@hughsie.com> 1.5.5-2
changelog:
  - Do not invalidate all remote timestamps during package install to fix rpm -V.
  - Backport some important high priority fixes from upstream.
  - Resolves: #1926382


author: Richard Hughes <richard@hughsie.com> 1.5.9-3
changelog:
  - Rebase to include the SBAT metadata section to allow fixing BootHole
  - Resolves: rhbz#1933012
  - Resolves: rhbz#1932953
  - Resolves: rhbz#1932909
  - Resolves: rhbz#1932882
  - Resolves: rhbz#1932579
  - Resolves: rhbz#1932553
  - Resolves: rhbz#1932423


author: Richard Hughes <richard@hughsie.com> 1.7.1-1
changelog:
  - New upstream release
  - Backport upstream changes
  - Include support for Dell TBT4 Docking stations
  - Resolves: rhbz#1969472
  - Resolves: rhbz#1976408


author: Richard Hughes <richard@hughsie.com> 1.7.1-2
changelog:
  - Disable the Logitech bulkcontroller plugin to avoid adding a dep to protobuf-c
    which lives in AppStream, not BaseOS.
  - Resolves: rhbz#2029333


author: Richard Hughes <richard@hughsie.com> 1.7.4-1
changelog:
  - Include support for Lenovo TBT4 Docking stations
  - Do not cause systemd-modules-load failures
  - Resolves: rhbz#2038258
  - Resolves: rhbz#2037294


author: Peter Jones <pjones@redhat.com> - 10-4
changelog:
  - Roll in some bugfixes that'll be in fwupdate-11 upstream.
    This helps fix a couple of vendors machines.


author: Charles R. Anderson <cra@wpi.edu> - 2008_10_13-10
changelog:
  - Patch to apply CFLAGS/LDFLAGS to final link so RPM_OPT_FLAGS are picked up (rhbz#1548426)
  - Use CC=gcc explicitly
  - Regenerate fxload-noa3load.patch


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.1.4-7
changelog:
  - Revert previous change of adding 'awk*' symlinks for info pages (bug #1486924)
  - Added patch to correctly fix the info pages issue (bug #1486924)
  - specfile content refactored for better readability
  - Package now provides its ABI version via gawk(abi)
  - Added test for usage of correct gawk(abi) into %check section


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.2.0-1
changelog:
  - Update to latest stable release from upstream [new API version - 2.0]
  - Added latest relevant patches from upstream's gawk-4.2-stable branch


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 4.2.0-2
changelog:
  - 'noarch' removed from *-devel subpackage
  - added arch requirement for *-devel subpackage
  - updated the build process to use %make_build macro


author: <fjanus@redhat.com> - 1.18-2
changelog:
  - Add backward compatibility patch
  - Resolves: #2097704
  - Backport from upstream commit: 00ba17479ff31c6825f0e6f28b965f11525e83f6


author: Tomas Popela <tpopela@redhat.com> - 2.36.12-6
changelog:
  - Backport fixes for CVE-2022-48622
  - Apply patches with git to enable binary patching
  - Resolves: RHEL-30478


author: Andrew Price <anprice@redhat.com> - 3.2.0-2
changelog:
  - fsck.gfs2: Don't check fs formats we don't recognise
  - libgfs2: Fix pointer cast byte order issue
    Resolves: rhbz#1622050


author: Andrew Price <anprice@redhat.com> - 3.2.0-9
changelog:
  - gfs2_jadd: Handle out-of-space issues
  - gfs2_jadd: error handling overhaul
    Resolves: rhbz#1833141
  - gfs2.5: Update some mentions of gfs2_tool
    Resolves: rhbz#1818983


author: Andrew Price <anprice@redhat.com> - 3.2.0-11
changelog:
  - gfs2_jadd: Use fallocate to preallocate journals
  - gfs2_jadd: Don't fsync after each block written
    Resolves: rhbz#1942434


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-9
changelog:
  - Update GHmac patch to implement g_hmac_copy()
    Resolves: #1786538
  - Update keyfile settings backend
    Resolves: #1728896
  - Fix CVE-2019-13012
    Resolves: #1728632


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-10
changelog:
  - Fix various problems in GMainContext
    Resolves: #1953553
  - Fix CVE-2021-27219
    Resolves: #1960600


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-10
changelog:
  - Fix CVE-2021-27218
    Resolves: #1939072
  - Fix CVE-2021-27219
    Resolves: #1939108
  - Fix CVE-2021-28153
    Resolves: #1939118


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-13
changelog:
  - Rename and consolidate existing patches for better maintainability
  - Refresh CVE-2021-27219 patcheset, using better-targeted fixes
    Resolves: #1939108


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-163
changelog:
  - Backport GUnixMountMonitor port to libmnt_monitor
  - Make GUnixMountMonitor thread-safe
  - Resolves: RHEL-23636


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-164
changelog:
  - Revert GUnixMountMonitor changes (it depends on functionality not in RHEL 8)
  - Resolves: RHEL-23636


author: Michael Catanzaro <mcatanzaro@redhat.com> - 2.56.4-166
changelog:
  - Add patches for CVE-2024-34397, CVE-2024-52533, CVE-2025-4373
  - Update GDateTime test for new tzdata
  - Resolves: RHEL-67084
  - Resolves: RHEL-94286
  - Resolves: RHEL-94848


author: Siddhesh Poyarekar <siddhesh@redhat.com> - 2.28-164.2
changelog:
  - CVE-2022-23218, CVE-2022-23219: Fix buffer overflows in sunrpc clnt_create
    for "unix" and svcunix_create (#2045062).


author: Siddhesh Poyarekar <siddhesh@redhat.com> - 2.28-188
changelog:
  - CVE-2022-23218, CVE-2022-23219: Fix buffer overflows in sunrpc clnt_create
    for "unix" and svcunix_create (#2045063).


author: Carlos O'Donell <carlos@redhat.com> - 2.28-209
changelog:
  - Improve dynamic loader auditing interface (LD_AUDIT) (#2047981)
  - Add dlinfo() API support for RTLD_DI_PHDR (#2097898)


author: Florian Weimer <fweimer@redhat.com> - 2.28-211
changelog:
  - Preserve GLRO (dl_naudit) internal ABI (#2119304)
  - Avoid s390x ABI change due to z16 recognition on s390x (#2119304)


author: Arjun Shankar <arjun@redhat.com> - 2.28-216
changelog:
  - Retain .gnu_debuglink section for libc.so.6 (#2115830)
  - Remove .annobin* symbols from ld.so
  - Remove redundant ld.so debuginfo file


author: Florian Weimer <fweimer@redhat.com> - 2.28-251.2
changelog:
  - CVE-2024-33599: nscd: buffer overflow in netgroup cache (RHEL-34264)
  - CVE-2024-33600: nscd: null pointer dereferences in netgroup cache (RHEL-34267)
  - CVE-2024-33601: nscd: crash on out-of-memory condition (RHEL-34271)
  - CVE-2024-33602: nscd: memory corruption with NSS netgroup modules (RHEL-34273)


author: Patsy Griffin <patsy@redhat.com> - 2.28-251.4
changelog:
  - elf: Avoid some free (NULL) calls in _dl_update_slotinfo
  - elf: Support recursive use of dynamic TLS in interposed malloc (RHEL-39994)


author: Patsy Griffin <patsy@redhat.com> - 2.28-251.5
changelog:
  - elf: Clarify and invert second argument of _dl_allocate_tls_init
  - elf: Avoid re-initializing already allocated TLS in dlopen (RHEL-36147)


author: Patsy Griffin <patsy@redhat.com> - 2.28-251.19
changelog:
  - libio: Fix a deadlock after fork in popen
  - libio: Correctly link tst-popen-fork against libpthread (RHEL-86018)


author: Florian Weimer <fweimer@redhat.com> - 2.28-65
changelog:
  - glibc-all-langpacks: Do not delete locale archive during update (#1717347)
  - Do not mark /usr/lib/locale/locale-archive as a configuration file
    because it is always automatically overwritten by build-locale-archive.


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-6
changelog:
  - fixes bugs bz#1668001 bz#1708043 bz#1708183 bz#1710701 
    bz#1719640 bz#1720079 bz#1720248 bz#1720318 bz#1720461


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-7
changelog:
  - fixes bugs bz#1573077 bz#1600918 bz#1703423 bz#1704207 bz#1708064
    bz#1709301 bz#1713664 bz#1716760 bz#1717784 bz#1720163 bz#1720192
    bz#1720551 bz#1721351 bz#1721357 bz#1721477 bz#1722131 bz#1722331
    bz#1722509 bz#1722801 bz#1720248


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-8
changelog:
  - fixes bugs bz#1698435 bz#1712591 bz#1715447 bz#1720488 bz#1722209
    bz#1722512 bz#1724089 bz#1726991 bz#1727785 bz#1729108


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-12
changelog:
  - fixes bugs bz#1730914 bz#1731448 bz#1732770 bz#1732792 bz#1733531 
    bz#1734305 bz#1734534 bz#1734734 bz#1735514 bz#1737705 bz#1732774
    bz#1732793


author: Sunil Kumar Acharya <sheggodu@redhat.com> - 6.0-14
changelog:
  - fixes bugs bz#1719171 bz#1728673 bz#1731896 bz#1732443 bz#1733970 
    bz#1745107 bz#1746027 bz#1748688 bz#1750241 bz#1572163


author: Rinku Kothiya <rkothiya@redhat.com> - 6.0-23
changelog:
  - fixes bugs bz#1344758 bz#1599802 bz#1685406 bz#1686800 bz#1724021 
    bz#1726058 bz#1727755 bz#1731513 bz#1741193 bz#1758923 bz#1761326 bz#1761486 
    bz#1762180 bz#1764095 bz#1766640


author: Deepshikha Khandelwal <dkhandel@redhat.com> - 6.0-37.1
changelog:
  - fixes bugs bz#1848890 bz#1848891 bz#1848893 bz#1848894 bz#1848895 
    bz#1848896 bz#1848899 bz#1849533


author: Gluster Jenkins <dkhandel+glusterjenkins@redhat.com> - 6.0-50
changelog:
  - fixes bugs bz#1224906 bz#1412494 bz#1612973 bz#1663821 bz#1691320 
    bz#1726673 bz#1749304 bz#1752739 bz#1779238 bz#1813866 bz#1814744 bz#1821599 
    bz#1832306 bz#1835229 bz#1842449 bz#1865796 bz#1878077 bz#1882923 bz#1885966 
    bz#1890506 bz#1896425 bz#1898776 bz#1898777 bz#1898778 bz#1898781 bz#1898784 
    bz#1903468


author: Gluster Jenkins <dkhandel+glusterjenkins@redhat.com> - 6.0-57
changelog:
  - fixes bugs bz#1600379 bz#1689375 bz#1782428 bz#1798897 bz#1815462 
    bz#1889966 bz#1891403 bz#1901468 bz#1903911 bz#1908635 bz#1917488 bz#1918018 
    bz#1919132 bz#1925425 bz#1927411 bz#1927640 bz#1928676 bz#1942816 bz#1943467 
    bz#1945143 bz#1946171 bz#1957191 bz#1957641


author: Gluster Jenkins <dkhandel+glusterjenkins@redhat.com> - 6.0-60
changelog:
  - fixes bugs bz#1668303 bz#1853631 bz#1901468 bz#1904137 bz#1911665 
    bz#1962972 bz#1973566 bz#1994593 bz#1995029 bz#1997447 bz#2006205


author: Gluster Jenkins <dkhandel+glusterjenkins@redhat.com> - 6.0-62
changelog:
  - fixes bugs bz#1937314 bz#1950470 bz#2005767 bz#2005779 bz#2006631 
    bz#2015092 bz#2015551 bz#2015937 bz#2017641 bz#2026382 bz#2026833 bz#2030243


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 1:6.1.2-3
changelog:
  - Build process updated to correctly build .debug_info for i386
    and to correctly use hardening flags


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 1:6.1.2-8
changelog:
  - Missing fipschecks added into build process (bug #1553679)
  - --enable-fat option added to %configure (bug #1493218)


author: Jakub Martisko <jamartis@redhat.com> - 1:6.1.2-9
changelog:
  - Add support for intel CET and -fcf-protection
  - Add missing compiler/linker flags
  Related: #1630567


author: Daiki Ueno <dueno@redhat.com> - 3.6.14-7
changelog:
  - Increase DH key bits to >= 2048 in self-tests (#1879506)
  - Implement self-tests for KDF and CMAC (#1890870)
  - Fix CVE-2020-24659: heap buffer-overflow when "no_renegotiation" alert is received (#1873959)


author: Hasitha Perera <hasitha.perera@asianux.com> - 3.6.14-7.0.1
changelog:
  - The certificates stored in tests/testpkcs11-certs expired on
  - 2020-12-13.  To avoid verification failure due to that, use datefudge
  - to set custom date when calling gnutls-cli, gnutls-serv, and certtool.
  - https://gitlab.com/gnutls/gnutls/-/commit/2b0f6f3a2ff13153aaa70c764ba7a8b90aef794d


author: Daiki Ueno <dueno@redhat.com> - 3.6.16-1
changelog:
  - Update to upstream 3.6.16 release (#1956783)
  - Fix potential use-after-free in key_share handling (#1927597)
  - Fix potential use-after-free in pre_shared_key handling (#1927593)
  - Stop gnutls-serv relying on AI_ADDRCONFIG to decide listening address (#1908334)
  - Fix cert expiration issue in tests (#1908110)


author: Zoltan Fridrich <zfridric@redhat.com> - 3.6.16-6
changelog:
  - Fix x86_64 CPU feature detection when AVX is not available (#2131152)
  - Fix timing side-channel in TLS RSA key exchange (#2162598)


author: Daiki Ueno <dueno@redhat.com> - 3.6.8-6
changelog:
  - Treat login error more gracefully when enumerating PKCS#11 tokens (#1705478)
  - Use deterministic ECDSA/DSA in FIPS selftests (#1716560)
  - Add gnutls_aead_cipher_{encrypt,decrypt}v2 functions (#1684461)


author: Daiki Ueno <dueno@redhat.com> - 3.6.8-9
changelog:
  - Fix CFB8 decryption when repeatedly called (#1757848)
  - Fix gnutls_aead_cipher_{en,de}cryptv2 with input not multiple of block size (#1757856)


author: Anderson Sasaki <ansasaki@redhat.com> - 3.6.5-3
changelog:
  - Fixed CVE-2019-3829 (#1693285)
  - Fixed CVE-2019-3836 (#1693288)
  - Added explicit BuildRequires for nettle-devel >= 3.4.1


author: Kalev Lember <klember@redhat.com> - 1.55.2-1
changelog:
  - Update to 1.55.2
  - Drop /usr/bin/env shebang patch as the brp scripts now handle this correctly
  - Remove ldconfig scriptlets


author: Tom Callaway <spot@fedoraproject.org> - 2.6.1-4
changelog:
  - add configure option to disable generic dynamic tls model
  - disable generic dynamic tls model on s390x and aarch64


author: Jiri Kucera <jkucera@redhat.com> - 1.13.1-2
changelog:
  - Remove *.pc files due to 'nothing provides pkgconfig(gpg-error)'
    and 'nothing provides pkgconfig(libassuan)' dnf errors
    Related: #1829822


author: Jiri Kucera <jkucera@redhat.com> - 1.13.1-8
changelog:
  - Add LICENSES file into the tarball, update License field
    Add pkgconfig files to gpgme-devel
    Resolves: #1882423, #1953905


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-98
changelog:
  - Fix another batch of CVEs
    Resolves: CVE-2020-14372
    Resolves: CVE-2020-25632
    Resolves: CVE-2020-25647
    Resolves: CVE-2020-27749
    Resolves: CVE-2020-27779
    Resolves: CVE-2021-20225
    Resolves: CVE-2021-20233


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-99
changelog:
  - Fix bug of grub2-install not checking for the SBAT option
    Resolves: CVE-2020-14372
    Resolves: CVE-2020-25632
    Resolves: CVE-2020-25647
    Resolves: CVE-2020-27749
    Resolves: CVE-2020-27779
    Resolves: CVE-2021-20225
    Resolves: CVE-2021-20233


author: Robbie Harwood <rharwood@redhat.com> - 2.06-123.el8_6.8
changelog:
  - CVE fixes for 2022-06-07
  - CVE-2022-28736 CVE-2022-28735 CVE-2022-28734 CVE-2022-28733
  - CVE-2021-3697 CVE-2021-3696 CVE-2021-3695
  - Resolves: #2031899


author: Robbie Harwood <rharwood@redhat.com> - 2.02-127
changelog:
  - ppc64le: CAS improvements, prefix detection, and vTPM support
  - Resolves: #2076795
  - Resolves: #2026568
  - Resolves: #2051331


author: Robbie Harwood <rharwood@redhat.com> - 2.02-137
changelog:
  - CVE fixes for 2022-06-07
  - CVE-2022-28736 CVE-2022-28735 CVE-2022-28734 CVE-2022-28733
  - CVE-2021-3697 CVE-2021-3696 CVE-2021-3695
  - Resolves: #2070687


author: Robbie Harwood <rharwood@redhat.com> - 2.02-143
changelog:
  - x86-efi: Fix an incorrect array size in kernel allocation
  - Also merge with 8.7
  - Resolves: #2031288


author: Andrew Lukoshko <alukoshko@almalinux.org> - 2.02-148.1.alma
changelog:
  - efi/http: change uint32_t to uintn_t for grub_efi_http_message_t
  - Resolves: #2178388
  - kern/ieee1275/init: sync vec5 patchset with upstream
  - Resolves: #2172111


author: Maito Yokoyama <maito.yokoyama@asianux.com> - 2.02-156.el8.ML.1
changelog:
  - Disable multiple certificates
  - Relpace the certificate and singing for ours.
  - Fix grub.rh version in sbat.csv


author: Leo Sandoval <lsandova@redhat.com> - 2.02-161
changelog:
  - Add Several CVE fixes
  - Resolves CVE-2024-45775 CVE-2025-0624
  - Resolves: #RHEL-75735
  - Resolves: #RHEL-79837


author: Nicolas Frayer <nfrayer@redhat.com> - 2.02-162
changelog:
  - ieee1275/ofnet: Fix grub_malloc() removed after added safe
  - Remove 'fs/ntfs: Implement attribute verification' patch
  - Related: #RHEL-79837


author: Leo Sandoval <lsandova@redhat.com> - 2.02-167
changelog:
  - 99-grub-mkconfig.install: fix condition allowing correct checks if GRUB_ENABLE_BLSCFG is not present
  - Resolves: #RHEL-80168


author: Peter Jones <pjones@redhat.com> - 2.02-70
changelog:
  - Fix (once again) how CFLAGS and LDFLAGS propogate the settings for hardened
    builds, because rpmdiff doesn't like the current way failing.
    Related: rhbz#1653961


author: Peter Jones <pjones@redhat.com> - 2.02-71
changelog:
  - Fix (a fourth time, due to a typo) how LDFLAGS works on non-efi platforms.
    Related: rhbz#1653961


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-80
changelog:
  - Fix PRIxGRUB_EFI_STATUS definition
    Related: rhbz#1761811
  - TPM: Print messages if measuraments fail as debug instead of error
    Resolves: rhbz#1761811
  - unix/platform: Initialize variable to fix grub-install on UEFI system
    Resolves: rhbz#1768689
  - blscfg: add a space char when appending fields for variable expansion
    Resolves: rhbz#1669252


author: Peter Jones <pjones@redhat.com> - 2.02-87
changelog:
  - Fix several CVEs
    Resolves: CVE-2020-10713
    Resolves: CVE-2020-14308
    Resolves: CVE-2020-14309
    Resolves: CVE-2020-14310
    Resolves: CVE-2020-14311


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-82
changelog:
  - Drop "Disable multiboot, multiboot2, and linux16 modules on EFI builds"
    Resolves: rhbz#1779480
  - efi/http: Export {fw,http}_path variables to make them global
    Resolves: rhbz#1811561
  - efi/http: Enclose literal IPv6 addresses in square brackets
  - efi/net: Allow to specify a port number in addresses
  - efi/ip4_config: Improve check to detect literal IPv6 addresses
  - efi/net: Print a debug message if parsing the address fails
    Resolves: rhbz#1811560
  - Set image base address before jumping to the PE/COFF entry point
    Resolves: rhbz#1819624


author: Peter Jones <pjones@redhat.com> - 2.02-86
changelog:
  - Couple more late fixes.
    Resolves: CVE-2020-10713
    Resolves: CVE-2020-14308
    Resolves: CVE-2020-14309
    Resolves: CVE-2020-14310
    Resolves: CVE-2020-14311


author: Jan Hlavac <jhlavac@redhat.com> - 2.02-92
changelog:
  - grub2-install: disable support for EFI platforms
    Resolves: rhbz#1737444
  - Include a few more modules to EFI build needed for LUKS support (javierm)
    Related: rhbz#1873725


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-93
changelog:
  - add keylayouts and at_keyboard modules to UEFI Grub2 (rmetrich)
    Related: rhbz#1897587
  - at_keyboard: use set 1 when keyboard is in Translate mode (rmetrich)
    Resolves: rhbz#1897587
  - add GRUB enhanced debugging features (rmetrich)
    Resolves: rhbz#1776249
  - ieee1275: Avoiding many unecessary open/close (diegodo)
    Resolves: rhbz#1862632
  - ieee1275: device mapper and fibre channel discovery support (diegodo)
    Resolves: rhbz#1873724


author: Javier Martinez Canillas <javierm@redhat.com> - 2.02-96
changelog:
  - Fix "Add 'at_keyboard_fallback_set' var to force the set manually"
    Related: rhbz#1897587
  - Fix a boot failure due patch "ieee1275: claim up to 256MB memory"
    Resolves: rhbz#1929111


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-29
changelog:
  - grubby-bls: print the absolute kernel and initramfs images paths
    Resolves: rhbz#1649778
  - grubby-bls: make info print the root parameter if is present in cmdline
    Resolves: rhbz#1649791


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-31
changelog:
  - grubby-bls: allow to specify the same kernel param multiple times
    Resolves: rhbz#1652486
  - grubby-bls: expand kernel options if these are environment variables
    Resolves: rhbz#1649785
  - grubby-bls: always generate the BLS snippets when adding new entries
    Resolves: rhbz#1653365
  - Improve man page for --info option (jstodola)
    Resolves: rhbz#1651672


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-37
changelog:
  - grubby-bls: unset default entry if is the one being removed
    Resolves: rhbz#1668329
  - grubby-bls: error if args or remove-args is used without update-kernel
    Related: rhbz#1690765
  - grubby-bls: make --update-kernel ALL to update kernelopts var in grubenv
    Resolves: rhbz#1690765
  - grubby-bls: fix --add-kernel not working when using the --args option
    Related: rhbz#1690765


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-38
changelog:
  - grubby-bls: don't print rpm-sort error messages
    Resolves: rhbz#1731924
  - grubby-bls: remove -o option and support -c for ppc64le grub config
    Resolves: rhbz#1758598
  - grubby-bls: fix logic to check if the kernelopts var is defined in a BLS
    Resolves: rhbz#1726514
  - grubby-bls: don't update grubenv when generating grub.cfg for ppc64le
    Related: rhbz#1726514


author: Javier Martinez Canillas <javierm@redhat.com> - 8.40-39
changelog:
  - grubby-bls: strip only /boot from paths
    Resolves: rhbz#1738238
  - Make grubby to also update GRUB_CMDLINE_LINUX in /etc/default/grub
    Resolves: rhbz#1152027
  - grubby-bls: fix corner case when a kernel param value contains a '='
    Resolves: rhbz#1787584
  - grubby-bls: update man page to match options in current wrapper script
    Resolves: rhbz#1812065
  - grubby-bls: always escape the delimiter character used in sed commands
    Related: rhbz#1787584
  - grubby-bls: add a --no-etc-grub-update option
    Related: rhbz#1152027


author: Jakub Martisko <jamartis@redhat.com> - 1.9-5
changelog:
  - Fix wrong skip size in gzexe
  - Add new test dealing with the ^^ (needs autoreconf)
  - Enable make check (needs less)
    Resolves: 1705413

   * Tue Aug 07 2018 Jakub Martisko <jamartis@redhat.com> - 1.9-4
   - Fix FTBFS bug (gnulib problems)
   - more details: https://lists.gnu.org/r/bug-gnulib/2018-03/msg00000.html
     Resolves 1611722


author: Francisco Javier Tsao Santín <tsao@gpul.org> - 1:1.3-1
changelog:
  - Patch by Todd Lewis that adds option -x to exclude files with pcre lib 
  - This patch solves RH Bugzilla ID's 955246 1322198


author: Tomasz Kłoczko <kloczek@fedoraproject.org> - 1:1.3-4
changelog:
  - remove manually added pcre2 requires (this is autogenerated)
  - removed BuildRoot, %defattr() and Group (new Fedora Packaging Guildline)
  - do not use straight gcc and add use %{__global_ldflags}
  - use %_licensedir is no longer needed
  - minor cleanups:
  -- reformat %description to 80 col
  -- added full URLs in Source fields
  -- more macros
  -- a bit simpler %prep


author: Michal Grzedzicki <mge@fb.com> - 9.54-4
changelog:
  - backport fix for --dco-identify real max sectors calculation from upstream version 9.62 (#1959918)


author: Michal Schmidt <mschmidt@redhat.com> - 1.11.8-3
changelog:
  - BuildRequire rdma-core-devel on s390(x).
  - Install the hwloc-dump-hwdata.service systemd service on x86/x86_64.


author: Michal Schmidt <mschmidt@redhat.com> - 1.11.9-1
changelog:
  - Update to 1.11.9.
  - BuildRequire gcc, gcc-c++. Drop Group tags.
  - BuildRequire numactl-devel on s390x too.


author: Jarod Wilson <jarod@redhat.com> 18.1-2
changelog:
  - Disable nes, mthca and ipath libibverbs providers, this
    old hardware is no longer supported, and fix disabling
    of cxgb3 and ocrdma


author: Jarod Wilson <jarod@redhat.com> - 19.1-1
changelog:
  - Update to v19.1 stable branch release
  - Fix SRQ support in libi40iw
  - Backport libqedr support for SRQ
  - Resolves: rhbz#1639692
  - Switch rxe_cfg from ifconfig to iproute2
  - Resolves: rhbz#1640637


author: Jarod Wilson <jarod@redhat.com> - 22-1
changelog:
  - Update to upstream v22 release for features and fixes
  - Include legacy ibdev2netdev helper script
  - Resolves: rhbz#1643904


author: Jarod Wilson <jarod@redhat.com> - 22.3-1
changelog:
  - Update to upstream v22.3 stable release for fixes
  - Enable support for Broadcom 57500 hardware
  - Enable support for Mellanox ConnectX-6 DX hardware
  - Resolves: rhbz#1678276
  - Resolves: rhbz#1687435


author: Jarod Wilson <jarod@redhat.com> - 26.0-2
changelog:
  - Add Obsoletes/Provides pair for infiniband-diags-devel
  - Pull in upstream stable-v26 branch patches
  - Fix %postun scriptlet failures by removing superfluous -p options
  - Add new BuildRequires: on pandoc
  - Related: rhbz#1722257


author: Honggang Li <honli@redhat.com> - 29.0-2
changelog:
  - Suppress ibdev2netdev warning messgae
  - Unversioned documentation directory
  - Resolves: bz1794904, bz1824853


author: Honggang Li <honli@redhat.com> - 32.0-1
changelog:
  - Update to upstream v32 release for features and fixes
  - Support Amazon Elastic Fabric Adapter
  - Enable pyverbs
  - Add a check for udevadm in the specfile
  - Resolves: bz1851721, bz1856076, bz1887396, bz1868804


author: Honggang Li <honli@redhat.com> - 32.0-4
changelog:
  - Update to upstream stable release v32.1
  - Fix mlx5 pyverbs CQ test
  - Resolves: bz1915745, bz1907377


author: Honggang Li <honli@redhat.com> - 37.1-1
changelog:
  - Update to upstream v37.1 release for features and fixes
  - Resolves: bz1982200, bz1990120, bz1982131


author: Kamal Heib <kheib@redhat.com> - 46.0-1
changelog:
  - Rebase to upstream release v46.0
  - Resolves: rhbz#2170066, rhbz#2209685, rhbz#2159635, rhbz#2167517


author: Mike FABIAN <mfabian@redhat.com> - 60.2-4
changelog:
  - Add negative-daylight-savings.patch from upstream.
    (see http://bugs.icu-project.org/trac/ticket/13566 and
    http://bugs.icu-project.org/trac/changeset/40954)


author: Parag Nemade <pnemade AT redhat DOT com> - 60.2-7
changelog:
  - Resolves:rh#1602551 - Fix specfile by adding compile options
  - also add BuildRequires for gcc and gcc-c++
  - Correct the upstream URL


author: Mike FABIAN <mfabian@redhat.com> - 60.3-1
changelog:
  - Update to 60.3 maintenance release including support for new Japanese era Reiwa (令和).
  - Resolves: rhbz#1677093


author: Mike FABIAN <mfabian@redhat.com> - 60.3-2
changelog:
  - Apply ICU-13634-Adding-integer-overflow-logic-to-ICU4C-num.patch
  - Apply ICU-20958-Prevent-SEGV_MAPERR-in-append.patch
  - Resolves: rhbz#1808238


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.0-2
changelog:
  - Adjusted docbook xsl path to match the correct stylesheet
  - Remove only *.la files, considering there aren't any *.a files


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.0-3
changelog:
  - Add OpenSSL 1.1 API support for the package, avoiding the need of
    compat-openssl10-devel package


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.1-1
changelog:
  - New upstream release
  - Support for OpenSSL 1.1 was added directly to the source code in upstream,
    thus removing specific patch for it
  - Docbook xsl stylesheet updated to a local path


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.1-2
changelog:
  - Remove libtool files
  - Run ldconfig scriptlets after un/installing
  - Add -devel subpackage to handle include files and examples
  - Disable any static file in the package


author: Bruno E. O. Meneguele <bmeneg@redhat.com> - 1.1-3
changelog:
  - Solve memory leaks pointed by covscan tool
  - Add optimization flag O2 during compilation to satisfy annocheck tool


author: Bruno E. O. Meneguele <brdeoliv@redhat.com> - 1.0-1
changelog:
  - New upstream release
  - Add OpenSSL 1.0 compatibility package, due to issues with OpenSSL 1.1
  - Remove libtool files
  - Run ldconfig after un/installation to update *.so files
  - Add -devel subpackage to handle include files and examples


author: Honggang Li <honli@redhat.com> - 1.6.7-5
changelog:
  - Update source URL
  - Disable support for ARM32
  - Disable support for s390 as rdma-core is unavailable for s390
  - Remove rdma-ndd as it had been merged into rdma-core
  - Resolves: bz1484155


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.4-2
changelog:
  - Fix broken reference following when the reference is split to
    more than one line
  - Fix possible incorrect selection of already loaded file when
    following cross reference
    Resolves: #1383057


author: Petr Pisar <ppisar@redhat.com> - 6.4-3
changelog:
  - perl dependency renamed to perl-interpreter
    <https://fedoraproject.org/wiki/Changes/perl_Package_to_Install_Core_Modules>


author: Jan Macku <jamacku@redhat.com> - 10.00.7-1
changelog:
  - Wait for scope link addresses as well as for scope global addresses
  - Remove deprecated option -m of pidof


author: Jan Macku <jamacku@redhat.com> - 10.00.8-1
changelog:
  - rwtab: Add support for chrony
  - ifup-eth: Switch to bc utility, which supports floating point computations.
  - Replace grep -EL with subshell since -L changed behaviour


author: Jan Macku <jamacku@redhat.com> - 10.00.10-1
changelog:
  - Allow updating rfkill switch status while in readonly root mode
  - service: Prevent variables from globbing
  - Allow updating mlocate.db while in readonly root mode


author: Jan Macku <jamacku@redhat.com> - 10.00.16-1
changelog:
  - rename_device: also support dracut-style kernel cmdline configuration
  - ifup-routes: Log when using `ip $type replace`
  - ifup-routes: Use `ip route repace` to avoid race


author: Jan Macku <jamacku@redhat.com> - 10.00.17-1
changelog:
  - ifup-routes: Revert quotes
  - ifup-routes: Use `ip replace` only on type `route`
  - ci: introduce GA ci from master to rhel8-branch
  - ci: Setup packit for RHEL8 branch
  - ci: Get rid of old ci files (travis and zanata)


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 9.80-1
changelog:
  - sysconfig/readonly-root: Clarify the usage of readonly-root
  - use proper shebang where appropriate
  - specfile: remove the systemctl call in the %postun phase
  - network-functions: use tr to upper case strings rather than awk
  - network-functions: add error messages for bonding installation
  - ifdown-eth: no longer needed 'pidof -x dhclient' condition removed
  - netconsole: LSB header added
  - po/xgettext_sh*: converted to use to python3
  - network.service: 'reload' removed
  - ifup-tunnel: Support 'external' tunnels
  - spec: add gcc to BuildRequires
  - init.d/functions: fix sourcing for ksh


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 9.81-1
changelog:
  - src/consoletype.c: deprecation warning added
  - src/genhostid.c: deprecation warning added
  - src/genhostid.c: fixed to not override /etc/hostid if it already exists
  - src/usleep.c: GCC warnings fixed
  - nis-domainname.service removed
  - fedora-* services renamed to more general names
  - specfile: missing fedora-domainname.service returned in systemd macros
  - COPYING updated to latest GNU version (GPLv2+)
  - network-scripts: control 'network' service with alternatives as well
  - netreport functionality dropped
  - networks moved into 'setup' package
  - lang.{sh,csh} moved into setup package
  - lang.{sh,csh} cleanup before moving to 'setup' package
  - src/sushell moved into 'policycoreutils' package
  - src/shvar.* removed
  - po/xgettext_sh removed
  - sys-unconfig removed
  - Outdated files from doc/ folder removed
  - make archive: ChangeLog generating removed
  - network-scripts: ifup & ifdown -- use alternatives system
  - adjtime moved into 'util-linux' package
  - specfile: simplified & updated to new repository layout
  - .gitignore files updated to new repository layout
  - Makefile simplified & updated to new repository layout
  - po/Makefile simplified & updated to new repository layout
  - src/Makefile simplified & updated to new repository layout
  - Repository scheme updated to new layout
  - fedora-readonly: command substitution warning fixed (null-byte input)


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 9.82-1
changelog:
  - Makefile: make the creation of symlinks relative to path again
  - specfile: trailing file of netreport removed


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 9.83-1
changelog:
  - network-scripts: Add previously dropped error checking
  - network-scripts: Replace brctl with ip-link
  - Makefile: new release-commit rule added
  - src/rename_device.c: GCC warnings about unused return value suppressed
  - src/usernetctl.c: GCC warnings about unused return value suppressed
  - Makefile: allow sub-makefiles to run in parallel
  - specfile: netconsole service moved to /usr/libexec
  - specfile: services from /usr/lib/systemd moved to /usr/libexec
  - specfile: summary & description updated
  - specfile: no longer needed conflicts dropped
  - specfile: requirements cleanup
  - specfile: obsoletes on previous version of initscripts package added
  - specfile: network-scripts subpackage created
  - specfile: readonly-root subpackage created
  - specfile: netconsole-service subpackage created
  - README.md: Travis CI build icon added
  - .travis.yml: check the 'make install' proceeds as well
  - .travis.yml: initial commit
  - README.md: bug reporting described
  - README.dm: future of initscripts described
  - README.md: description added
  - README.md: references to old git branches added
  - README.md: initial commit
  - network-scripts: setting of firewall ZONE fixed
  - ifdown-post: artifact whitespace removed from the DBus call
  - l10n: drop .tx directory
  - l10n: add zanata.xml


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 10.00-1
changelog:
  - Move the /etc/rwtab.d & /etc/statetab.d folders to 'filesystem'
  - specfile: fix failing build because of incorrect use of (x86-64)


author: David Kaspar [Dee'Kej] <dkaspar@redhat.com> - 10.00.1-1
changelog:
  - consoletype/genhostid/usleep: allow disabling of deprecation warnings
  - network/ifup/ifdown: allow disabling of deprecation warnings
  - network/ifup/ifdown: deprecation warnings for 'network-scripts' added


author: Jan Macku <jamacku@redhat.com> - 10.00.3-1
changelog:
  - rc.d/functions: fix escape sequence being output under systemd service units
  - Replace not working awk command with sed


author: Jan Macku <jamacku@redhat.com> - 10.00.5-1
changelog:
  - network-function: bridges are created by ifup-eth
  - network: don't fail with IFDOWN_ON_SHUTDOWN
  - Add ip6gre tunnel option
  - ifup-eth: Check that device name is set
  - Initscripts no longer care about rc.local


author: Charalampos Stratakis <cstratak@redhat.com> - 0.6-10
changelog:
  - SPEC file cleanup
  - Added licence tag
  - Removal of old and unneeded macros
  - Use of newest python macros
  - Removed Python 2 dependency
  - Added patch for Python 3 build


author: Phil Sutter <psutter@redhat.com> [4.18.0-6.el8]
changelog:
  - Update kernel headers (Phil Sutter) [1637440]
  - tc_util: Add support for showing TCA_STATS_BASIC_HW statistics (Phil Sutter) [1637440]
  - tc: Remove pointless assignments in batch() (Phil Sutter) [1602555]
  - tipc: Drop unused variable 'genl' (Phil Sutter) [1602555]
  - ip-route: Fix parse_encap_seg6() srh parsing (Phil Sutter) [1602555]
  - rdma: Don't pass garbage to rd_check_is_filtered() (Phil Sutter) [1602555]
  - ip-route: Fix for memleak in error path (Phil Sutter) [1602555]
  - rdma: Fix for ineffective check in add_filter() (Phil Sutter) [1602555]
  - devlink: Fix error reporting in cmd_resource_set() (Phil Sutter) [1602555]
  - libnetlink: fix use-after-free of message buf (Phil Sutter) [1602555]
  - libnetlink: don't return error on success (Phil Sutter) [1602555]
  - libnetlink: fix leak and using unused memory on error (Phil Sutter) [1602555]
  - tc: htb: Print default value in hex (Phil Sutter) [1641053]


author: Phil Sutter <psutter@redhat.com> [4.18.0-7.el8]
changelog:
  - ip-route: Fix nexthop encap parsing (Phil Sutter) [1625358]
  - man: ip-route.8: Document nexthop limit (Phil Sutter) [1625358]


author: Phil Sutter <psutter@redhat.com> [4.18.0-11.el8]
changelog:
  - tc: m_tunnel_key: Add tunnel option support to act_tunnel_key (Phil Sutter) [1654761]
  - tc: f_flower: add geneve option match support to flower (Phil Sutter) [1654761]
  - l2tp: Fix printing of cookie and peer_cookie values (Phil Sutter) [1643805]


author: Andrea Claudi <aclaudi@redhat.com> [4.18.0-12.el8]
changelog:
  - devlink: Add param command support (Andrea Claudi) [1663199]
  - rdma: Fix representation of PortInfo CapabilityMask (Andrea Claudi) [1664694]
  - uapi: update ib_verbs (Andrea Claudi) [1664694]
  - tc: flower: Add support for QinQ (Andrea Claudi) [1615928]
  - ip rule: Add ipproto and port range to filter list (Andrea Claudi) [1678111]


author: Andrea Claudi <aclaudi@redhat.com> [4.18.0-13.el8]
changelog:
  - ip-xfrm: Respect family in deleteall and list commands (Andrea Claudi) [1656717]
  - Update kernel headers (Andrea Claudi) [1716361]
  - uapi: update bpf header (Andrea Claudi) [1716361]
  - uapi: update headers to 4.20-rc1 (Andrea Claudi) [1716361]
  - bpf: add btf func and func_proto kind support (Andrea Claudi) [1716361]
  - lib/bpf: fix build warning if no elf (Andrea Claudi) [1716361]
  - bpf: initialise map symbol before retrieving and comparing its type (Andrea Claudi) [1716361]
  - Include bsd/string.h only in include/utils.h (Andrea Claudi) [1716361]
  - Use libbsd for strlcpy if available (Andrea Claudi) [1716361]
  - bpf: check map symbol type properly with newer llvm compiler (Andrea Claudi) [1716361]
  - bpf: implement btf handling and map annotation (Andrea Claudi) [1716361]
  - bpf: implement bpf to bpf calls support (Andrea Claudi) [1716361]
  - bpf: remove strict dependency on af_alg (Andrea Claudi) [1716361]
  - bpf: move bpf_elf_map fixup notification under verbose (Andrea Claudi) [1716361]
  - iplink: add support for reporting multiple XDP programs (Andrea Claudi) [1716361]
  - rdma: Document IB device renaming option (Andrea Claudi) [1663228]
  - rdma: Add an option to rename IB device interface (Andrea Claudi) [1663228]
  - rdma: Introduce command execution helper with required device name (Andrea Claudi) [1663228]
  - rdma: Update kernel include file to support IB device renaming (Andrea Claudi) [1663228]
  - libnetlink: Convert GETADDR dumps to use rtnl_addrdump_req (Andrea Claudi) [1716772]


author: Andrea Claudi <aclaudi@redhat.com> [4.18.0-15.el8]
changelog:
  - netns: make netns_{save,restore} static (Andrea Claudi) [1719759]
  - ip vrf: use hook to change VRF in the child (Andrea Claudi) [1719759]
  - netns: switch netns in the child when executing commands (Andrea Claudi) [1719759]
  - m_mirred: don't bail if the control action is missing (Andrea Claudi) [1711760]
  - tc: introduce support for chain templates (Andrea Claudi) [1710291]
  - ip: reset netns after each command in batch mode (Andrea Claudi) [1671016]


author: Andrea Claudi <aclaudi@redhat.com> [5.3.0-5.el8]
changelog:
  - man: tc-ct.8: Add manual page for ct tc action (Andrea Claudi) [1844637]
  - tc: flower: Add matching on conntrack info (Andrea Claudi) [1844637]
  - tc: Introduce tc ct action (Andrea Claudi) [1844637]
  - tc: add NLA_F_NESTED flag to all actions options nested block (Andrea Claudi) [1844637]
  - Import tc_act/tc_ct.h uapi file (Andrea Claudi) [1844637]
  - ss: allow dumping kTLS info (Andrea Claudi) [1812207]
  - devlink: Add health error recovery status monitoring (Andrea Claudi) [1821039]


author: Andrea Claudi <aclaudi@redhat.com> [5.9.0-2.el8]
changelog:
  - tc: flower: fix json output with mpls lse (Andrea Claudi) [1885770]
  - tc-mpls: fix manpage example and help message string (Andrea Claudi) [1885770]
  - tc-vlan: fix help and error message strings (Andrea Claudi) [1885770]
  - m_mpls: test the 'mac_push' action after 'modify' (Andrea Claudi) [1885770]
  - m_mpls: add mac_push action (Andrea Claudi) [1885770]
  - m_vlan: add pop_eth and push_eth actions (Andrea Claudi) [1885770]
  - Update kernel headers (Andrea Claudi) [1885770]


author: Andrea Claudi <aclaudi@redhat.com> [5.12.0-1.el8]
changelog:
  - tc: f_flower: Add missing ct_state flags to usage description (Andrea Claudi) [1957243]
  - tc: f_flower: Add option to match on related ct state (Andrea Claudi) [1957243]


author: Andrea Claudi <aclaudi@redhat.com> [5.12.0-3.el8]
changelog:
  - tc: htb: improve burst error messages (Andrea Claudi) [1910745]
  - tc: u32: Fix key folding in sample option (Andrea Claudi) [1979425]
  - police: Fix normal output back to what it was (Andrea Claudi) [1981393]
  - police: Add support for json output (Andrea Claudi) [1981393]
  - police: add support for packet-per-second rate limiting (Andrea Claudi) [1981393]
  - Update kernel headers (Andrea Claudi) [1981393]
  - mptcp: add support for port based endpoint (Andrea Claudi) [1984733]


author: Andrea Claudi <aclaudi@redhat.com> - 5.15.0-2.el8
changelog:
  - vdpa: Enable user to set mtu of the vdpa device (Andrea Claudi) [2036880]
  - vdpa: Enable user to set mac address of vdpa device (Andrea Claudi) [2036880]
  - vdpa: Enable user to query vdpa device config layout (Andrea Claudi) [2036880]
  - vdpa: align uapi headers (Andrea Claudi) [2036880]


author: Andrea Claudi <aclaudi@redhat.com> - 5.15.0-3.el8
changelog:
  - tc: u32: add json support in `print_raw`, `print_ipv4`, `print_ipv6` (Andrea Claudi) [1989591]
  - tc: u32: add support for json output (Andrea Claudi) [1989591]


author: Andrea Claudi <aclaudi@redhat.com> - 5.15.0-4.el8
changelog:
  - vdpa: Update man page with added support to configure max vq pair (Andrea Claudi) [2056827]
  - vdpa: Support reading device features (Andrea Claudi) [2056827]
  - vdpa: Support for configuring max VQ pairs for a device (Andrea Claudi) [2056827]
  - vdpa: Allow for printing negotiated features of a device (Andrea Claudi) [2056827]
  - vdpa: Remove unsupported command line option (Andrea Claudi) [2056827]
  - uapi: update vdpa.h (Andrea Claudi) [2056827]
  - Update kernel headers and import virtio_net (Andrea Claudi) [2056827]


author: Andrea Claudi <aclaudi@redhat.com> - 5.18.0-1.1.el8
changelog:
  - macvlan: Add bclim parameter (Andrea Claudi) [2209687]
  - Update kernel headers (Andrea Claudi) [2209687]


author: Andrea Claudi <aclaudi@redhat.com> [5.3.0-2.el8]
changelog:
  - man: ip.8: Add missing vrf subcommand description (Andrea Claudi) [1780010]
  - xfrm: not try to delete ipcomp states when using deleteall (Andrea Claudi) [1808634]
  - ip-xfrm: Fix help messages (Andrea Claudi) [1796045]
  - man: rdma.8: Add missing resource subcommand description (Andrea Claudi) [1786576]
  - man: rdma-statistic: Add filter description (Andrea Claudi) [1786565]
  - tc: implement support for action flags (Andrea Claudi) [1770671]
  - Update kernel headers (Andrea Claudi) [1770671]
  - Update kernel headers (Andrea Claudi) [1770671]


author: Andrea Claudi <aclaudi@redhat.com> [5.3.0-3.el8]
changelog:
  - xfrm: also check for ipv6 state in xfrm_state_keep (Andrea Claudi) [1828033]
  - man: bridge.8: fix bridge link show description (Andrea Claudi) [1817571]
  - ip: fix ip route show json output for multipath nexthops (Andrea Claudi) [1738633]
  - ip link: xstats: fix TX IGMP reports string (Andrea Claudi) [1796041]
  - nstat: print useful error messages in abort() cases (Andrea Claudi) [1824896]


author: Andrea Claudi <aclaudi@redhat.com> [5.3.0-4.el8]
changelog:
  - tc: f_flower: add options support for erspan (Andrea Claudi) [1830485]
  - tc: f_flower: add options support for vxlan (Andrea Claudi) [1830485]
  - tc: m_tunnel_key: add options support for erpsan (Andrea Claudi) [1830485]
  - tc: m_tunnel_key: add options support for vxlan (Andrea Claudi) [1830485]
  - iproute_lwtunnel: add options support for erspan metadata (Andrea Claudi) [1830485]
  - iproute_lwtunnel: add options support for vxlan metadata (Andrea Claudi) [1830485]
  - iproute_lwtunnel: add options support for geneve metadata (Andrea Claudi) [1830485]
  - Update kernel headers (Andrea Claudi) [1830485]
  - man: ip.8: add reference to mptcp man-page (Andrea Claudi) [1812207]
  - man: mptcp man page (Andrea Claudi) [1812207]
  - ss: allow dumping MPTCP subflow information (Andrea Claudi) [1812207]
  - Update kernel headers (Andrea Claudi) [1812207]
  - Update kernel headers (Andrea Claudi) [1812207]
  - add support for mptcp netlink interface (Andrea Claudi) [1812207]
  - Update kernel headers and import mptcp.h (Andrea Claudi) [1812207]
  - ip: xfrm: add espintcp encapsulation (Andrea Claudi) [1844045]
  - Update kernel headers and import udp.h (Andrea Claudi) [1844045]


author: Andrea Claudi <aclaudi@redhat.com> - 6.2.0-2.el8
changelog:
  - macvlan: Add bclim parameter (Andrea Claudi) [2188134]
  - Update kernel headers (Andrea Claudi) [2188134]


author: Andrea Claudi <aclaudi@redhat.com> - 6.2.0-4.el8
changelog:
  - ip vrf: make ipvrf_exec SELinux-aware (Andrea Claudi) [1780023]
  - lib: add SELinux include and stub functions (Andrea Claudi) [1780023]
  - ss: make SELinux stub functions conformant to API definitions (Andrea Claudi) [1780023]
  - ss: make is_selinux_enabled stub work like in SELinux (Andrea Claudi) [1780023]


author: Stefano Brivio <sbrivio@redhat.com> - 6.38-3
changelog:
  - Fix loading of sets with dependencies on other sets (RHBZ#1647096), and
    hardcode 6.38-1.el7 for ipset-service upgrade and downgrade triggers, so that
    we don't run into issues with z-stream updates


author: Stefano Brivio <sbrivio@redhat.com> - 7.1-1
changelog:
  - Rebase to 7.1 (RHBZ#1649090):
    - Add compatibility support for strscpy()
    - Correct the manpage about the sort option
    - Add missing functions to libipset.map
    - configure.ac: Fix build regression on RHEL/CentOS/SL (Serhey Popovych)
    - Implement sorting for hash types in the ipset tool
    - Fix to list/save into file specified by option (reported by Isaac Good)
    - Introduction of new commands and protocol version 7, updated kernel include files
    - Add compatibility support for async in pernet_operations
    - Use more robust awk patterns to check for backward compatibility
    - Prepare the ipset tool to handle multiple protocol version
    - Fix warning message handlin
    - Correct to test null valued entry in hash:net6,port,net6 test
    - Library reworked to support embedding ipset completely
    - Add compatibility to support kvcalloc()
    - Validate string type attributes in attr2data() (Stefano Brivio)
    - manpage: Add comment about matching on destination MAC address (Stefano Brivio)
      (RHBZ#1649079)
    - Add compatibility to support is_zero_ether_addr()
    - Fix use-after-free in ipset_parse_name_compat() (Stefano Brivio) (RHBZ#1649085)
    - Fix leak in build_argv() on line parsing error (Stefano Brivio) (RHBZ#1649085)
    - Simplify return statement in ipset_mnl_query() (Stefano Brivio) (RHBZ#1649085)
    - tests/check_klog.sh: Try dmesg too, don't let shell terminate script (Stefano Brivio) 
  - Fixes:
    - Fix all shellcheck warnings in init script (RHBZ#1649085)
    - Make error reporting consistent, introduce different severities (RHBZ#1683711)
    - While restoring, on invalid entries, remove them and retry (RHBZ#1683713)
    - Fix covscan SC2166 warning in init script (RHBZ#1649085)


author: Phil Sutter <psutter@redhat.com> - 1.8.2-10
changelog:
  - arptables-nft: fix decoding of hlen on bigendian platforms
  - xtables-save: Fix table not found error message
  - xtables: Catch errors when zeroing rule rounters
  - extensions: TRACE: Point at xtables-monitor in documentation
  - extensions: libipt_realm: Document allowed realm values


author: Phil Sutter <psutter@redhat.com> - 1.8.2-12
changelog:
  - Add iptables-test.py testsuite to sources
  - extensions: libip6t_mh: fix bogus translation error
  - extensions: AUDIT: Document ineffective --type option
  - xtables-restore: Fix program names in help texts
  - xtables-save: Point at existing man page in help text
  - utils: Add a manpage for nfbpf_compile
  - Mark man pages in base package as documentation files


author: Phil Sutter <psutter@redhat.com> - 1.8.2-14
changelog:
  - arptables: Print space before comma and counters
  - extensions: Fix ipvs vproto parsing
  - extensions: Fix ipvs vproto option printing
  - extensions: Add testcase for libxt_ipvs


author: Phil Sutter <psutter@redhat.com> - 1.8.4-3
changelog:
  - Reduce globbing in library file names to expose future SONAME changes
  - Add bootstrapping for libip*tc SONAME bump


author: Phil Sutter <psutter@redhat.com> - 1.8.4-8
changelog:
  - xtables-translate: Fix for iface++
  - tests: shell: Fix skip checks with --host mode
  - xtables-restore: fix for --noflush and empty lines


author: Phil Sutter <psutter@redhat.com> - 1.8.4-11
changelog:
  - Complete ebtables-nft among match support
  - Replace RHEL-only xtables-monitor fix with upstream solution
  - xtables: Align effect of -4/-6 options with legacy
  - xtables: Drop -4 and -6 support from xtables-{save,restore}
  - Review systemd unit files


author: Phil Sutter <psutter@redhat.com> - 1.8.4-16
changelog:
  - tests/shell: Add test for bitwise avoidance fixes
  - ebtables: Optimize masked MAC address matches
  - nft: Optimize class-based IP prefix matches
  - nft: Fix for broken address mask match detection
  - nft: cache: Make nft_rebuild_cache() respect fake cache
  - tests: shell: Improve concurrent noflush restore test a bit
  - nft: Fix for concurrent noflush restore calls
  - nft: Fix error reporting for refreshed transactions
  - nft: Make batch_add_chain() return the added batch object


author: Phil Sutter <psutter@redhat.com> - 1.8.4-17
changelog:
  - extensions: dccp: Fix for DCCP type 'INVALID'
  - tests: shell: Merge and extend return codes test
  - nft: Fix command name in ip6tables error message
  - extensions: libxt_CT: add translation for NOTRACK
  - extensions: libipt_icmp: Fix translation of type 'any'
  - tests/shell: Test for fixed extension registration
  - libxtables: Register multiple extensions in ascending order
  - libxtables: Simplify pending extension registration
  - libxtables: Make sure extensions register in revision order


author: Phil Sutter <psutter@redhat.com> - 1.8.4-18
changelog:
  - xtables-translate: Fix translation of odd netmasks
  - nft: Fix bitwise expression avoidance detection
  - xtables-monitor: 'LL=0x304' is not very convenient, print LOOPBACK instead.
  - xtables-monitor: print packet first
  - xtables-monitor: fix packet family protocol
  - xtables-monitor: fix rule printing
  - xtables-monitor: Fix ip6tables rule printing


author: Phil Sutter <psutter@redhat.com> - 1.8.4-20
changelog:
  - extensions: SECMARK: Use a better context in test case
  - extensions: sctp: Translate --chunk-types option
  - extensions: sctp: Fix nftables translation
  - extensions: SECMARK: Implement revision 1
  - nft: cache: Retry if kernel returns EINTR


author: Phil Sutter <psutter@redhat.com> - 1.8.4-21
changelog:
  - extensions: hashlimit: Fix tests with HZ=100
  - ebtables: Dump atomic waste
  - doc: ebtables-nft.8: Adjust for missing atomic-options


author: Phil Sutter <psutter@redhat.com> - 1.8.4-23
changelog:
  - libxtables: Fix unsupported extension warning corner case
  - tests: shell: Check overhead in iptables-save and -restore
  - nft: Fix EPERM handling for extensions without rev 0
  - Improve error messages for unsupported extensions
  - xshared: Fix response to unprivileged users
  - libxtables: Register only the highest revision extension
  - Use proto_to_name() from xshared in more places
  - libxtables: Boost rule target checks by announcing chain names
  - libxtables: Implement notargets hash table
  - nft: Reject standard targets as chain names when restoring
  - xshared: Merge and share parse_chain()
  - xshared: Prefer xtables_chain_protos lookup over getprotoent
  - nft: Speed up immediate parsing
  - nft: Simplify immediate parsing


author: Phil Sutter <psutter@redhat.com> - 1.8.5-1
changelog:
  - Rebase to version 1.8.5 plus upstream-indicated fixes
  - Fix for duplicate files in RPM due to imprecise globbing
  - Drop bootstrap code again


author: Phil Sutter <psutter@redhat.com> - 1.8.5-11
changelog:
  - iptables-restore: Drop dead code
  - iptables-apply: Eliminate shellcheck warnings
  - ebtables: Exit gracefully on invalid table names


author: Phil Cameron <pcameron@redhat.com> - 1.1.4-16
changelog:
  - Moved upstream from https://fedorahosted.org/iptraf-ng/ to 
    https://github.com/iptraf-ng/iptraf-ng/ with release v1.1.4
    Fixes error in patch Patch03 - this fixes 1283773


author: Thomas Woerner <twoerner@redhat.com> 2.2.6-1
changelog:
  - New upstream version 2.2.6
    - Located at github
    - Fixes (RHBZ#1294913 and RHBZ#1375395)
  - Additional upstream patch (no_debug) to drop some debugging remains
  - Additional proposed patch to fix segmentation fault with -1 -C (RHBZ#599181)


author: Kairui Song <kasong@redhat.com> 2:1.4.0-2
changelog:
  - Fix several memleak problems found by covscan (bz1606969)
  - Fix an possible overflow error (bz1606969)
  - Don't leak socket fd on connection error (bz1606969)
  - Check xen-dyn-event more flexible (bz1576164)


author: Kairui Song <kasong@redhat.com> 2:1.4.0-3
changelog:
  - Update document and remove dead options to fix manpage scan warning (bz1612706)
  - Fix gating test error (bz1680619)


author: Chris Leech <cleech@redhat.com> - 6.2.0.876-1.git4ef9261
changelog:
  - pull in post 2.0.876 tagged fixes from upstream git
  - minimal packaging of libopeniscsiusr (internal use only, no dev package yet)


author: Chris Leech <cleech@redhat.com> - 6.2.0.876-5.gitf3c8e90
changelog:
  - iscsiuio: add mutex to protect netlink buffer for pass-through xmit
  - iscsid: get gateway information from sysfs when recovering sessions
  - enabled MaxOustandingR2T negotiation during login


author: Chris Leech <cleech@redhat.com> - 6.2.0.878-0.gitd791ce0
changelog:
  - 1761940 iSCSI CHAP authentication not function with FIPS enabled
  - Service file improvements forward ported from RHEL 7.8
  - various static analysis fixes from upstream


author: Chris Leech - 6.2.0.878-5.gitd791ce0
changelog:
  - 1849931, 1869438 go back to MD5 CHAP only by default
    new CHAP modes can cause issue with some targets,
    so SHA1/SHA256/SHA3-256 modes must be configured to enable now


author: Chris Leech <cleech@redhat.com> - 0.94-1
changelog:
  - new upstream location, update to 0.94
  - new devel package, upstream open-iscsi is dropping it's internal copy


author: Herton R. Krzesinski <herton@redhat.com> - 20190516-94.git711d3297
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update iwlwifi firmware to support the Cyclone Peak Dual Band 2x2 802.11ax (rhbz 1622442)
  - Pull new version of Netronome firmware (rhbz 1663989)
  - Update firmware for Chelsio T4/T5/T6 adapters (rhbz 1664678)
  - Update Netronome firmware that include bug fixes (rhbz 1673890)
  - Include firmware support for Intel Bluetooth 22261 (rhbz 1678095)


author: Bruno Meneguele <bmeneg@redhat.com> - 20191202-95.gite8a0f4c9
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update qed zipped/unzipped firmware to latest upstream (rhbz 1720394)
  - Update bnx2x firmware to latest upstream (rhbz 1720395)
  - AX200(Cyclone Peak 2 or CcP2) Bluetooth support (rhbz 1722693)
  - Firmware for Chelsio T4/T5/T6 adapters (rhbz 1725821)
  - Include to support Intel AX201 Harrison Peak(CNVi) on CML-U (rhbz 1725873)
  - Icelake Bluetooth firmware update (AX201, Harrison Peak, or HrP2) (rhbz 1726182)
  - DDP Package to support Columbiaville NIC (rhbz 1726454)
  - Add iwlwifi-cc-a0-48.ucode to linux-firmware (rhbz 1753962)
  - Change install section to use usptream installation process


author: Frantisek Hrbata <fhrbata@redhat.com> - 20200512-98.gitb2cad6a2
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update qed zipped/unzipped firmware to latest upstream (rhbz 1791030)
  - Update bnx2x firmware to latest upstream (rhbz 1791031)
  - Firmware - nvidia: add TU102/TU104/TU106 / TU116/117 signed firmware (rhbz 1801025)
  - Update latest Signed FW for AMD NAVI 10 Graphic (rhbz 1809846)


author: Frantisek Hrbata <fhrbata@redhat.com> - 20200619-100.git3890db36
changelog:
  - ice: Update to the Default OS DDP Package for ice driver (rhbz 1896597)
  - ice: Pull Comms Market Segment Package into RHEL 8.3 (rhbz 1896598)


author: Jan Stancek <jstancek@redhat.com> - 20201022-100.gitdae4b4cd
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - ice: Pull Comms Market Segment Package (rhbz 1861491)
  - ice: Update to the Default OS DDP Package for ice driver (rhbz 1879278)


author: Jan Stancek <jstancek@redhat.com> - 20201118-101.git7455a360
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include to support Intel AX210 Typhoon Peak - Bluetooth firmware support (rhbz 1897069)
  - Include support for the Qualcomm AX500-DBS (QCA6390) 802.11ax Wireless - firmware support (rhbz 1725913)


author: Bruno Meneguele <bmeneg@redhat.com> - 20210702-103.gitd79c2677
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include support for the Qualcomm AX500-DBS (QCA6390) 802.11ax Wireless (rhbz 1725913)
  - Firmware for Chelsio T4/T5/T6 adapters (rhbz 1961398)
  - Incorrect NVIDIA GPU firmware used for TU102 and TU104 GPUs (rhbz 1965312)
  - Package the new iwl7260 ucode files and also the new binary format PNVM


author: Bruno Meneguele <bmeneg@redhat.com> - 20210702-104.gitd79c2677
changelog:
  - Certain amdgpu firmware files cause random hangs with AMD Picasso / Raven Ridge APUs (rhbz 2018309)


author: Bruno Meneguele <bmeneg@redhat.com> - 20211007-104.git7a300505
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Certain amdgpu firmware files cause random hangs with AMD Picasso/Raven Ridge APUs (rhbz 2000879)
  - Support Intel CNVi AX211 Garfield Peak2 on ADL - Bluetooth (rhbz 1923179)
  - Support Intel CNVi AX211 Garfield Peak2 on ADL - WIFI (rhbz 1923175)


author: Bruno Meneguele <bmeneg@redhat.com> - 20211119-105.gitf5d51956
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update to latest AMD GPU firmware (rhbz 1986660)


author: Augusto Caringi <acaringi@redhat.com> - 20220209-106.git6342082c
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include AMD GPU firmware fix (rhbz 2031172)
  - Support QCA WCN6856 v2.1 Module: Bluetooth firmware (rhbz 2007904)


author: Jarod Wilson <jarod@redhat.com> - 20220517-107.git251d2900
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include latest qed firmware update (rhbz 2040269)
  - Include latest bnx2x firmware update (rhbz 2040273)
  - Include latest ice firmware update (rhbz 2059384, rhbz 2081543)
  - Include latest Qualcomm firmware update (rhbz 2062871)


author: Jarod Wilson <jarod@redhat.com> - 20220713-109.gitdfa29317
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include even newer qed firmware update (rhbz 2040269)


author: Jarod Wilson <jarod@redhat.com> - 20220726-110.git150864a4
changelog:
  - Omit unused password-protected vxge firmware files from package (rhbz 2108051)
  - Pick up latest AMD GPU firmwares


author: Lucas Zampieri <lzampier@redhat.com> - 20221102-111.git8bb75626
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - amdgpu firmware update to fix certain "multiple monitor scenarios" (rhbz 2130707)


author: Lucas Zampieri <lzampier@redhat.com> - 20230111-112.gita1ad1d5b
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Navi33 dGPU firmware (rhbz 2047480)
  - Navi31 dGPU firmware (rhbz 2047483)


author: Lucas Zampieri <lzampier@redhat.com> - 20230217-113.git83f1d778
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Qualcomm Wi-Fi - Disconnecting power cable during suspend wakes up the laptop (rhbz 2169012)


author: Patrick Talbert <ptalbert@redhat.com> - 20230404-114.git2e92a49f
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Intel QAT Update - firmware for QAT (rhbz 2030316)


author: Denys Vlasenko <dvlasenk@redhat.com> - 20230515-115.gitd1962891
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - [RHEL8] Add latest NVIDIA signed firmware for Turing GPUs and later
  Resolves: rhbz#2183606


author: Denys Vlasenko <dvlasenk@redhat.com> - 20230711-116.gitd3f66064
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - AMD GPU firmware update: fix PSR-SU issues with kernel 6.2 or later
  Resolves: rhbz#2218670


author: Denys Vlasenko <dvlasenk@redhat.com> - 20230808-117.git0ab353f8
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Navi32 dGPU firmware
  - Update to fix multi monitor behind TBT3 dock & random flickers
  - AMD Zen2 firmware update for cross-process information leak
  Resolves: rhbz#2047482, rhbz#2227846, rhbz#2227153


author: Denys Vlasenko <dvlasenk@redhat.com> - 20230824-118.git0e048b06
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - AMD Zen3 and Zen4 firmware update for return address predictor velunerability
  Resolves: rhbz#2230415


author: Patrick Talbert <ptalbert@redhat.com> - 20230824-120.git0e048b06
changelog:
  - Move amd-ucode README to docs directory due to dracut issue (RHEL-16800)
  - Update AMD cpu microcode from upstream 06afd7f939c5 (RHEL-16783)
  - Update amd-ucode/README from upstream d252e92d50c0 (RHEL-16783)
  - Revert 'Exclude AMD cpu ucode for fam19/*cpuid_0x00aa0f0*'
  Resolves: RHEL-16783, RHEL-16800


author: Denys Vlasenko <dvlasenk@redhat.com> - 20231121-119.git9552083a
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Update AMD cpu microcode
  - hw: intel: Fix protection mechanism failure for some Intel(R) PROSet/Wireless WiFi
  Resolves: RHEL-16721, RHEL-14260


author: Denys Vlasenko <dvlasenk@redhat.com> - 20231121-120.git9552083a
changelog:
  - Work around absense of rdfind during build
  - Add file directives for new iwlwifi files
  Resolves: RHEL-16721, RHEL-14260


author: Denys Vlasenko <dvlasenk@redhat.com> - 20240111-121.gitb3132c18
changelog:
  - Pass --ignore-duplicates to copy-firmware.sh
  - AMD Zen3 and Zen4: fix for INVD instruction causing loss of SEV-ES guest machine memory integrity
  Resolves: RHEL-13982


author: Denys Vlasenko <dvlasenk@redhat.com> - 20240610-122.git90df68d2
changelog:
  - [Intel 8.10 FEAT] [SPR][EMR] QAT firmware update available (RHEL-15607)
  - CVE-2023-31346 AMD SEV: Reserved fields in guest message responses may not be zero initialized [rhel-8.10.0] (RHEL-35596)
  - amd-ucode early loading broken [rhel-8] (RHEL-16799)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - linux-firmware: Add firmware for Lenovo Thinkbooks
  - amdgpu: update yellow carp firmware
  - amdgpu: update VCN 4.0.4 firmware
  - amdgpu: update SDMA 6.0.2 firmware
  - amdgpu: update PSP 13.0.7 firmware
  - amdgpu: update GC 11.0.2 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update raven2 firmware
  - amdgpu: update raven firmware
  - amdgpu: update SMU 13.0.10 firmware
  - amdgpu: update SDMA 6.0.3 firmware
  - amdgpu: update PSP 13.0.10 firmware
  - amdgpu: update GC 11.0.3 firmware
  - amdgpu: update VCN 3.1.2 firmware
  - amdgpu: update PSP 13.0.5 firmware
  - amdgpu: update psp 13.0.8 firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update VCN 4.0.0 firmware
  - amdgpu: update smu 13.0.0 firmware
  - amdgpu: update SDMA 6.0.0 firmware
  - amdgpu: update PSP 13.0.0 firmware
  - amdgpu: update GC 11.0.0 firmware
  - amdgpu: update picasso firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update green sardine firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update PSP 13.0.11 firmware
  - amdgpu: update GC 11.0.4 firmware
  - amdgpu: update VCN 4.0.2 firmware
  - amdgpu: update SDMA 6.0.1 firmware
  - amdgpu: update PSP 13.0.4 firmware
  - amdgpu: update GC 11.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update VCN 4.0.5 firmware
  - amdgpu: update PSP 14.0.0 firmware
  - amdgpu: update GC 11.5.0 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update SMU 13.0.6 firmware
  - amdgpu: update PSP 13.0.6 firmware
  - amdgpu: update GC 9.4.3 firmware
  - amdgpu: update renoir firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update aldebaran firmware
  - amdgpu: add support for PSP 14.0.1
  - amdgpu: add support for VPE 6.1.1
  - amdgpu: add support for VCN 4.0.6
  - amdgpu: add support for SDMA 6.1.1
  - amdgpu: add support for GC 11.5.1
  - amdgpu: Add support for DCN 3.5.1
  - cnm: update chips&media wave521c firmware.
  - linux-firmware: Add ordinary firmware for RTL8821AU device
  - amdgpu: add new ISP 4.1.1 firmware
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - linux-firmware: Amphion: Update vpu firmware
  - linux-firmware: Update firmware file for Intel BlazarU core
  - linux-firmware: Update firmware file for Intel Bluetooth Magnetor core
  - linux-firmware: Update firmware file for Intel Bluetooth Solar core
  - linux-firmware: Update firmware file for Intel Bluetooth Solar core
  - i915: Add BMG DMC v2.06
  - linux-firmware: Add CS35L41 HDA Firmware for Asus HN7306
  - linux-firmware: Update firmware tuning for HP Consumer Laptop
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - rtl_bt: Update RTL8822C BT UART firmware to 0x0FD6_407B
  - rtl_bt: Update RTL8822C BT USB firmware to 0x0ED6_407B
  - cirrus: cs35l56: Add firmware for Cirrus CS35L56 for various ASUS laptops
  - linux-firmware: Add firmware and tuning for Lenovo Y770S
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - linux-firmware: Add firmware for Cirrus CS35L56 for various HP laptops
  - i915: Update Xe2LPD DMC to v2.20
  - linux-firmware: Remove Calibration Firmware and Tuning for CS35L41
  - linux-firmware: Add firmware for Lenovo Thinkbook 13X
  - ASoC: tas2781: Add dsp firmware for Thinkpad ICE-1 laptop
  - amdgpu: add DMCUB 3.5 firmware
  - amdgpu: add VPE 6.1.0 firmware
  - amdgpu: add VCN 4.0.5 firmware
  - amdgpu: add UMSCH 4.0.0 firmware
  - amdgpu: add SDMA 6.1.0 firmware
  - amdgpu: add PSP 14.0.0  firmware
  - amdgpu: add GC 11.5.0 firmware
  - amdgpu: update license date
  - Montage: update firmware for Mont-TSSE
  - linux-firmware: Add tuning parameter configs for CS35L41 Firmware
  - linux-firmware: Fix firmware names for Laptop SSID 104316a3
  - linux-firmware: Add CS35L41 HDA Firmware for Lenovo Legion Slim 7 16ARHA7
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
  - linux-firmware: update firmware for MT7922 WiFi device
  - iwlwifi: add gl FW for core87-44 release
  - iwlwifi: add ty/So/Ma firmwares for core87-44 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core87-44 release
  - nvidia: Update Tegra210 XUSB firmware to v50.29
  - amdgpu: update beige goby firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update psp 13.0.11 firmware
  - amdgpu: update gc 11.0.4 firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update renoir firmware
  - amdgpu: update vcn 4.0.2 firmware
  - amdgpu: update sdma 6.0.1 firmware
  - amdgpu: update psp 13.0.4 firmware
  - amdgpu: update gc 11.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update green sardine firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update raven2 firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update smu 13.0.7 firmware
  - amdgpu: update sdma 6.0.2 firmware
  - amdgpu: update ipsp 13.0.7 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update raven firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update smu 13.0.10 firmware
  - amdgpu: update sdma 6.0.3 firmware
  - amdgpu: update psp 13.0.10 firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: update vcn 3.1.2 firmware
  - amdgpu: update psp 13.0.5 firmware
  - amdgpu: update gc 10.3.6 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update arcturus firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update vcn 4.0.3 firmware
  - amdgpu: update smu 13.0.6 firmware
  - amdgpu: update psp 13.0.6 firmware
  - amdgpu: update gc 9.4.3 firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update smu 13.0.0 firmware
  - amdgpu: update sdma 6.0.0 firmware
  - amdgpu: update psp 13.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update  firmware
  - amdgpu: update aldebaran firmware
  - amdgpu: update psp 13.0.8 firmware
  - amdgpu: update gc 10.3.7 firmware
  - linux-firmware: mediatek: Update MT8173 VPU firmware to v1.1.9
  - Merge https://github.com/pkshih/linux-firmware into rtw
  - ath10k: WCN3990: hw1.0: add qcm2290 firmware API file
  - ath10k: WCN3990: hw1.0: move firmware back from qcom/ location
  - i915: Add DG2 HuC 7.10.15
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - linux-firmware: update firmware for en8811h 2.5G ethernet phy
  - mekdiatek: Update mt8186 SOF firmware to v2.0.1
  - rtw89: 8852c: update fw to v0.27.56.14
  - rtw89: 8922a: add firmware v0.35.18.0
  - rtw88: Add RTL8703B firmware v11.0.0
  - linux-firmware: Add firmware for Cirrus CS35L56 for Dell laptops
  - Montage: update firmware for Mont-TSSE
  - WHENCE: Link the Raspberry Pi CM4 and 5B to the 4B
  - Intel Bluetooth: Update firmware file for Intel Bluetooth BE200
  - Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101
  - Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203
  - Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211
  - Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX101
  - Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX101
  - Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203
  - Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203
  - Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211
  - Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211
  - Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210
  - Intel Bluetooth: Update firmware file for Intel Bluetooth AX200
  - Intel Bluetooth: Update firmware file for Intel Bluetooth AX201
  - Intel Bluetooth: Update firmware file for Intel Bluetooth 9560
  - Intel Bluetooth: Update firmware file for Intel Bluetooth 9260
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - linux-firmware: mediatek: Update MT8173 VPU firmware to v1.1.8
  - imx: sdma: update firmware to v3.6/v4.6
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
  - iwlwifi: update 9000-family firmwares to core85-89
  - rtl_bt: Update RTL8852A BT USB firmware to 0xD9D6_17DA
  - linux-firmware: update firmware for MT7921 WiFi device
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
  - linux-firmware: update firmware for MT7922 WiFi device
  - linux-firmware: Add CS35L41 HDA Firmware for Lenovo Thinkbook 16P Laptops
  - amdgpu: Update VCN firmware binaries
  - Intel IPU2: Add firmware files
  - brcm: Add nvram for the Acer Iconia One 7 B1-750 tablet
  - i915: Add Xe2LPD DMC v2.18
  - i915: Update MTL DMC v2.21
  - linux-firmware: update firmware for en8811h 2.5G ethernet phy
  - linux-firmware: add firmware for MT7996
  - xe: First GuC release for LNL and Xe
  - i915: Add GuC v70.20.0 for ADL-P, DG1, DG2, MTL and TGL
  - linux-firmware: Add CS35L41 firmware for Lenovo Legion 7i gen7 laptop (16IAX7)
  - brcm: Add nvram for the Asus Memo Pad 7 ME176C tablet
  - ice: update ice DDP package to 1.3.36.0
  - Intel IPU3 ImgU: Move firmware file under intel/ipu
  - Intel IPU6: Move firmware binaries under ipu/
  - check_whence: Add a check for duplicate link entries
  - WHENCE: Clean up section separators
  - linux-firmware: Add CS35L41 firmware for additional ASUS Zenbook 2023 models
  - panthor: Add initial firmware for Gen10 Arm Mali GPUs
  - amdgpu: DMCUB Updates for DCN321: 7.0.38.0
  - amdgpu: DMCUB updates for Yellow Carp: 4.0.68.0
  - qcom: update venus firmware file for v5.4
  - Montage: add firmware for Mont-TSSE
  - amdgpu: update DMCUB to v0.0.203.0 for DCN314 and DCN32
  - linux-firmware: Remove 2 HP laptops using CS35L41 Audio Firmware
  - linux-firmware: Fix filenames for some CS35L41 firmwares for HP
  - linux-firmware: wilc1000: update WILC1000 firmware to v16.1.2
  - rtl_nic: add firmware for RTL8126A
  - linux-firmware: intel: Add IPU6 firmware binaries
  - ath11k: WCN6855 hw2.0: update to WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
  - qcom: Add Audio firmware for SM8550 HDK
  - Merge tag 'amd-2024-01-30.2' into mlimonci/amd-2024-01-30.2
  - Revert "amdgpu: DMCUB updates for various AMDGPU ASICs"
  - amdgpu: update SMU 13.0.0 firmware
  - amdgpu: update PSP 13.0.0 firmware
  - amdgpu: update GC 11.0.0 firmware
  - brcm: Add brcmfmac43430-sdio.xxx.txt nvram for the Chuwi Hi8 (CWI509) tablet
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - qcom: Add Audio firmware for SM8650 MTP
  - linux-firmware: Add firmware for Cirrus CS35L41 on HP Consumer Laptops
  - Intel Bluetooth: Make spacing consistent with rest of WHENCE
  - amdgpu: update raven2 firmware
  - amdgpu: update raven firmware
  - amdgpu: update SDMA 5.2.7 firmware
  - amdgpu: update PSP 13.0.8 firmware
  - amdgpu: update VCN 3.1.2 firmware
  - amdgpu: update SDMA 5.2.6 firmware
  - amdgpu: update PSP 13.0.5 firmware
  - amdgpu: update GC 10.3.6 firmware
  - amdgpu: add GC 11.0.1 rlc_1 firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update VCN 4.0.0 firmware
  - amdgpu: update SMU 13.0.0 firmware
  - amdgpu: update PSP 13.0.0 firmware
  - amdgpu: update GC 11.0.0 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update picasso firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update green sardine firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update PSP 13.0.11 firmware
  - amdgpu: update GC 11.0.4 firmware
  - amdgpu: update VCN 4.0.2 firmware
  - amdgpu: update PSP 13.0.4 firmware
  - amdgpu: update GC 11.0.1 firmware
  - amdgpu: update arcturus firmware
  - amdgpu: update navi14 firmware
  - amdgpu: add VCN 4.0.3 firmware
  - amdgpu: add SDMA 4.4.2 firmware
  - amdgpu: add SMU 13.0.6 firmware
  - amdgpu: add PSP 13.0.6 firmware
  - amdgpu: Add GC 9.4.3 firmware
  - amdgpu: update renoir firmware
  - amdgpu: update VCN 4.0.4 firmware
  - amdgpu: update SMU 13.0.7 firmware
  - amdgpu: update PSP 13.0.7 firmware
  - amdgpu: update GC 11.0.2 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update SMU 13.0.10 firmware
  - amdgpu: update SDMA 6.0.3 firmware
  - amdgpu: update PSP 13.0.10 firmware
  - amdgpu: update GC 11.0.3 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update aldebaran firmware
  - linux-firmware: Update AMD cpu microcode
  - RTL8192E: Remove old realtek WiFi firmware
  - Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101
  - Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203
  - Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203
  - Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211
  - Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211
  - amdgpu: DMCUB updates for DCN314
  - qcom: Update the firmware for Adreno a630 family of GPUs
  - cirrus: Add CS35L41 firmware for Legion Slim 7 Gen 8 laptops
  - linux-firmware: Add firmware for Cirrus CS35L41 for various Dell laptops
  - linux-firmware: update firmware for qat_4xxx devices
  Resolves: RHEL-35596, RHEL-16799, RHEL-15607


author: Denys Vlasenko <dvlasenk@redhat.com> - 20240715-123.git4c8fb21e
changelog:
  - [Intel 8.10 FEAT] [SRF] QAT_402XX firmware update (RHEL-47353)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - qcom: move signed x1e80100 signed firmware to the SoC subdir
  - qcom: add video firmware file for vpu-3.0
  - amdgpu: update DMCUB to v0.0.225.0 for Various AMDGPU Asics
  - qcom: add gpu firmwares for x1e80100 chipset
  - linux-firmware: add firmware for qat_402xx devices
  - amdgpu: update raven firmware
  - amdgpu: update SMU 13.0.10 firmware
  - amdgpu: update SDMA 6.0.3 firmware
  - amdgpu: update PSP 13.0.10 firmware
  - amdgpu: update GC 11.0.3 firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update PSP 13.0.5 firmware
  - amdgpu: update PSP 13.0.8 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update VCN 4.0.0 firmware
  - amdgpu: update SDMA 6.0.0 firmware
  - amdgpu: update PSP 13.0.0 firmware
  - amdgpu: update GC 11.0.0 firmware
  - amdgpu: update picasso firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update PSP 13.0.11 firmware
  - amdgpu: update GC 11.0.4 firmware
  - amdgpu: update green sardine firmware
  - amdgpu: update VCN 4.0.2 firmware
  - amdgpu: update SDMA 6.0.1 firmware
  - amdgpu: update PSP 13.0.4 firmware
  - amdgpu: update GC 11.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update VPE 6.1.1 firmware
  - amdgpu: update VCN 4.0.6 firmware
  - amdgpu: update SDMA 6.1.1 firmware
  - amdgpu: update PSP 14.0.1 firmware
  - amdgpu: update GC 11.5.1 firmware
  - amdgpu: update VCN 4.0.5 firmware
  - amdgpu: update SDMA 6.1.0 firmware
  - amdgpu: update PSP 14.0.0 firmware
  - amdgpu: update GC 11.5.0 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update renoir firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update PSP 13.0.6 firmware
  - amdgpu: update GC 9.4.3 firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update VCN 4.0.4 firmware
  - amdgpu: update SMU 13.0.7 firmware
  - amdgpu: update SDMA 6.0.2 firmware
  - amdgpu: update PSP 13.0.7 firmware
  - amdgpu: update GC 11.0.2 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update raven2 firmware
  - amdgpu: update aldebaran firmware
  - linux-firmware: Update AMD cpu microcode
  - intel: avs: Add topology file for I2S Analog Devices 4567
  - intel: avs: Add topology file for I2S Nuvoton 8825
  - intel: avs: Add topology file for I2S Maxim 98927
  - intel: avs: Add topology file for I2S Maxim 98373
  - intel: avs: Add topology file for I2S Maxim 98357a
  - intel: avs: Add topology file for I2S Dialog 7219
  - intel: avs: Add topology file for I2S Realtek 5663
  - intel: avs: Add topology file for I2S Realtek 5640
  - intel: avs: Add topology file for I2S Realtek 5514
  - intel: avs: Add topology file for I2S Realtek 298
  - intel: avs: Add topology file for I2S Realtek 286
  - intel: avs: Add topology file for I2S Realtek 274
  - intel: avs: Add topology file for Digital Microphone Array
  - intel: avs: Add topology file for HDMI codecs
  - intel: avs: Add topology file for HDAudio codecs
  - Add a copy of Apache-2.0
  - intel: avs: Update AudioDSP base firmware for APL-based platforms
  - linux-firmware: Add ISH firmware file for Intel Lunar Lake platform
  - amdgpu: update DMCUB to v0.0.224.0 for Various AMDGPU Asics
  - cirrus: cs35l41: Update various firmware for ASUS laptops using CS35L41
  - amdgpu: Update ISP FW for isp v4.1.1
  - linux-firmware: mediatek: Update MT8173 VPU firmware to v1.2.0
  - qcom: Add AIC100 firmware files
  - amlogic: Update bluetooth firmware binary
  - linux-firmware: Update firmware file for Intel BlazarU core
  - linux-firmware: Update firmware file for Intel Bluetooth Magnetor core
  - linux-firmware: Update firmware file for Intel Bluetooth Solar core
  - linux-firmware: Update firmware file for Intel Bluetooth Pulsar core
  - rtl_bt: Update RTL8822C BT UART firmware to 0xB5D6_6DCB
  - rtl_bt: Update RTL8822C BT USB firmware to 0xAED6_6DCB
  - amdgpu: update DMCUB to v0.0.222.0 for DCN314
  - iwlwifi: add ty/So/Ma firmwares for core88-87 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core88-87 release
  - linux-firmware: add new cc33xx firmware for cc33xx chips
  - cirrus: cs35l56: Update firmware for Cirrus CS35L56 for ASUS UM5606 laptop
  - cirrus: cs35l56: Update firmware for Cirrus CS35L56 for various ASUS laptops
  - Merge https://github.com/zijun-hu/qca_btfw into qca
  Resolves: RHEL-47353


author: Denys Vlasenko <dvlasenk@redhat.com> - 20240827-124.git3cff7109
changelog:
  - AMD SEV: IOMMU improperly handles certain special address leading to a loss of guest integrity (RHEL-54256)
  - AMD SEV: Incomplete system memory cleanup in SEV firmware corrupt guest private memory (RHEL-54237)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - amdgpu: DMCUB updates forvarious AMDGPU ASICs
  - rtw89: 8922a: add fw format-1 v0.35.41.0
  - linux-firmware: update firmware for MT7925 WiFi device
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7925)
  - rtl_bt: Add firmware and config files for RTL8922A
  - rtl_bt: Add firmware file for the the RTL8723CS Bluetooth part
  - rtl_bt: de-dupe identical config.bin files
  - rename rtl8723bs_config-OBDA8723.bin -> rtl_bt/rtl8723bs_config.bin
  - linux-firmware: Update AMD SEV firmware
  - linux-firmware: update firmware for MT7996
  - Revert "i915: Update MTL DMC v2.22"
  - Merge tag 'amd-2024-08-12' of https://gitlab.freedesktop.org/drm/firmware into amd-2024-08-12
  - ath12k: WCN7850 hw2.0: update board-2.bin
  - ath11k: WCN6855 hw2.0: update to WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
  - ath11k: WCN6855 hw2.0: update board-2.bin
  - ath11k: QCA2066 hw2.1: add to WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.3
  - ath11k: QCA2066 hw2.1: add board-2.bin
  - ath11k: IPQ5018 hw1.0: update to WLAN.HK.2.6.0.1-01291-QCAHKSWPL_SILICONZ-1
  - qcom: vpu: add video firmware for sa8775p
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - qcom: update path for video firmware for vpu-1/2/3.0
  - Merge https://github.com/zijun-hu/qca_btfw into qca_btfw
  - Merge tag 'rtw-fw-2024-08-08' of https://github.com/pkshih/linux-firmware into rtw89
  - QCA: Update Bluetooth WCN685x 2.1 firmware to 2.1.0-00642
  - rtw89: 8852c: add fw format-1 v0.27.97.0
  - rtw89: 8852bt: add firmware 0.29.91.0
  - amdgpu: Update ISP FW for isp v4.1.1
  - Merge tag 'intel-2024-08-02' of https://gitlab.freedesktop.org/drm/firmware into intel-20240805
  - Merge https://github.com/zijun-hu/qca_btfw into list-20240802
  - mediatek: Update mt8195 SOF firmware
  - Merge tag 'amd-2024-08-02' of https://gitlab.freedesktop.org/drm/firmware into amd-20240802
  - amdgpu: DMCUB updates for DCN314
  - xe: First GuC release v70.29.2 for BMG
  - xe: Add GuC v70.29.2 for LNL
  - i915: Add GuC v70.29.2 for ADL-P, DG1, DG2, MTL, and TGL
  - i915: Update MTL DMC v2.22
  - i915: update MTL GSC to v102.0.10.1878
  - xe: Add BMG HuC 8.2.10
  - xe: Add GSC 104.0.0.1161 for LNL
  - xe: Add LNL HuC 9.4.13
  - i915: update DG2 HuC to v7.10.16
  - amdgpu: Update ISP FW for isp v4.1.1
  - amdgpu: Update ISP FW for isp v4.1.1
  - amdgpu: add new ISP 4.1.1 firmware
  - QCA: Update Bluetooth QCA2066 firmware to 2.1.0-00641
  - amdgpu: update DMCUB to v0.0.227.0 for DCN35 and DCN351
  - Merge tag 'iwlwifi-fw-2024-07-25' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into iwlfifi-fw-2024-07
  - Revert "iwlwifi: update ty/So/Ma firmwares for core89-58 release"
  - linux-firmware: update firmware for MT7922 WiFi device
  - linux-firmware: update firmware for MT7921 WiFi device
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
  - iwlwifi: add gl FW for core89-58 release
  - iwlwifi: update ty/So/Ma firmwares for core89-58 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core89-58 release
  - mediatek: Update mt8195 SOF firmware and sof-tplg
  - ASoC: tas2781: fix the license issue for tas781 firmware
  - rtl_bt: Update RTL8852B BT USB FW to 0x048F_4008
  - .gitignore: Ignore intermediate files
  - i915: Update Xe2LPD DMC to v2.21
  Resolves: RHEL-54256, RHEL-54237


author: Denys Vlasenko <dvlasenk@redhat.com> - 20241014-125.git06bad2f1
changelog:
  - Update linux-firmware to latest upstream (RHEL-62359)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - mtk_wed: add firmware for mt7988 Wireless Ethernet Dispatcher
  - ath12k: WCN7850 hw2.0: update board-2.bin
  - ath12k: QCN9274 hw2.0: add to WLAN.WBE.1.3.1-00162-QCAHKSWPL_SILICONZ-1
  - ath12k: QCN9274 hw2.0: add board-2.bin
  - copy-firmware.sh: rename variables in symlink hanlding
  - copy-firmware.sh: remove no longer reachable test -L
  - copy-firmware.sh: remove no longer reachable test -f
  - copy-firmware.sh: call ./check_whence.py before parsing the file
  - copy-firmware.sh: warn if the destination folder is not empty
  - copy-firmware.sh: add err() helper
  - copy-firmware.sh: fix indentation
  - copy-firmware.sh: reset and consistently handle destdir
  - Revert "copy-firmware: Support additional compressor options"
  - copy-firmware.sh: flesh out and fix dedup-firmware.sh
  - Style update yaml files
  - editorconfig: add initial config file
  - check_whence.py: annotate replacement strings as raw
  - check_whence.py: LC_ALL=C sort -u the filelist
  - check_whence.py: ban link-to-a-link
  - check_whence.py: use consistent naming
  - Add a link from TAS2XXX1EB3.bin -> ti/tas2781/TAS2XXX1EB30.bin
  - tas2781: Upload dsp firmware for ASUS laptop 1EB30 & 1EB31
  - rtlwifi: Add firmware v39.0 for RTL8192DU
  - Revert "ath12k: WCN7850 hw2.0: update board-2.bin"
  - amdgpu: DMCUB DCN35 update
  - brcm: Add BCM4354 NVRAM for Jetson TX1
  - brcm: Link FriendlyElec NanoPi M4 to AP6356S nvram
  - linux-firmware: add firmware for MediaTek Bluetooth chip (MT7920)
  - linux-firmware: add firmware for MT7920
  - amdgpu: update raven firmware
  - amdgpu: update SMU 13.0.10 firmware
  - amdgpu: update PSP 13.0.10 firmware
  - amdgpu: update GC 11.0.3 firmware
  - amdgpu: update VCN 3.1.2 firmware
  - amdgpu: update PSP 13.0.5 firmware
  - amdgpu: update PSP 13.0.8 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update PSP 14.0.4 firmware
  - amdgpu: update GC 11.5.2 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update VCN 4.0.0 firmware
  - amdgpu: update PSP 13.0.0 firmware
  - amdgpu: update GC 11.0.0 firmware
  - amdgpu: update picasso firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update green sardine firmware
  - amdgpu: update VCN 4.0.2 firmware
  - amdgpu: update PSP 13.0.4 firmware
  - amdgpu: update GC 11.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update VCN 4.0.6 firmware
  - amdgpu: update PSP 14.0.1 firmware
  - amdgpu: update GC 11.5.1 firmware
  - amdgpu: update VCN 4.0.5 firmware
  - amdgpu: update PSP 14.0.0 firmware
  - amdgpu: update GC 11.5.0 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update renoir firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update SMU 13.0.6 firmware
  - amdgpu: update SDMA 4.4.2 firmware
  - amdgpu: update PSP 13.0.6 firmware
  - amdgpu: update GC 9.4.3 firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update VCN 4.0.4 firmware
  - amdgpu: update PSP 13.0.7 firmware
  - amdgpu: update GC 11.0.2 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update aldebaran firmware
  - qcom: update gpu firmwares for qcm6490 chipset
  - mt76: mt7996: add firmware files for mt7992 chipset
  - mt76: mt7996: add firmware files for mt7996 chipset variants
  - Merge tag 'rtw-fw-2024-09-13' of https://github.com/pkshih/linux-firmware into 8922a
  - qcom: add gpu firmwares for sa8775p chipset
  - amdgpu: update DMCUB to v0.0.233.0 DCN351
  - rtw89: 8922a: add fw format-2 v0.35.42.1
  - copy-firmware: Handle links to uncompressed files
  - WHENCE: Fix battmgr.jsn entry type
  - amdgpu: Add VPE 6.1.3 microcode
  - amdgpu: add SDMA 6.1.2 microcode
  - amdgpu: Add support for PSP 14.0.4
  - amdgpu: add GC 11.5.2 microcode
  - qcom: qcm6490: add ADSP and CDSP firmware
  - linux-firmware: Update firmware file for Intel Bluetooth Magnetor core
  - linux-firmware: Update firmware file for Intel BlazarU core
  - linux-firmware: Update firmware file for Intel Bluetooth Solar core
  - rtl_bt: Update RTL8852B BT USB FW to 0x0447_9301
  - realtek: rt1320: Add patch firmware of MCU
  - i915: Update MTL DMC v2.23
  - cirrus: cs35l56: Add firmware for Cirrus CS35L54 for some HP laptops
  - amdgpu: Revert sienna cichlid dmcub firmware update
  - Merge tag 'iwlwifi-fw-2024-09-03' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into iwlwifi-20240903
  - iwlwifi: add Bz FW for core89-58 release
  - rtl_nic: add firmware rtl8126a-3
  - linux-firmware: update firmware for MT7921 WiFi device
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
  - amdgpu: update DMCUB to v0.0.232.0 for DCN314 and DCN351
  - qcom: vpu: restore compatibility with kernels before 6.6
  Resolves: RHEL-62359


author: Denys Vlasenko <dvlasenk@redhat.com> - 20241119-126.git79b5dac1
changelog:
  - Update linux-firmware to latest upstream (RHEL-68279)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - iwlwifi: add Bz-gf FW for core91-69 release
  - Merge https://github.com/zijun-hu/qca_btfw into qca
  - qcom: venus-5.4: add venus firmware file for qcs615
  - qcom: update venus firmware file for SC7280
  - QCA: Add 22 bluetooth firmware nvm files for QCA2066
  - mediatek MT7922: update bluetooth firmware to 20241106163512
  - mediatek MT7921: update bluetooth firmware to 20241106151414
  - linux-firmware: update firmware for MT7922 WiFi device
  - linux-firmware: update firmware for MT7921 WiFi device
  - qcom: Add QDU100 firmware image files.
  - qcom: Update aic100 firmware files
  - dedup-firmware.sh: fix infinite loop for --verbose
  - rtl_bt: Update RTL8852BT/RTL8852BE-VT BT USB FW to 0x04D7_63F7
  - cnm: update chips&media wave521c firmware.
  - mediatek MT7920: update bluetooth firmware to 20241104091246
  - linux-firmware: update firmware for MT7920 WiFi device
  - copy-firmware.sh: Run check_whence.py only if in a git repo
  - cirrus: cs35l56: Add firmware for Cirrus CS35L56 for various Dell laptops
  - amdgpu: update DMCUB to v9.0.10.0 for DCN351
  - rtw89: 8852a: update fw to v0.13.36.2
  - rtw88: Add firmware v52.14.0 for RTL8812AU
  - i915: Update Xe2LPD DMC to v2.23
  - linux-firmware: update firmware for mediatek bluetooth chip (MT7925)
  - linux-firmware: update firmware for MT7925 WiFi device
  - WHENCE: Add sof-tolg for mt8195
  - linux-firmware: Update firmware file for Intel BlazarI core
  - qcom: Add link for QCS6490 GPU firmware
  - qcom: update gpu firmwares for qcs615 chipset
  - cirrus: cs35l56: Update firmware for Cirrus Amps for some HP laptops
  - ath11k: move WCN6750 firmware to the device-specific subdir
  - xe: Update LNL GSC to v104.0.0.1263
  - i915: Update MTL/ARL GSC to v102.1.15.1926
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - mediatek: Add sof-tolg for mt8195
  - i915: Add Xe3LPD DMC
  - cnm: update chips&media wave521c firmware.
  - linux-firmware: Add firmware for Cirrus CS35L41
  - linux-firmware: Update firmware file for Intel BlazarU core
  - Makefile: error out of 'install' if COPYOPTS is set
  - check_whence.py: skip some validation if git ls-files fails
  - qcom: Add Audio firmware for X1E80100 CRD/QCPs
  - amdgpu: DMCUB updates forvarious AMDGPU ASICs
  - brcm: replace NVRAM for Jetson TX1
  - rtlwifi: Update firmware for RTL8192FU to v7.3
  - make: separate installation and de-duplication targets
  - check_whence.py: check the permissions
  - Remove execute bit from firmware files
  - configure: remove unused file
  - rtl_nic: add firmware rtl8125d-1
  - iwlwifi: add gl/Bz FW for core91-69 release
  - iwlwifi: update ty/So/Ma firmwares for core91-69 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core91-69 release
  - Merge https://github.com/zijun-hu/qca_btfw into wcn785x
  - cirrus: cs35l56: Add firmware for Cirrus CS35L56 for a Lenovo Laptop
  - cirrus: cs35l56: Add firmware for Cirrus CS35L56 for some ASUS laptops
  - cirrus: cs35l56: Add firmware for Cirrus Amps for some HP laptops
  - linux-firmware: update firmware for en8811h 2.5G ethernet phy
  Resolves: RHEL-68279


author: Denys Vlasenko <dvlasenk@redhat.com> - 20250108-127.gitc0f414a6
changelog:
  - Update linux-firmware to latest upstream (RHEL-73145)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - Fix has_gnu_parallel function
  - rtl_bt: Add separate config for RLT8723CS Bluetooth part
  - amdgpu: revert VCN 3.1.2 firmware
  - amdgpu: revert yellow carp VCN firmware
  - amdgpu: revert sienna cichlid VCN firmware
  - amdgpu: revert navy flounder VCN firmware
  - amdgpu: revert dimgrey cavefish VCN firmware
  - WHENCE: Link the Raspberry Pi CM5 and 500 to the 4B
  - copy-firmware.sh: Fix typo in error message.
  - Add support to install files/symlinks in parallel.
  - Makefile: Remove obsolete/broken reference.
  - check_whence.py: Use a more portable shebang.
  - rtl_bt: Update RTL8852B BT USB FW to 0x04BE_1F5E
  - cnm: update chips&media wave521c firmware.
  - WHENCE: Add "Info:" tag to text that's clearly not part of the license
  - rtl_nic: add firmware rtl8125bp-2
  - qcom: venus-5.4: update firmware binary for sc7180 and qcs615
  - cirrus: cs35l56: Correct filenames of SSID 17aa3832
  - cirrus: cs35l56: Add and update firmware for various Cirrus CS35L54 and CS35L56 laptops
  - cirrus: cs35l56: Correct SSID order for 103c8d01 103c8d08 10431f43
  - rtl_nic: add firmware rtl8125d-2
  - Merge https://github.com/zijun-hu/qca_btfw into qca-bt
  - linux-firmware: Update firmware file for Intel BlazarU core
  - amdgpu: update dmcub 0.0.246.0 firmware
  - Add top level license file.
  - amdgpu: update raven firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: update psp 13.0.14 firmware
  - amdgpu: update vcn 3.1.2 firmware
  - amdgpu: update vpe 6.1.3 firmware
  - amdgpu: update psp 14.0.4 firmware
  - amdgpu: update gc 11.5.2 firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update picasso firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update gc 11.0.4 firmware
  - amdgpu: update green sardine firmware
  - amdgpu: update vcn 4.0.2 firmware
  - amdgpu: update gc 11.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update vcn 4.0.6 firmware
  - amdgpu: update gc 11.5.1 firmware
  - amdgpu: update vcn 4.0.5 firmware
  - amdgpu: update psp 14.0.0 firmware
  - amdgpu: add vcn 5.0.0 firmware
  - amdgpu: add smu 14.0.3 firmware
  - amdgpu: add sdma 7.0.1 firmware
  - amdgpu: add psp 14.0.3 firmware
  - amdgpu: add gc 12.0.1 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update renoir firmware
  - amdgpu: add smu 14.0.2 firmware
  - amdgpu: add sdma 7.0.0 firmware
  - amdgpu: add psp 14.0.2 firmware
  - amdgpu: add gc 12.0.0 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update psp 13.0.6 firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update aldebaran firmware
  - upstream amdnpu firmware
  - QCA: Add Bluetooth nvm files for WCN785x
  - i915: Update Xe2LPD DMC to v2.24
  - cirrus: cs35l56: Add firmware for Cirrus CS35L56 for various Dell laptops
  - iwlwifi: add Bz-gf FW for core89-91 release
  - QCA: Update Bluetooth WCN785x firmware to 2.0.0-00515-2
  - amdgpu: update smu 13.0.10 firmware
  - amdgpu: update sdma 6.0.3 firmware
  - amdgpu: update psp 13.0.10 firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: add smu 13.0.14 firmware
  - amdgpu: add sdma 4.4.5 firmware
  - amdgpu: add psp 13.0.14 firmware
  - amdgpu: add gc 9.4.4 firmware
  - amdgpu: update vcn 3.1.2 firmware
  - amdgpu: update psp 13.0.5 firmware
  - amdgpu: update psp 13.0.8 firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update psp 14.0.4 firmware
  - amdgpu: update gc 11.5.2 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update smu 13.0.0 firmware
  - amdgpu: update psp 13.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update psp 13.0.11 firmware
  - amdgpu: update gc 11.0.4 firmware
  - amdgpu: update vcn 4.0.2 firmware
  - amdgpu: update psp 13.0.4 firmware
  - amdgpu: update gc 11.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update vpe 6.1.1 firmware
  - amdgpu: update vcn 4.0.6 firmware
  - amdgpu: update psp 14.0.1 firmware
  - amdgpu: update gc 11.5.1 firmware
  - amdgpu: update vcn 4.0.5 firmware
  - amdgpu: update psp 14.0.0 firmware
  - amdgpu: update gc 11.5.0 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update arcturus firmware
  - amdgpu: update renoir firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update sdma 4.4.2 firmware
  - amdgpu: update psp 13.0.6 firmware
  - amdgpu: update gc 9.4.3 firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update psp 13.0.7 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update aldebaran firmware
  - ice: update ice DDP wireless_edge package to 1.3.20.0
  - ice: update ice DDP comms package to 1.3.52.0
  - ice: update ice DDP package to ice-1.3.41.0
  - amdgpu: update DMCUB to v9.0.10.0 for DCN314
  - amdgpu: update DMCUB to v9.0.10.0 for DCN351
  - linux-firmware: Update AMD cpu microcode
  - xe: Update GUC to v70.36.0 for BMG, LNL
  - i915: Update GUC to v70.36.0 for ADL-P, DG1, DG2, MTL, TGL
  Resolves: RHEL-73145


author: Denys Vlasenko <dvlasenk@redhat.com> - 20250217-128.git5bc5868b
changelog:
  - Update linux-firmware to latest upstream (RHEL-79835)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - i915: Update Xe2LPD DMC to v2.28
  - ASoC: tas2781: Add regbin firmware by index for single device
  - WHENCE: qca: add missing version information
  - WHENCE: qca: add missing version information
  - WHENCE: split generic QCA section into USB and serial sections
  - rtl_bt: Update RTL8852B BT USB FW to 0x0474_842D
  - iwlwifi: add Bz/gl FW for core93-123 release
  - iwlwifi: update ty/So/Ma firmwares for core93-123 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core93-82 release
  - ASoC: tas2781: Add dsp firmware for new projects
  - amdgpu: DMCUB update for DCN401
  - ath12k: WCN7850 hw2.0: update board-2.bin
  - ath12k: QCN9274 hw2.0: update to WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
  - ath12k: QCN9274 hw2.0: update board-2.bin
  - ath11k: WCN6750 hw1.0: update board-2.bin
  - ath11k: QCN9074 hw1.0: update to WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
  - ath11k: QCA6698AQ hw2.1: add to WLAN.HSP.1.1-04479-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
  - ath11k: QCA6698AQ hw2.1: add board-2.bin
  - ath11k: QCA6390 hw2.0: update board-2.bin
  - ath11k: QCA2066 hw2.1: update to WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
  - ath11k: QCA2066 hw2.1: update board-2.bin
  - ath11k: IPQ8074 hw2.0: update to WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
  - ath11k: IPQ6018 hw1.0: update to WLAN.HK.2.7.0.1-02409-QCAHKSWPL_SILICONZ-1
  - copy-firmware: Fix 'No such file or directory' error.
  - ath11k: add device-specific firmware for QCM6490 boards
  - qca: add more WCN3950 1.3 NVM files
  - qca: add firmware for WCN3950 chips
  - qca: move QCA6390 firmware to separate section
  - qca: restore licence information for WCN399x firmware
  - amdgpu: DMCUB updates for various ASICs
  - amdgpu: DMCUB updates forvarious AMDGPU ASICs
  - Merge https://github.com/quicjathot/bt_msl_fw_1.1.3_00069 into wcn6750
  - qca: Update Bluetooth WCN6750 1.1.0-00476 firmware to 1.1.3-00069
  - qcom:x1e80100: Support for Lenovo T14s G6 Qualcomm platform
  - qcom:x1e80100: Support for Lenovo T14s G6 Qualcomm platform
  - linux-firmware: Update FW files for MRVL SD8997 chips
  - i915: Update Xe2LPD DMC to v2.27
  - Merge https://github.com/vivesahu-qcom/bt_hsp_fw650 into wcn6856
  - qca: Update Bluetooth WCN6856 firmware 2.1.0-00642 to 2.1.0-00650
  - rtl_bt: Update RTL8852B BT USB FW to 0x049B_5037
  - amdgpu: Update ISP FW for isp v4.1.1
  - trivial: contrib: wrap the process in try/except to catch server issues
  - trivial: contrib: use python-magic to detect encoding of emails
  - Merge https://github.com/che-jiang/qca_btfw into qca
  - QCA: Add Bluetooth firmware for QCA6698
  - amdgpu: revert DMCUB 3.1.4 firmware
  - amlogic: update firmware for w265s2
  - mediatek MT7925: update bluetooth firmware to 20250113153307
  - linux-firmware: update firmware for MT7925 WiFi device
  - amdgpu: update psp 13.0.10 firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: update psp 13.0.8 firmware
  - amdgpu: update psp 13.0.5 firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update psp 13.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update smu 14.0.3 firmware
  - amdgpu: update psp 14.0.3 firmware
  - amdgpu: update gc 12.0.1 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update smu 14.0.2 firmware
  - amdgpu: update psp 14.0.2 firmware
  - amdgpu: update gc 12.0.0 firmware
  - amdgpu: update gc 9.4.3 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update psp 13.0.7 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update yellow carp firmware
  - qcom: correct licence information for SA8775P binaries
  - qcom: update SLPI firmware for RB5 board
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - qcom: add DSP firmware for SA8775p platform
  - qcom: correct venus firmware versions
  - qcom: add missing version information
  - linux-firmware: Update firmware (v10) for mt7988 internal
  - iwlwifi: add Bz FW for core90-93 release
  - linux-firmware: wilc3000: add firmware for WILC3000 WiFi device
  - rtw89: 8852b: update fw to v0.29.29.8
  - rtw89: 8852c: update fw to v0.27.122.0
  - rtw89: 8922a: update fw to v0.35.54.0
  - rtw89: 8922a: update fw to v0.35.52.1 and stuffs
  - rtw89: 8852bt: update fw to v0.29.110.0
  - rtw89: 8852b: update fw to v0.29.29.7
  - amdgpu: DMCUB updates for various AMDGPU ASICs
  - amdgpu: update sdma 6.0.3 firmware
  - amdgpu: update psp 13.0.10 firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: update sdma 4.4.5 firmware
  - amdgpu: update psp 13.0.14 firmware
  - amdgpu: update gc 9.4.4 firmware
  - amdgpu: update psp 13.0.5 firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update psp 13.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update picasso firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update psp 13.0.11 firmware
  - amdgpu: update gc 11.0.4 firmware
  - amdgpu: update vcn 4.0.2 firmware
  - amdgpu: update psp 13.0.4 firmware
  - amdgpu: update gc 11.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update vcn 4.0.6 firmware
  - amdgpu: update psp 14.0.1 firmware
  - amdgpu: update vcn 4.0.5 firmware
  - amdgpu: update gc 11.5.0 firmware
  - amdgpu: update vcn 5.0.0 firmware
  - amdgpu: update smu 14.0.3 firmware
  - amdgpu: update psp 14.0.3 firmware
  - amdgpu: update gc 12.0.1 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update arcturus firmware
  - amdgpu: update renoir firmware
  - amdgpu: update smu 14.0.2 firmware
  - amdgpu: update psp 14.0.2 firmware
  - amdgpu: update gc 12.0.0 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update vcn 4.0.3 firmware
  - amdgpu: update sdma 4.4.2 firmware
  - amdgpu: update psp 13.0.6 firmware
  - amdgpu: update gc 9.4.3 firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update psp 13.0.7 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update aldebaran firmware
  - cirrus: cs35l56: Correct some links to address the correct amp instance
  - linux-firmware: Update firmware file for Intel Bluetooth Magnetar core
  - linux-firmware: Update firmware file for Intel BlazarU core
  - linux-firmware: Update firmware file for Intel Bluetooth Solar core
  - cirrus: cs35l41: Add Firmware for Ayaneo system 1f660105
  Resolves: RHEL-79835


author: Denys Vlasenko <dvlasenk@redhat.com> - 20250325-129.git710a336b
changelog:
  - Update linux-firmware to latest upstream (RHEL-84781)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - amdgpu: update dcn 4.01 firmware to 0.1.3.0
  - amdgpu: update dcn 3.5 firmware to 0.1.0.0
  - cirrus: cs35l41: Add Firmware for various HP Laptops using CS35L41 HDA
  - cirrus: Add cs35l56 firmware symlinks for Asus UM5606KA
  - qcom: Add DSP firmware for QCS8300 platform
  - mediatek: Add MT8188 SCP firmware
  - copy-firmware: fail gracefully if moreutils parallel is installed
  - copy-firmware: make script smarter about bad parameters
  - copy-firmware: add usage help text
  - linux-firmware: Update firmware file for Intel BlazarI core
  - qcom: Add Audio firmware for Lenovo Slim 7x
  - qcom: Add Audio firmware for Lenovo T14s
  - amdgpu: DMCUB updates for various ASICs
  - rtw88: Add firmware v33.6.0 for RTL8814AE/RTL8814AU
  - rtw89: 8922a: update fw to v0.35.64.0
  - rtw89: 8922a: update fw to v0.35.63.0
  - rtw89: 8852c: update fw to v0.27.125.0
  - iwlwifi: add Bz/gl FW for core94-91 release
  - iwlwifi: update ty/So/Ma firmwares for core94-91 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core94-91 release
  - amdgpu: update psp 14.0.0 firmware
  - amdgpu: update gc 11.5.0 firmware
  - amdgpu: update vcn 4.0.2 firmware
  - amdgpu: update psp 13.0.4 firmware
  - amdgpu: update gc 11.0.1 firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update gc 11.5.2 firmware
  - amdgpu: update vcn 5.0.0 firmware
  - amdgpu: update smu 14.0.3 firmware
  - amdgpu: update sdma 7.0.1 firmware
  - amdgpu: update gc 14.0.3 firmware
  - amdgpu: update gc 12.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update smu 14.0.2 firmware
  - amdgpu: update psp 14.0.2 firmware
  - amdgpu: update gc 12.0.0 firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update psp 13.0.7 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update vcn 3.1.2 firmware
  - amdgpu: update gc 10.3.6 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update psp 13.0.10 firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update picasso firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update psp 13.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update psp 13.0.14 firmware
  - amdgpu: update gc 9.4.4 firmware
  - amdgpu: update psp 13.0.6 firmware
  - amdgpu: update gc 9.4.3 firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update gc 10.3.7 firmware
  - amdgpu: update psp 14.0.1 firmware
  - amdgpu: update gc 11.5.1 firmware
  - amdgpu: update gc 11.0.4 firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update aldebaran firmware
  - qcom: Update gpu firmwares for qcs8300 chipset
  - linux-firmware: add firmware for qat_420xx devices
  - amdgpu: DMCUB updates for various ASICs
  - i915: Update Xe3LPD DMC to v2.20
  - linux-firmware: update firmware for MT7925 WiFi device
  - mediatek MT7925: update bluetooth firmware to 20250305133215
  - mediatek MT7920: update bluetooth firmware to 20250210151502
  - linux-firmware: Update firmware file for Intel BlazarU core
  - linux-firmware: Update firmware file for Intel BlazarI core
  - intel_vpu: Add firmware for 37xx and 40xx NPUs
  - QCA: Add Bluetooth firmwares for QCA2066 with USB transport
  - QCA: Add two bluetooth firmware nvm files for QCA2066
  - QCA: Update Bluetooth QCA2066 firmware to 2.1.0-00653
  - QCA: Update Bluetooth WCN685x 2.1 firmware to 2.1.0-00653
  - cirrus: cs35l41: Add firmware and tuning for ASUS Consumer laptops
  - cirrus: cs35l41: Add Firmware for various ASUS Commercial laptops
  - ASoC: tas2781: Update dsp firmware for Gemtree project
  - xe: Update GUC to v70.40.2 for BMG, LNL
  - amdgpu: DMCUB updates for various ASICs
  - amdgpu: DCUB update for DCN401 and DCN315
  - cirrus: cs35l41: Add firmware and tunings for CS35L41 driver for Steam Deck
  - ath11k: QCN9074 hw1.0: update to WLAN.HK.2.9.0.1-02175-QCAHKSWPL_SILICONZ-2
  - ath11k: QCA6698AQ hw2.1: update to WLAN.HSP.1.1-04604-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
  - ath11k: QCA6698AQ hw2.1: update board-2.bin
  - rtw89: 8852bt: update fw to v0.29.122.0 and BB parameter to 07
  - linux-firmware: Update AMD SEV firmware
  - linux-firmware: update firmware for MT7920 WiFi device
  - qca: update WCN3988 firmware
  - amdgpu: Update ISP FW for isp v4.1.1
  - qcom: add firmware for Adreno A225
  - cirrus: cs35l56: Add and update firmware for Cirrus CS35L56 for two HP laptops
  - cirrus: cs35l56: Add firmware for Cirrus Amps for some ASUS laptops
  - cirrus: cs35l56: Add and update firmware for Cirrus CS35L56 for various Lenovo laptops
  - cirrus: cs35l56: Update firmware for Cirrus Amps for some Dell laptops
  - linux-firmware: update firmware for en8811h 2.5G ethernet phy
  - i915: Update Xe3LPD DMC to v2.17
  - ASoC: tas2781: Change regbin firmwares for single device
  Resolves: RHEL-84781


author: Denys Vlasenko <dvlasenk@redhat.com> - 20250515-130.git9f8e520f
changelog:
  - Update linux-firmware to latest upstream (RHEL-91590)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - intel_vpu: Update NPU firmware
  - intel: avs: Update topology file for Digital Microphone Array
  - amdgpu: updates for dcn 3.20 and dcn 4.01 firmware to 0.1.10.0
  - linux-firmware: Amphion: Update vpu firmware
  - amd_pmf: Update AMD PMF TA Firmware to v3.1
  - amdgpu: update dcn 4.01 firmware to 0.1.8.0
  - qcom: Add link for SM8350 GPU firmware
  - cirrus: cs35l56: Add firmware for Cirrus Amps for some Lenovo laptops
  - cirrus: cs35l56: Add firmware for Cirrus Amps for some ASUS laptops
  - cirrus: cs35l56: Update firmware for Cirrus Amps for some Lenovo laptops
  - cirrus: cs35l56: Update firmware for Cirrus Amps for some Dell laptops
  - linux-firmware: update firmware for MT7925 WiFi device
  - mediatek MT7925: update bluetooth firmware to 20250425073330
  - rtw89: 8852c: add tables for dynamic antenna TXPWR
  - rtw89: 8922a: update fw to v0.35.71.0
  - brcm: Add NVRAM file for Radxa Rock Pi X mini PC
  - i915: Update Xe3LPD DMC to v2.23
  - rtl_bt: Update RTL8852B BT USB FW to 0x098B_154B
  - ath11k: WCN6855 hw2.0: update board-2.bin
  - ath11k: IPQ5018 hw1.0: update to WLAN.HK.2.6.0.1-01300-QCAHKSWPL_SILICONZ-1
  - ath12k: WCN7850 hw2.0: update to WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
  - ath12k: QCN9274 hw2.0: update board-2.bin
  - qcom: vpu: update video firmware binary for SA8775p
  - iwlwifi: add Bz/gl FW for core95-82 release
  - iwlwifi: update ty/So/Ma firmwares for core95-82 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core95-82 release
  - iwlwifi: add Bz-hr FW for core93-123 release
  - qcom: add QUPv3 firmware for QCS9100 platform
  - ASoC: tas2781: Swap channel for SPI projects.
  - bmi260: Add BMI260 IMU initial configuration data file
  - rtl_bt: Update RTL8852BT/RTL8852BE-VT BT USB FW to 0x1881_BA06
  - rtw89: 8922a: update element RF TXPWR to R40
  - rtw89: 8852c: update element RF TXPWR to R78
  - rtw89: 8852c: add fw v0.27.125.0 with format version 2
  - Revert "rtw89: 8852c: update fw to v0.27.125.0"
  - qcom: vpu: add video firmware binary for qcm6490
  - contrib: process_linux_firmware: set user agent
  - amdgpu: update vcn 4.0.5 firmware
  - amdgpu: update psp 14.0.0 firmware
  - amdgpu: update vcn 4.0.2 firmware
  - amdgpu: update psp 13.0.4 firmware
  - amdgpu: update gc 11.0.1 firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update psp 14.0.4 firmware
  - amdgpu: update gc 11.5.2 firmware
  - amdgpu: update vcn 5.0.0 firmware
  - amdgpu: update smu 14.0.3 firmware
  - amdgpu: update psp 14.0.3 firmware
  - amdgpu: update gc 12.0.1 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: update yellow carp firmware
  - amdgpu: update smu 14.0.2 firmware
  - amdgpu: update psp 14.0.2 firmware
  - amdgpu: update gc 12.0.0 firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update smu 13.0.7 firmware
  - amdgpu: update psp 13.0.7 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update psp 13.0.5 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update psp 13.0.10 firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: update navi10 firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update picasso firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update psp 13.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update psp 13.0.14 firmware
  - amdgpu: update gc 9.4.4 firmware
  - amdgpu: update arcturus firmware
  - amdgpu: update psp 13.0.6 firmware
  - amdgpu: update gc 9.4.3 firmware
  - amdgpu: update beige goby firmware
  - amdgpu: update psp 13.0.8 firmware
  - amdgpu: update psp 14.0.1 firmware
  - amdgpu: update gc 11.5.1 firmware
  - amdgpu: update psp 13.0.11 firmware
  - amdgpu: update gc 11.0.4 firmware
  - amdgpu: update dimgrey cavefish firmware
  - amdgpu: update aldebaran firmware
  - amdgpu: update dcn 4.01 frmware to 0.1.6.0
  - intel: ish: Update license file for ISH
  - intel: avs: Update topology file for I2S Analog Devices 4567
  - intel: avs: Update topology file for I2S Realtek 5663
  - intel: avs: Update topology file for I2S Realtek 5640
  - intel: avs: Update topology file for I2S Realtek 5514
  - intel: avs: Update topology file for I2S Realtek 298
  - intel: avs: Update topology file for I2S Realtek 286
  - intel: avs: Update topology file for I2S Realtek 274
  - intel: avs: Update topology file for I2S Nuvoton 8825
  - intel: avs: Update topology file for I2S Maxim 98927
  - intel: avs: Update topology file for I2S Maxim 98373
  - intel: avs: Update topology file for I2S Maxim 98357a
  - intel: avs: Update topology file for HDAudio codecs
  - intel: avs: Update topology file for HDMI codecs
  - intel: avs: Update topology file for Digital Microphone Array
  - intel: avs: Update topology file for I2S Dialog 7219
  - xe: Update GUC to v70.44.1 for BMG and LNL
  - i915: Update GUC to v70.44.1 for i915 platforms
  - qcom:x1e80100: Iris Support for Lenovo T14s G6 Qualcomm platform
  - qcom:x1e80100: Support for Lenovo Yoga Slim 7 Snapdragon platform
  - Mellanox: Add new mlxsw_spectrum firmware xx.2014.4012
  - linux-firmware: add firmware for Aeonsemi AS21x1x 1G/2.5G/5G/10G Ethernet Phy
  - QCA: Add 8 bluetooth nvm files for WCN785x btusb
  - QCA: Update WCN785x btusb firmware to 2.0.0-00790-3
  - qcom: update firmware binary for SM8250
  - mediatek: Add new mt8195 SOF firmware
  - mediatek: Add new mt8188 SOF firmware
  - rtl_bt: Update RTL8852BT/RTL8852BE-VT BT USB FW to 0x17E9_16ED
  - Revert "rtl_bt: Update RTL8852BT/RTL8852BE-VT BT USB FW to 0x0471_70A6"
  - intel_vpu: Update NPU firmware
  - cirrus: cs35l56: Correct filenames of SSID 103c8e1b and 103c8e1c
  - rtl_bt: Update RTL8852BT/RTL8852BE-VT BT USB FW to 0x0471_70A6
  - amdgpu: update dcn 3.5 and dcn 3.5.1 firmware to 9.0.27.0
  - amdgpu: update dcn 3.1.4 firmware to 8.0.78.0
  Resolves: RHEL-91590


author: Denys Vlasenko <dvlasenk@redhat.com> - 20250626-131.gitb05fabcd
changelog:
  - Update linux-firmware to latest upstream (RHEL-100433)
    Changes since the last update are noted on items below, copied from
    the git changelog of upstream linux-firmware repository.
  - qcom: venus-5.4: add the firmware binary for qcs615
  - Revert "qcom: Add sdx61 Foxconn vendor firmware image file"
  - amdgpu: update dmcub fw for dcn401
  - qcom: Add sdx61 Foxconn vendor firmware image file
  - brcm: Fix symlinks for Khadas VIM SDIO wifi config
  - amdgpu: update renoir firmware
  - amdgpu: update vcn 5.0.0 firmware
  - amdgpu: update smu 14.0.3 firmware
  - amdgpu: update sdma 7.0.1 firmware
  - amdgpu: update psp 14.0.3 firmware
  - amdgpu: update gc 12.0.1 firmware
  - amdgpu: update navy flounder firmware
  - amdgpu: update psp 14.0.4 firmware
  - amdgpu: update gc 11.5.2 firmware
  - amdgpu: update sienna cichlid firmware
  - amdgpu: add raven2 ip discovery firmware
  - amdgpu: update smu 14.0.2 firmware
  - amdgpu: update sdma 7.0.0 firmware
  - amdgpu: update psp 14.0.2 firmware
  - amdgpu: update gc 12.0.0 firmware
  - amdgpu: update vcn 4.0.6 firmware
  - amdgpu: update psp 14.0.1 firmware
  - amdgpu: update gc 11.5.1 firmware
  - amdgpu: update psp 13.0.11 firmware
  - amdgpu: update gc 11.0.4 firmware
  - amdgpu: add picasso ip discovery firmware
  - amdgpu: add raven ip discovery firmware
  - amdgpu: update vega20 firmware
  - amdgpu: update vega12 firmware
  - amdgpu: update smu 13.0.7 firmware
  - amdgpu: update vcn 4.0.4 firmware
  - amdgpu: update psp 13.0.7 firmware
  - amdgpu: update gc 11.0.2 firmware
  - amdgpu: update navi14 firmware
  - amdgpu: update vega10 firmware
  - amdgpu: update gc 10.3.6 firmware
  - amdgpu: update smu 13.0.10 firmware
  - amdgpu: update psp 13.0.10 firmware
  - amdgpu: update gc 11.0.3 firmware
  - amdgpu: update navi12 firmware
  - amdgpu: update vangogh firmware
  - amdgpu: update navi10 firmware
  - amdgpu: add smu 13.0.0 kicker firmware
  - amdgpu: add psp 13.0.0 kicker firmware
  - amdgpu: add gc 11.0.0 kicker firmware
  - amdgpu: add vcn 5.0.1 firmware
  - amdgpu: add sdma 4.4.4 firmware
  - amdgpu: add psp 13.0.12 firmware
  - amdgpu: add gc 9.5.0 firmware
  - amdgpu: add arcturus IP discovery firmware
  - amdgpu: update vcn 4.0.0 firmware
  - amdgpu: update smu 13.0.0 firmware
  - amdgpu: update psp 13.0.0 firmware
  - amdgpu: update gc 11.0.0 firmware
  - amdgpu: update psp 13.0.14 firmware
  - amdgpu: update gc 9.4.4 firmware
  - amdgpu: update psp 13.0.6 firmware
  - amdgpu: update gc 9.4.3 firmware
  - amdgpu: update beige_goby firmware
  - amdgpu: update vcn 4.0.5 firmware
  - amdgpu: update gc 11.5.0 firmware
  - amdgpu: update vcn 4.0.2 firmware
  - amdgpu: update gc 11.0.1 firmware
  - amdgpu: update dimgrey_cavefish firmware
  - amdgpu: update aldebaran firmware
  - WHENCE: fix subtly incorrect licensing
  - amdgpu: update dmcub fw for dcn32 and dcn401
  - mediatek: Update mt8186 SCP firmware
  - amdgpu: Update DMCUB fw for DCN401 & DCN315
  - WHENCE: unify Driver statements
  - qcom: add gpu firmwares for X1P42100 chipset
  - QCA: Update WCN785x btusb firmware to 2.0.0-00799-5
  - rtl_nic: update firmware of RTL8153A
  - qcom: sc8280xp: Updated power FW for X13s
  - linux-firmware: update firmware for MT7986
  - linux-firmware: update firmware for MT7981
  - linux-firmware: update firmware for MT7916
  - cirrus: cs35l41: Add Firmware for ASUS NUC using CS35L41
  - Revert "iwlwifi: add Bz/gl FW for core96-76 release"
  - amdgpu: DMCUB updates for various ASICs
  - mediatek MT7922: update bluetooth firmware to 20250523103438
  - mediatek MT7921: update bluetooth firmware to 20250523111333
  - linux-firmware: update firmware for MT7922 WiFi device
  - linux-firmware: update firmware for MT7921 WiFi device
  - xe: Update GUC to v70.45.2 for BMG, LNL
  - i915: Update GUC to v70.45.2 for DG2
  - xe: Update LNL GSC to v104.0.5.1429
  - amdgpu: DMCUB updates for various ASICs
  - qcom: add QUPv3 firmware for QCS8300 platform
  - Intel IPU7: Add firmware binary files
  - ice: update wireless_edge package to 1.3.23.0
  - ice: update comms package to 1.3.55.0
  - ice: update package to 1.3.43.0
  - linux-firmware: Update firmware file for Intel Pulsar core
  - linux-firmware: Update firmware file for Intel BlazarI core
  - linux-firmware: Update firmware file for Intel Quasar core
  - linux-firmware: Update firmware file for Intel Solar core
  - linux-firmware: Update firmware file for Intel Magnetar core
  - linux-firmware: Update firmware file for Intel BlazarU core
  - iwlwifi: add Bz/gl FW for core96-76 release
  - iwlwifi: update ty/So/Ma firmwares for core96-76 release
  - iwlwifi: update cc/Qu/QuZ firmwares for core96-76 release
  - iwlwifi: update firmwares for 8000 series
  - iwlwifi: update 7265D firmware
  - mediatek MT7925: update bluetooth firmware to 20250526153203
  - linux-firmware: update firmware for MT7925 WiFi device
  - qcom: sc8280xp: FW blob updates for X13s
  - brcm: Add symlinks for Khadas VIM SDIO wifi config to AW-CM256SM.txt
  - ath12k: WCN7850 hw2.0: update to WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
  - cirrus: cs35l41: Fix firmware links for several ASUS laptops
  - cirrus: cs35l41: Add Firmware for various HP Agusta Laptops using CS35L41 HDA
  - Adjust QUPv3 driver name
  - cnm: Add Chips&Media wave633c firmware for NXP i.MX9
  - qcom: add QUPv3 firmware for QCM6490 platform
  - mediatek: Add mt8196 VCP firmware
  - cirrus: cs35l41: Add Firmware for various ACER Laptops using CS35L41 HDA
  - nvidia: add GSP-RM version 570.144 firmware images
  - amdgpu: DMCUB updates for various ASICs
  - powervr: add firmware for Imagination Technologies BXS-4-64 GPU
  - rtl_bt: Update RTL8822C BT USB and UART firmware to 0x7C20
  - brcmfmac: Add a couple of NanoPi devices
  - rtl_nic: add firmware rtl8127a-1
  - cnm: update chips&media wave521c firmware.
  Resolves: RHEL-100433


author: Herton R. Krzesinski <herton@redhat.com> - 20180524-85.git2a9b2cf5
changelog:
  - Add Obsoletes for conflicting ivtv-firmware versions (rhbz 1589055)
  - Add Obsoletes for iwl7265-firmware which is shipped with RHEL 7 (rhbz 1589056)


author: Herton R. Krzesinski <herton@redhat.com> - 20180706-86.gitd1147327
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - qed: Add firmware 8.37.2.0 (rhbz 1584853)


author: Herton R. Krzesinski <herton@redhat.com> - 20180717-87.git8d69bab7
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - cxgb4: update firmware to revision 1.20.8.0 (rhbz 1503622)


author: Herton R. Krzesinski <herton@redhat.com> - 20181011-88.gitc6b6265d
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include latest firmware for Nvidia Graphics (rhbz 1504667)


author: Herton R. Krzesinski <herton@redhat.com> - 20181015-89.gitc6b6265d
changelog:
  - Remove liquidio/lio_23xx_vsw.bin from linux-firmware until GPL violation is
    fully resolved (rhbz 1637694)


author: Herton R. Krzesinski <herton@redhat.com> - 20181109-90.git1baa3486
changelog:
  - Update to latest upstream linux-firmware image for assorted updates
  - Include BPF version of Netronome firmware (rhbz 1637558)


author: Xin Long <lxin@redhat.com> - 2.11-3
changelog:
  - Deal with warnings under gcc 8
  - Call va_end after va_copy in json_vsprintf
  - Fix bogus date in jansson.spec


author: Björn Esser <besser82@fedoraproject.org> - 0.13-3
changelog:
  - Add upstream patch for adding size_t json_c_object_sizeof()
  - Enable partial multi-threaded support


author: Anna Khaitovich <akhaitov@redhat.com> - 0.13.1-0.3
changelog:
  - Don't package empty /usr/share/doc/json-c
  - Resolves: rhbz#1741076
  - Do not use --enable-rdrand
  - Resolves: rhbz#1806532


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-3
changelog:
  - earlykdump: Add a note of final_action option to avoid crash loop
  - Add final_action option to kdump.conf
  - Add failure_action as alias of default and make default obsolete
  - earlykdump: warn when installed kernel version differs from dracut target
  - earlykdump: add more sanity check when generating initramfs
  - fadump: use the original initrd to rebuild fadump initrdfrom


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-4
changelog:
  - kexec-kdump-howto.txt: Add document about encrypted targets
  - kexec-kdump-howto.txt: Add document about initramfs rebiuld
  - kexec-kdump-howto: Add note on setting correct value of kptr_restrict
  - doc: fix dead links in the file kexec-kdump-howto.txt
  - earlykdump: provide a prompt message after the rebuilding of kdump initramfs.
  - Get rid of duplicated strip_comments when reading config
  - mkdumprd: Improve the config reading logic
  - kdumpctl: don't always rebuild when extra_modules is set
  - kdumpctl: follow symlink when checking for modified files
  - fadump: leverage kernel support to re-regisgter FADump


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-5
changelog:
  - kdumpctl: check for ssh path availability when rebuild
  - kdumpctl: Check kdump.conf for error when rebuild is called
  - makedumpfile: x86_64: Add support for AMD Secure Memory Encryption
  - aarch64/kdump.sysconfig: Make config options similar to x86_64


author: Pingfan Liu <piliu@redhat.com> - 2.0.19-9
changelog:
  - kexec/arm64: Add support for handling zlib compressed (Image.gz) image
  - kexec/kexec-zlib.h: Add 'is_zlib_file()' helper function
  - kexec-uImage-arm64.c: Fix return value of uImage_arm64_probe()
  - kexec/kexec.c: Add the missing close() for fd used for kexec_file_load()


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-5
changelog:
  - Don't execute final_action if failure_action terminates the system
  - module-setup: re-fix 99kdumpbase network dependency
  - kdumpctl: bail out immediately if host key verification failed
  - kdumpctl: echo msg when waiting for connection
  - kdumpctl: distinguish the failed reason of ssh
  - kdumpctl: wait a while for network ready if dump target is ssh
  - dracut-module-setup: filter out localhost for generic_fence_kdump
  - dracut-module-setup: get localhost alias by manual


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-6
changelog:
  -rhel-8.2.0, origin/rhel-8.2.0) Increase SECTION_MAP_LAST_BIT to 4
  - spec: move binaries from /sbin to /usr/sbin
  - As /etc/kdump.conf timestamp is updated do not compare it when doing rpm --verify
  - kdumpctl: make reload fail proof


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-10
changelog:
  - arm64: kdump: deal with a lot of resource entries in /proc/iomem
  - arm64: kexec: allocate memory space avoiding reserved regions
  - kexec: add variant helper functions for handling memory regions


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-28
changelog:
  - mkdumprd: Fix nfs detection in to_mount
  - Always wrap up call to dracut get_persistent_dev function
  - man: improve description about /etc/kdump/{pre.d,post.d}interface


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-30
changelog:
  - x86_64: enable the kexec file load by default
  - Revert "kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default"


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-31
changelog:
  - ppc64/kdump: use kexec_file_load when secureboot is enabled
  - kdump_pre: make notes more precise
  - dracut-kdump.sh: exit shell when machine reboot
  - kdump.conf: fix a grammar issue
  - kdumpctl: detect modification of scripts by its directory's timestamp
  - module-setup.sh: suppress false alarm
  - kexec-tools.spec: make the existence of pre.d and post.d mandatory


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-34.2
changelog:
  - kdump-lib.sh: Remove is_atomic
  - Refactor kernel image and initrd detection code
  - early-kdump: Use consistent symbol link for kernel and initramfs
  - kdump-lib: strip grub device from kdump_bootdir
  - kdumpctl: fix driver change detection on latest Fedora


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-25
changelog:
  - kdump.conf: Specify /etc/kdump/{pre.d,post.d}interface
  - dracut-kdump.sh: Execute the binary and script filesin /etc/kdump/{pre.d,post.d}
  - kdumpctl: Check the update of the binary and script files in /etc/kdump/{pre.d,post.d}
  - dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-26
changelog:
  - Fix kdump failure when mount target specified by dracut_args
  - mkdumprd: Fix dracut error on multiple extra_modules


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-38
changelog:
  - Don's try to restart dracut-initqueue if it's already failed
  - fadump-howto: update about 'nocma' and 'off' options for 'fadump=' parameter
  - dracut-module-setup.sh: use auto6 for ipv6
  - module-setup.sh: enable vlan on team interface
  - Fix rootfs detection in dump_fs
  - Remove RHEL-only patch: kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch
  - Rebase to makedumpfile-1.6.8 (step1)


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-43
changelog:
  - Always include watchdog-modules
  - mkdumprd: Ensure kdumpbase is added
  - Move watchdog detect and install code to module-setup.sh
  - Add a helper to omit non-mandatory dracut module
  - Move some dracut module dependencies checks to module-setup.sh
  - Set watchdog's pretimeout to zero in kdump kernel
  - kdump-lib.sh: Use a more generic helper to detect omitted dracut module
  - Fix the watchdog drivers detection code
  - Add a helper for detecting watchdog drivers
  - Remove a redundant nfs check
  - kdumpctl: split the driver detection from fs dection function
  - kdump.service: use ConditionKernelCommandLine=crashkernel
  - Revert "Append both nofail and x-systemd.before to kdump mount target"
  - Revert "Don's try to restart dracut-initqueue if it's already failed"
  - Fix dump_fs mount point detection and fallback mount
  - kdump.conf: Update doc about core_collector for ssh target
  - Save the final failure information to log file if saving vmcore failed
  - Doc: Improve the kdump sysconfig document
  - kdumpctl: fix a variable expansion in check_fence_kdump_config()
  - Fedora 33 rhpkg build bug


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-44
changelog:
  - module-setup.sh: don't polute the namespace unnecessarily
  - module-setup.sh: don't source $dracutfunctions
  - logger: source the logger file individually
  - dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-45
changelog:
  - origin/rhel-8.4.0) Revert "Revert "Append both nofail and x-systemd.before to kdump mount target""
  - kdump.conf: add ipv6 example for nfs and ssh dump
  - fix kdump failure of saving vmcore with the scp + ipv6 method


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-37
changelog:
  - Doc: improve the usage documentation of the logger
  - Update the kdump sysconfig
  - Capitalize the configuration name of log level
  - Add the rd.kdumploglvl option to control log level in the second kernel
  - Appropriately converts logger numeric level to syslog log level
  - Remove unused log levels for kdump logger
  - Add sanity checks for the log levels
  - Add code comments to help better understanding
  - Doc: add a documentation for the usage of logger
  - Improve debugging in the kdump kernel
  - kdumpctl: add the '-d' option to enable the kexec loading debugging messages
  - kdump.sysconfig: add the kdump logger configurations
  - enable the logger for kdump
  - introduce the kdump logger from the dracut


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-50
changelog:
  - rd.route should use the name from kdump_setup_ifname
  - get kdump ifname once in kdump_install_netdev


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-51
changelog:
  - Stop reloading kdump service on CPU hotplug event for FADump
  - fadump: improve fadump-howto.txt about remote dump target setup


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-52
changelog:
  - Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable
  - Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet
  - mkdumprd: display the absolute path of dump location in the check_user_configured_target()


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-53
changelog:
  - check for invalid physical address of /proc/kcore when making ELF dumpfile
  - check for invalid physical address of /proc/kcore when finding max_paddr
  - fix format issue in find_online_znet_device
  - check the existence of /sys/bus/ccwgroup/devices before trying to find online network device
  - kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-54
changelog:
  - kdump/ppc64: rebuild initramfs image after migration
  - Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand
  - kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-48
changelog:
  - kdumpctl: Add kdumpctl estimate
  - mkdumprd: make use of the new get_luks_crypt_dev helper
  - kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
  - kdump-lib.sh: introduce a helper to get underlying crypt device
  - RHEL-only: keep total memory size coherent to RHEL-only kernel patch
  - Show write byte size in report messages
  - Add shorthand --show-stats option to show report stats
  - Add --dry-run option to prevent writing the dumpfile
  - kdump-lib.sh: introduce functions to return recommened mem size


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-59
changelog:
  - makedumpfile: printk: use committed/finalized state values
  - makedumpfile: printk: add support for lockless ringbuffer
  - kexec-tools: printk: Use %zu to format size_t
  - kexec-tools: printk: Use ULL suffix for 64-bit constants
  - kexec-tools: printk: add support for lockless ringbuffer


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-60
changelog:
  - fadump-init: clean up mount points properly
  - fadump: kdumpctl should check the modules used by the fadump initramfs
  - fadump: isolate fadump initramfs image within the default one
  - mkdumprd: Use xz for squash image compression


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-66
changelog:
  - kdump/ppc64: suppress the error message "Could not find a registered notification tool" from servicelog_notify
  - Enable zstd compression for makedumpfile in kexec-tools.spec


author: Pingfan Liu <piliu@redhat.com> - 2.0.20-69
changelog:
  - s390: add support for --reuse-cmdline
  - use slurp_proc_file() in get_command_line()
  - add slurp_proc_file()
  - s390: use KEXEC_ALL_OPTIONS
  - s390: add variable command line size
  - util_lib/elf_info: harden parsing of printk buffer
  - print error when reading with unsupported compression
  - use cycle detection when parsing the prink log_buf
  - use pointer arithmetics for dump_dmesg
  - add generic cycle detection


author: Pingfan Liu <piliu@redhat.com> - 2.0.24-1
changelog:
  - kdumpctl: sync the $TARGET_INITRD after rebuild
  - Avoid false-positive mem_section validation with vmlinux
  - Rebase kexec-tools to 2.0.24
  - Rebase makedumpfile to 1.7.1


author: Pingfan Liu <piliu@redhat.com> - 2.0.24-6
changelog:
  - kdump-lib: Add the CoreOS kernel dir to the boot_dirlist
  - kdump-lib: attempt to fix BOOT_IMAGE detection
  - kdump-lib: change how ostree based systems are detected
  - kdump-lib: clear up references to Atomic/CoreOS


author: Pingfan Liu <piliu@redhat.com> - 2.0.25-2
changelog:
  - mkdumprd: Improve error messages on non-existing NFS target directories
  - fadump: avoid non-debug kernel use for fadump case


author: Pingfan Liu <piliu@redhat.com> - 2.0.25-3
changelog:
  - kdump.conf: use a simple generator script to maintain
  - Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces


author: Pingfan Liu <piliu@redhat.com> - 2.0.25-4
changelog:
  - Don't check fs modified when dump target is lvm2 thinp
  - Add dependency of dracut lvmthinpool-monitor module
  - lvm.conf should be check modified if lvm2 thinp enabled
  - Add lvm2 thin provision dump target checker
  - Fix the sync issue for dump_fs


author: Pingfan Liu <piliu@redhat.com> - 2.0.25-5
changelog:
  dracut-module-setup: Fix invalid rd.znet command line entry
   dracut-module-setup: Fix persistent nic name on s390


author: Pingfan Liu <piliu@redhat.com> - 2.0.26-6
changelog:
  - dracut-module-setup.sh: skip installing driver for the loopback interface
  - Reduce kdump memory consumption by only installing needed NIC drivers


author: Pingfan Liu <piliu@redhat.com> - 2.0.26-8
changelog:
  - mkdumprd: Use the correct syntax to redirect the stderr to null
  - mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS
  - Add NICs that handle DNS queries to the allowlist


author: Pingfan Liu <piliu@redhat.com> - 2.0.26-11
changelog:
  - powerpc: update kdumpctl to load kernel signing key for fadump
  - powerpc: update kdumpctl to remove deletion of kernel signing key once loaded


author: Pingfan Liu <piliu@redhat.com> - 2.0.26-13
changelog:
  - dracut-module-setup.sh: also install the driver of physical NIC for Hyper-V VM with accelerated networking


author: Pingfan Liu <piliu@redhat.com> - 2.0.25-5
changelog:
  - dracut-module-setup: Fix invalid rd.znet command line entry
  - dracut-module-setup: Fix persistent nic name on s390


author: David Howells <dhowells@redhat.com> - 1.5.9-1
changelog:
  - Add manpages for get_persistent.
  - Fix memory leaks in keyctl_describe/read/get_security_alloc().
  - Use keyctl_describe_alloc in dump_key_tree_aux rather than open coding it.
  - Exit rather than returning from act_xxx() functions.
  - Fix memory leak in dump_key_tree_aux.
  - Only get the groups list if we need it.
  - Don't trust sscanf's %n argument.
  - Use the correct path macros in the specfile.
  - Avoid use realloc when the memory has no content.
  - Fix a bunch of issues in key.dns_resolver.
  - Fix command table searching in keyctl utility.
  - Fix a typo in the permissions mask constants.
  - Improve the keyctl_read manpage.
  - Add man7 pages describing various keyrings concepts.


author: David Howells <dhowells@redhat.com> - 1.5.10-1
changelog:
  - Include sys/types.h in keyutils.h.
  - The dns resolver needs limits.h.
  - Overhaul of all manual pages.
  - Some manual pages moved to Linux man-pages project.
  - Add Diffie-Helman keyctl function.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-5
changelog:
  - weak-modules: handle versions with + and other special regex symbols
  - weak-modules: fix misleading message when cannot find dracut.
    Resolves: rhbz#1609372.


author: Eugene Syromiatnikov <esyr@redhat.com> - 25-6
changelog:
  - weak-modules: check also for /lib/modules/$krel/symvers.gz as a possible
    symvers file path.
    Resolves: rhbz#1614119.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-7
changelog:
  - weak-modules: use is_kernel_installed wrapper in update_modules_for_krel.
  - weak-modules: more abstract symvers search implementation.
  - weak-modules: use additional paths for System.map file.
    Resolves: rhbz#1621306.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-8
changelog:
  - weak-modules: fix initial state creation for dry-run
  - weak-modules: check compatibility in a temporary directory
    Resolves: rhbz#1622990.


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-10
changelog:
  - weak-modules: group modules on add-kernel
  - weak-modules: do not make groups if there are no extra modules
    Resolves: rhbz#1649211


author: Yauheni Kaliuta <ykaliuta@redhat.com> - 25-16
changelog:
  - weak-modules: update_modules_for_krel: always finish sandbox
  - weak-modules: groupping: use dependencies of extra/ provider
    Resolves: rhbz#1778889


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.48-51
changelog:
  - Modified the setting of the dm target version for VDO devices to only
    change when the dm interface (i.e. table line) changes instead of tying
    it to the VDO version.
    - Resolves: rhbz#1665298
  - Improved error handling when resizing VDO devices.
    - Resolves: rhbz#1659247
  - Reduced, removed, and/or rate limited error logging to avoid
    soft-lockups.
    - Resolves: rhbz#1678785
    - Resolves: rhbz#1698664
  - Began converting the VDO device to conform to the DM convention of not
    issuing I/O while suspended.
    - Relates: rhbz#1659303
  - Added a dmsetup message to close the UDS index of a running VDO device.
    - Relates: rhbz#1643291


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.102-53
changelog:
  - Continued converting the VDO device to conform to the DM convention of
    not issuing I/O while suspended.
    - Resolves: rhbz#1659303
  - Added more rate limiting of error logging in both the kvdo and uds
    modules in order to avoid soft-lockups on newer kernels.
    - Resolves: rhbz#1703243
  - Eliminated the passing of addresses of unaligned fields in packed
    - Resolves: rhbz#1718058


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.134-56
changelog:
  - Finished converting the VDO device to conform to the DM convention of not
    issuing I/O while suspended.
  - Resolves: rhbz#1659303
  - Fixed a bug where crash recovery could use the wrong threads for certain
    operations potentially resulting in memory corruption.
  - Resolves: rhbz#1703621
  - Fixed a bug which could cause segfaults when running the vdostatus
    command.
  - Resolves: rhbz#1669960
  - Eliminated a backtrace from the error logged when creating a VDO device
    with an erroneous physical size in the table line.
  - Resolves: rhbz#1717435
  - Fixed a possible use-after-free of the UDSConfiguration.
  - Resolves: rhbz#1653802
  - Made VDO a singleton device because multi-segment devices containing a
    VDO have a number of issues.
  - Resolves: rhbz#1725077
  - Converted the VDO device to conform to the DM convention of not issuing
    writes from the constructor.
  - Resolves: rhbz#1669086


author: - Andy Walsh <awalsh@redhat.com> - 6.2.1.138-56
changelog:
  - Fixed a crash on allocation failure and a use-after-free race introduced by
    the changes to avoid issuing I/O while suspended.
  - Resolves: rhbz#1659303


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.18-57
changelog:
  - Reduced the default number of index zones as the previous default
    attempted to maximize index performance at the expense of all other
    processes.
  - Resolves: rhbz#1703507
  - Fixed an assertion when resuming a VDO device which was not suspended
    with the no-flush flag.
  - Resolves: rhbz#1752893


author: - Andy Walsh <awalsh@redhat.com> - 6.2.2.117-63
changelog:
  - Fixed a bug which would cause the UDS index to be perceived as corrupt
    when a VDO volume is moved to a system with a different endianness.
  - Resolves: rhbz#1745211
  - Modified UDS index rebuild to be interruptible so that shutting down a
    VDO whose index is rebuilding need not wait for the index rebuild to
    complete.
  - Resolves: rhbz#1737639
  - Prevented two VDO devices from being started on the same storage.
  - Resolves: rhbz#1725052
  - Fixed rare races which could result in VDO issuing I/O while suspended.
  - Resolves: rhbz#1766358
  - Fixed crashes when re-suspending a VDO after it had been resumed.
  - Resolves: rhbz#1765253
  - Made async mode ACID. Added async-unsafe mode to preserve the performance of
    the old implementation.
  - Resolves: rhbz#1657301


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.91-73
changelog:
  - Removed unused UDS bio statistics.
  - Resolves: rhbz#1827762
  - Removed support for old kernels.
  - Resolves: rhbz#1827762
  - Fixed Coverity errors.
  - Resolves: rhbz#1827763
  - Improved the error message when slab journal locks overflow.
  - Resolves: rhbz#1827761
  - Fixed a bug which could result in VDO issuing I/O while suspended.
  - Resolves: rhbz#1824789
  - Fixed a rare double-enqueue bug in the recovery journal.
  - Resolves: rhbz#1824802
  - Modified VDO to not allocate an index if the VDO device is started
    with deduplication disabled.
  - Resolves: rhbz#1755448
  - Nodified VDO to not log spurious journal lock warnings when cleaning up
    write requests which failed due to the VDO going read-only.
  - Resolves: rhbz#1840455


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.107-73
changelog:
  - Fixed a bug which can cause a soft lockup if users interrupt processes
    waiting on dm-setup commands.
  - Resolves: rhbz#1844651
  - Fixed a rare race which could cause a suspend of a VDO device to fail.
  - Resolves: rhbz#1847747


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.107-74
changelog:
  - Updated dependencies to prevent installing kernel-rt incorrectly.
  - Resolves: rhbz#1811923
  - Bumped requirement for new 4.18 kernel
  - Relates: rhbz#1812069


author: - Andy Walsh <awalsh@redhat.com> - 6.2.3.114-74
changelog:
  - Fixed an index bug which can cause vdo stop to hang on systems with many
    cores.
  - Resolves: rhbz#1791056
  - Fixed a bug where VDO would ignore errors from empty flush bios.
  - Resolves: rhbz#1858363


author: - Andy Walsh <awalsh@redhat.com> - 6.2.4.14-74
changelog:
  - Fixed a bug which causes the UDS index to consume an excessive
    number of CPU cycles when the VDO device is idle.
  - Resolves: rhbz#1870660


author: - Andy Walsh <awalsh@redhat.com> - 6.2.4.26-74
changelog:
  - Modified physical growth to validate the new VDO size against the size of
    the underlying storage.
  - Resolves: rhbz#1732922
  - Fixed issues which prevented lvrename from working on lvm managed
    VDO devices.
  - Resolves: rhbz#1888419


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.11-78
changelog:
  - Introduced new memory size parameter values for UDS indexes which have
    been converted from vdo script management to LVM.
  - Resolves: rhbz#1928284


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.41-78
changelog:
  - Fixed bugs in reading the UDS index of a VDO volume which was converted
    to LVM.
  - Resolves: rhbz#1928284


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.62-79
changelog:
  - Fixed chapter computation for a converted sparse index.
  - Resolves: rhbz#1965516
  - Fixed invalidation of converted chapters.
  - Resolves: rhbz#1966818
  - Removed extraneous fields from the super block of a converted index.
  - Resolves: rhbz#1965546
  - Fixed calculation of the number of expiring chapters in a converted
    index.
  - Resolves: rhbz#1975546
  - Fixed bugs rebuilding a converted index.
  - Resolves: rhbz#1966824


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.65-79
changelog:
  - Removed unneeded allocations from the previous fixes for rebuilding
    a converted index.
  - Resolves: rhbz#1966824


author: - Andy Walsh <awalsh@redhat.com> - 6.2.5.72-79
changelog:
  - Fixed a bug which could result in the UDS index issuing I/O while
    suspended.
  - Resolves: rhbz#1990180


author: - Andy Walsh <awalsh@redhat.com> - 6.2.6.3-83
changelog:
  - Adjusted kernel dependencies to grab the right packages.
  - Resolves: rhbz#2011426
  - Rebuilt for latest kernel.
  - Relates: rhbz#2000909


author: - Andy Walsh <awalsh@redhat.com> - 6.2.7.17-86
changelog:
  - Fixed bug which could result in empty flushes being issued to the storage
    below vdo while suspended.
  - Resolves: rhbz#2013056
  - Fixed syntax mismatch which prevented lvm from being able to configure a
    512MB UDS index.
  - Resolves: rhbz#2073203
  - Fixed a race handling timeouts of dedupe index queries.
  - Resolves: rhbz#2092075


author: - Andy Walsh <awalsh@redhat.com> - 6.2.8.1-87
changelog:
  - Fixed a bug which could produce a deadlock after multiple saves and resumes
    of a vdo.
  - Resolves: rhbz#2109047


author: - Susan LeGendre-McGhee <slegendr@redhat.com> - 6.2.8.7-88
changelog:
  - Fixed bug in read-only rebuild when the logical size of the volume is an
    exact multiple of 821 4K blocks.
  - Resolves: rhbz#2166131


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_255.el8_dup8.3-1
changelog:
  - bfcc924fa05e36abe7a039ac5ec2be581e20c288
  - atlantic kernel module for Driver Update Program
  - Resolves: #bz1944615


author: Eugene Syromiatnikov <esyr@redhat.com> 1.10.0_dup8.1-1
changelog:
  - 9158390ccae759c2c0221de6e0c9541375a480f6
  - bnxt_en kernel module for Driver Update Program
  - Resolves: #bz1802054


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_348_dup8.5-1
changelog:
  - 9dc660bf1362f5a22a908e61004498cf7ec063a8
  - cfg80211 kernel module for Driver Update Program
  - Resolves: #bz2051885, #bz2051886


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_348_dup8.5-2
changelog:
  - Bump release due to "Package build kmod-redhat-cfg80211-4.18.0_348_dup8.5-1.el8_5
    kept gated because not onboarded to gating".


author: Eugene Syromiatnikov <esyr@redhat.com> 0.8.2_k_dup8.2-1
changelog:
  - afe1694503958c189ab98273de137c65bc3909f8
  - ice kernel module for Driver Update Program
  - Resolves: #bz1875784


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0.210_dup8.2-1
changelog:
  - 2f22e260c6b75f2acb86bd91292dc8c66f56c481
  - ionic kernel module for Driver Update Program
  - Resolves: #bz1851940


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0.210_dup8.2-2
changelog:
  - Bump release due to "Package build kmod-redhat-ionic-4.18.0.210_dup8.2-1.el8_2
    kept gated because not onboarded to gating".


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_348_dup8.5-1
changelog:
  - 9dc660bf1362f5a22a908e61004498cf7ec063a8
  - mac80211 kernel module for Driver Update Program
  - Resolves: #bz2051885, #bz2051886


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_348_dup8.5-2
changelog:
  - Bump release due to "Package build kmod-redhat-mac80211-4.18.0_348_dup8.5-1.el8_5
    kept gated because not onboarded to gating".


author: Eugene Syromiatnikov <esyr@redhat.com> 5.0_0_dup8.2-1
changelog:
  - 86de78c2e6f431762836a4ea5891f891bc0fdcb4
  - mlx5_core kernel module for Driver Update Program
  - Resolves: #bz1889733


author: Eugene Syromiatnikov <esyr@redhat.com> 5.0_0_dup8.2-2
changelog:
  - Bump release due to "Package build kmod-redhat-mlx5_core-5.0_0_dup8.2-1.el8_2
    kept gated because not onboarded to gating".


author: Eugene Syromiatnikov <esyr@redhat.com> 35.101.00.00_dup8.3-1
changelog:
  - bfcc924fa05e36abe7a039ac5ec2be581e20c288
  - mpt3sas kernel module for Driver Update Program
  - Resolves: #bz1915214


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_363_dup8.5-1
changelog:
  - 9dc660bf1362f5a22a908e61004498cf7ec063a8
  - mt7921 kernel module for Driver Update Program
  - Resolves: #bz2051885


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_363_dup8.5-2
changelog:
  - Bump release due to "Package build kmod-redhat-mt7921-4.18.0_363_dup8.5-1.el8_5
    kept gated because not onboarded to gating".


author: Eugene Syromiatnikov <esyr@redhat.com> 2.0.8-1.3
changelog:
  - Replace "and" with "with" in pre-4.18.0-240.14.1.el8_3 kernel dependency
    to match it more precisely (it passes when both post-4.18.0-240.14.1.el8_3
    and pre-4.18.0-240.el8 kernels installed otherwise).


author: Eugene Syromiatnikov <esyr@redhat.com> 2.0.8-3
changelog:
  - Add "Provides: oracleasm" and "Provides: oracleasm-kmod".
  - Dropping "0001-oracleasm-driver-replace-fs_context-with-mount_pseud.patch".


author: Eugene Syromiatnikov <esyr@redhat.com> 2.0.8-18.2
changelog:
  - Add Obsoletes: tags for 8.4.z kernel-specific sub-packages (RHEL-76082).
  - Rebuild against kernel-4.18.0-553.el8_10.


author: Eugene Syromiatnikov <esyr@redhat.com> 4.18.0_363_dup8.5-1
changelog:
  - 9dc660bf1362f5a22a908e61004498cf7ec063a8
  - rtw89 kernel module for Driver Update Program
  - Resolves: #bz2051886


author: Julien Rische <jrische@redhat.com> - 1.18.2-21
changelog:
  - Backport fix of memory use after free during libkrad cleanup
  - Backport support for larger RADIUS attributes in libkrad
  - Resolves: rhbz#2103125


author: Julien Rische <jrische@redhat.com> - 1.18.2-27
changelog:
  - Fix memory leak in GSSAPI interface
    Resolves: RHEL-27250
  - Fix memory leak in PMAP RPC interface
    Resolves: RHEL-27244
  - Make TCP waiting time configurable
    Resolves: RHEL-17131


author: Julien Rische <jrische@redhat.com> - 1.18.2-29
changelog:
  - CVE-2024-37370 CVE-2024-37371
    Fix vulnerabilities in GSS message token handling
    Resolves: RHEL-45398 RHEL-45386


author: Julien Rische <jrische@redhat.com> - 1.18.2-30
changelog:
  - libkrad: implement support for Message-Authenticator (CVE-2024-3596)
    Resolves: RHEL-50253
  - Remove RSA protocol for PKINIT
    Resolves: RHEL-17616


author: Julien Rische <jrische@redhat.com> - 1.18.2-31
changelog:
  - Prevent overflow when calculating ulog block size (CVE-2025-24528)
    Resolves: RHEL-78248
  - kdb5_util: fix DB entry flags on modification
    Resolves: RHEL-56060


author: Julien Rische <jrische@redhat.com> - 1.18.2-32
changelog:
  - Do not block HMAC-MD4/5 in FIPS mode
    Resolves: RHEL-86786
  - Don't issue RC4 session keys by default (CVE-2025-3576)
    Resolves: RHEL-88049
  - Add PKINIT paChecksum2 from MS-PKCA v20230920
    Resolves: RHEL-82648


author: Robbie Harwood <rharwood@redhat.com> - 1.18-1
changelog:
  - New upstream version (1.18)
  - Resolves: #1802334
  - Resolves: #1820311
  - Resolves: #1791062
  - Resolves: #1784655


author: Robbie Harwood <rharwood@redhat.com> - 1.18.2-3
changelog:
  - Match Heimdal behavior for channel bindings
  - Code hygiene + test stability fix included
  - Resolves: #1840518


author: Cestmir Kalina <ckalina@redhat.com> - 1.1-1
changelog:
  - Replace the Python interpreter path to RHEL8 compliant path.
  - Related: #1633691
  - Resolves: #1637594


author: Cestmir Kalina <ckalina@redhat.com> - 1.3-1
changelog:
  - Resolves: #1642134 Error restrict bugs to groups without permission while
    trying to submit RHEL8 symbols
  - New ksc reports will no longer be submitted under redhat bugzilla group.
  - At least one bugzilla group must be specified by a ksc user, otherwise ksc
    will terminate with an error.
  - Version bump to 1.3


author: Cestmir Kalina <ckalina@redhat.com> - 1.4-1
changelog:
  - Resolves: #1643187 ksc manpage lies -k can only be specified once
  - Resolves: #1645335 FILE is shown in ksc man page but no explain or effect
  - Support for multiple -k arguments added
  - Man page reworded to match ksc behaviour


author: Čestmír Kalina <ckalina@redhat.com> - 1.5-1
changelog:
  - Resolves: #1647528 ksc add feature to copy justifications between ksc...
  - Resolves: #1648026 ksc add a non-processed .ko file
  - Resolves: #1647974 piped input causes ksc to fail when asking for user input
  - Add support for justification carry over.
  - Add support for symbol filtering using -K.
  - Fix input problems when piping through to ksc.
  - Extend manpage with EXAMPLES section.
  - Version bump fo 1.5.


author: Čestmír Kalina <ckalina@redhat.com> - 1.6-1
changelog:
  - Resolves: #1729039 Extend ksc output to include environment metadata
  - Add modinfo vermagic field to the output.
  - Add kmod (provides modinfo) to requires.


author: Čestmír Kalina <ckalina@redhat.com> - 1.6-2
changelog:
  - Resolves: #1729039 Extend ksc output to include environment metadata
  - (OSCI) Add kmod to Makefile-generated Requires


author: Čestmír Kalina <ckalina@redhat.com> - 1.7-1
changelog:
  - Resolves: #1886901 Avoid divisive language
  - Resolves: #1912506 File bugs with Tracking keyword by default


author: Čestmír Kalina <ckalina@redhat.com> - 1.9-1
changelog:
  - Resolves: #2043450 ksc: Support Authorization header in bugzilla API
  - Rebase to latest ksc release


author: Čestmír Kalina <ckalina@redhat.com> - 1.9-2
changelog:
  - Resolves: #2043450 ksc: Support Authorization header in bugzilla API
  - Use platform-python in place of python3


author: Jakub Hrozek <jhrozek@redhat.com> - 1.3.2-1
changelog:
  - New upstream release 1.3.3
  - Resolves: rhbz#1574267 - libldb-1.3.3 is available
  - Backport a patch from samba upstream to not require rpc.h


author: Petr Viktorin <pviktori@redhat.com> - 1.4.0-3
changelog:
  - Use %{__python2}, not "python", as the Python2 interpreter
  - Add workaround to allow building with Python 2
  - Remove the lmdb dependency in RHEL


author: Jakub Hrozek <jhrozek@redhat.com> - 1.5.4-1
changelog:
  - Resolves: rhbz#1684582 - Rebase libldb to version 1.5.4 for Samba
  - Resolves: rhbz#1567115 - libldb: Drop Python 2 subpackages from RHEL 8
  - Resolves: rhbz#1597243 - libldb uses Python 2 to build.


author: Jakub Hrozek <jhrozek@redhat.com> - 1.5.4-2
changelog:
  - Fix some python2-related upgrade issues
  - Related: rhbz#1567115 - libldb: Drop Python 2 subpackages from RHEL 8


author: Isaac Boukris <iboukris@redhat.com> - 2.0.7-3
changelog:
  - Resolves: rhbz#1754423 - Rebase libldb to 2.0.7 version for samba
  - Related: rhbz#1754423 - Fix sssd tests (ldb)


author: Isaac Boukris <iboukris@redhat.com> - 2.2.0-1
changelog:
  - Resolves: rhbz#1878114 - Rebase libldb to the version required by Samba
  - Resolves: rhbz#1794349 - Build libldb with lmdb support


author: Andreas Schneider <asn@redhat.com> - 2.3.0-1
changelog:
  - resolves: rhbz#1945021 - Update to version 2.3.0
  - resolves: rhbz#1897082 - Fix libldb tests on aarch64


author: Jan Macku <jamacku@redhat.com> - 0.97-1
changelog:
  - update to 0.97 (#2159588)
  - drop downstream patch - ipmi: avoid error messages on non-dell platforms


author: Jeff Moyer <jmoyer@redhat.com> - 0.3.110-12.el8
changelog:
  - Pass in the distro-provided CFLAGS and LFLAGS. (Jeff Moyer)
  - Get rid of -nostartfiles -nostdlib (Jeff Moyer)
  - Resolves: rhbz#1630578


author: Richard Hughes <richard@hughsie.com> 0.7.9-1
changelog:
  - New upstream release
  - Convert local icons found in metainfo files
  - Follow the Debian tilde usage when ordering versions
  - Use the launchable to find the desktop filename


author: Richard Hughes <richard@hughsie.com> 0.7.10-1
changelog:
  - New upstream release
  - Do not parse firmware files anymore
  - Do not require a release transaction when validating in relaxed mode
  - Extract release descriptions and agreement sections for translation


author: Richard Hughes <richard@hughsie.com> 0.7.11-1
changelog:
  - New upstream release
  - Add AS_APP_QUIRK_DEVELOPER_VERIFIED
  - Escape quotes in attributes
  - Provide async variants of store load functions


author: Richard Hughes <richard@hughsie.com> 0.7.13-1
changelog:
  - New upstream release
  - Do not restrict the maximum number of releases allowed
  - Throw an error when a launchable desktop-id is invalid


author: Richard Hughes <richard@hughsie.com> 0.7.14-1
changelog:
  - New upstream release
  - Add new API for gnome-software
  - Set the AppStream ID from the X-Flatpak desktop key


author: Richard Hughes <richard@hughsie.com> 0.7.8-1
changelog:
  - New upstream release
  - Add as_version_string() for fwupd
  - Add support for component agreements
  - Correctly compare version numbers like '1.2.3' and '1.2.3a'
  - Don't include the path component in the name when parsing the package filename
  - If the launchable is specified don't guess it when composing
  - Never add more than one component to the AppStream store when composing


author: Jeff Law <law@redhat.com> 8.2.1-3.4
changelog:
  - Backport PPC string inlines from trunk which allow for valgrind's
    memcheck to work properly (#1652929)
  - Backport bugfix for clz pattern on s390 affecting jemalloc (#1652016)


author: Marek Polacek <polacek@redhat.com> 8.3.1-3
changelog:
  - update from Fedora 8.3.1-3 (#1680182)
  - remove load and test FP splitter (#1673116)
  - fix *movsi_from_df (#1677652)
  - add missing headers
  - add support for live patching (#1668903)
  - retire gcc8-rh1612514.patch, gcc8-rh1652016.patch, gcc8-rh1652929-?.patch


author: Marek Polacek <polacek@redhat.com> 8.3.1-4
changelog:
  - update from Fedora 8.3.1-4 (#1680182)
  - drop gcc8-pr60790.patch, gcc8-pr89629.patch, gcc8-rh1668903-4.patch


author: Marek Polacek <polacek@redhat.com> 8.3.1-4.2
changelog:
  - backport the -fuse-ld=lld option (#1670535)
  - TLS model fix (#1678555, PR c++/85400)
  - two small autoFDO fixes (#1686082)
  - libgomp update (#1707568)
  - member template redeclaration fix (#1652704, PR c++/86747)
  - turn libgcc_s.so into a linker script on i?86, x86_64, ppc64le and also on
    ppc and ppc64 for 64-bit multilib (#1708309)
  - avoid using unaligned vsx or lxvd2x/stxvd2x for memcpy/memmove inline
    expansion (#1666977)


author: Marek Polacek <polacek@redhat.com> 8.3.1-4.5
changelog:
  - fix shift count operand printing (#1730380)
  - fix tree-outof-ssa.c ICE with vector types (PR middle-end/90139, #1730454)
  - fix out-of-ssa with unsupported vector types (PR rtl-optimization/90756,
    - fix ICE with template placeholder for TTP (PR c++/86098, #1730454)


author: Marek Polacek <polacek@redhat.com> 8.3.1-5
changelog:
  - update from Fedora gcc-8.3.1-5 (#1747157)
  - use unspec_volatile for darn (PR target/91481, #1760205, CVE-2019-15847)


author: Marek Polacek <polacek@redhat.com> 8.3.1-5.1
changelog:
  - consider negative edges in cycle detection (#1817991, PR gcov-profile/91601)
  - fix Fortran debug info for arrays with descriptors (#1655624,
    PR fortran/92775)
  - fix wrong code emitted for movv1qi on s390x (#1784758, PR target/92950)


author: Marek Polacek <polacek@redhat.com> 8.4.1-1
changelog:
  - update from GCC 8.4 release (#1868446)
  - remove symlinks to 32-bit versions of these static libraries: libasan.a,
    libitm.a, libquadmath.a, libubsan.a, libgfortran.a (#1779597)


author: Marek Polacek <polacek@redhat.com> 8.5.0-2
changelog:
  - revert upstream PR85873 gcc-8 fix, apply the fix from gcc-9 (#1960701)
  - fix 'this' adjustment for devirtualized call (PR c++/100797, #1965951)


author: Marek Polacek <polacek@redhat.com> 8.5.0-13
changelog:
  - require docbook-style-xsl instead of docbook5-style-xsl (#2073888)
  - backport Default widths with -fdec-format-defaults patch (#2074614)


author: Marek Polacek <polacek@redhat.com> 8.5.0-17
changelog:
  - fix deserialization for std::normal_distribution (#2130392,
    PR libstdc++/105502)
  - initialize std::normal_distribution::_M_saved (PR libstdc++/99536)
  - reject std::make_shared<T[]> (PR libstdc++/99006)


author: Marek Polacek <polacek@redhat.com> 8.5.0-20
changelog:
  - fix for TLSLD references (#2213753)
  - fix crash in dynamic_cast<>() on null pointer (PR c++/99074, #2211506)
  - adjust a pattern in s390.md (PR target/87723, #2214847)


author: Karel Zak <kzak@redhat.com> 2.32.1-10
changelog:
  - fix #1699310 - rpm -V setup fail on /var/log/lastlog
  - fix #1702712 - pam_env bypassed for root user when using su


author: Karel Zak <kzak@redhat.com> 2.32.1-13
changelog:
  - fix #1734553 - blkid_get_dev() leak file descriptor to underlying block device
  - fix #1719069 - findmnt warning "recommended root FS passno is 1" for XFS


author: Karel Zak <kzak@redhat.com> 2.32.1-18
changelog:
  - fix #1739443 - lscpu reports wrong hypervisor in nested virt on s390x
  - fix #1743555 - command chfn adds some useless commas with GECOS information into /etc/password


author: Karel Zak <kzak@redhat.com> 2.32.1-23
changelog:
  - fix #1826251 - remove MD metadata 0.90 based tests from util-linux CI
  - fix #1812576 - RFE: Bitlocker detection for RHEL 8.3
  - fix #1817726 - add libblkid BLOCK_SIZE
  - fix #1803753 - RHEL-8: col struct char_str c_column field should be of unsigned type and/or larger than 16 bit
  - fix #1812118 - mount -a always tries to mount smb3 share subdir despite being already mounted
  - fix #1824727 - util-linux: Include python3-libmount package in the release
  - fix #1829245 - mount -a tries to mount already mounted cifs shares when we cannot query up to root dir


author: Karel Zak <kzak@redhat.com> 2.32.1-25
changelog:
  - fix #1884194 - RHEL-8: chrt command does not support the -R option
  - fix #1855759 - mount.8: clarify (no)suid behavior on file capabilities
  - fix #1861670 - lsblk can not show serial information for virtio disk
  - fix #1883783 - lscpu: avoid segfault on PowerPC systems with valid hardware configurations
  - fix #1900498 - libfdisk/libmount: backport two patches for upstream systemd
  - fix #1883056 - lscpu support for Fujitsu A64FX
  - fix #1882740 - lscpu: use SMBIOS Type 4 strings for CPU vendor and model on ARM


author: Karel Zak <kzak@redhat.com> 2.32.1-28
changelog:
  - fix #1906157 - after su from root to a normal user mesg is unable to show current status
  - fix #1917852 - findmnt: add option to list all fs-independent flags
  - fix #1922299 - throws error using /sbin/nologin: invalid option -- 'c'
  - fix #1940607 - lsblk sometimes returns block devices in wrong order with --pairs
  - fix #1919529 - [RFE] RHEL-8: Support option flags with mount(8) --bind
  - fix #1946921 - RHEL8: mount --rbind -o rprivate doesn't do recursive bind mount


author: Karel Zak <kzak@redhat.com> 2.32.1-29
changelog:
  - fix #1988955 - script command continues without stopping.
  - fix #2041498 - incorrect partition size calculation for BLKPG_* ioctls
  - fix #2011602 - logger from util-linux incorrectly handles long messages
  - fix #1916151 - [RFE] spread fstrim.timer across time
  - fix #1894192 - Update or backport setpriv --pdeathsig
  - fix #2026511 - blkid fails to complete when targeting  non-block devices


author: Karel Zak <kzak@redhat.com> 2.32.1-31
changelog:
  - improve #2026511 fix - blkid fails to complete when targeting non-block devices
  - fix #1950187 - Ambient capabilities failed to applied to non-root user


author: Karel Zak <kzak@redhat.com> 2.32.1-36
changelog:
  - fix #2060030 - Please backport patches for atari partition detection to RHEL 8
  - fix #2069187 - Internal testsuite for lscpu failed on aarch64
  - fix #2093166 - lslogins reports incorrect "Password is locked" status
  - fix #2059241 - rpm -V / --verify reports bad user/group/mtime for /run/uuidd
  - fix #2044592 - Move /var/log/lastlog ownership to systemd


author: Karel Zak <kzak@redhat.com> 2.32.1-40
changelog:
  - fix #2121699 - fstrim -av fails to trim root filesystem on Red Hat Coreos 
  - fix #2142496 - update upstream tests
  - fix #2149394 - umount outputs inaccurate error message when umount() fails with EACCES
  - fix #2159544 - lslogins "Password is locked" status changed in util-linux-2.32.1-38
  - fix #2160321 - [last] ut->ut_user is not null terminated


author: Karel Zak <kzak@redhat.com> 2.32.1-43
changelog:
  - fix #2117355 - Add additional documentation for fstab
  - fix #2184728 - libuuid - downport cache related patch
  - fix #2188894 - The swapon man page of -p(priority) option shows incorrect.
  - fix #2227097 - wall(1) fail when trying to use seat0


author: Karel Zak <kzak@redhat.com> 2.32.1-46
changelog:
  - fix RHEL-13741 - lscpu: avoid EBUSY on cpuinfo_max_freq
  - fix RHEL-18451 - logger: initialize socket credentials control union
  - fix RHEL-16070 - util-linux: issues in libblkid
  - fix RHEL-6274 - lslogins incorrect account expiration field


author: Zoltan Fridrich <zfridric@redhat.com> - 2.26-5
changelog:
  - added CAP_PERFMON, CAP_BPF and CAP_CHECKPOINT_RESTORE capabilities
    resolves: rhbz#1946982 rhbz#1921576


author: Zoltan Fridrich <zfridric@redhat.com> - 2.48-2
changelog:
  - rebase to 2.48
    resolves: rhbz#2032813
  - fix ambient capabilities for non-root users
    resolves: rhbz#1950187


author: Anderson Toshiyuki Sasaki <ansasaki@redhat.com> - 2.48-5
changelog:
  - Fix integer overflow in _libcap_strdup() (CVE-2023-2603)
    Resolves: rhbz#2210636
  - Correctly check pthread_create() return value to avoid memory leak (CVE-2023-2602)
    Resolves: rhbz#2222197


author: Anderson Toshiyuki Sasaki <ansasaki@redhat.com> - 2.48-5
changelog:
  - Fix integer overflow in _libcap_strdup() (CVE-2023-2603)
    Resolves: rhbz#2210637
  - Correctly check pthread_create() return value to avoid memory leak (CVE-2023-2602)
    Resolves: rhbz#2210644


author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 0.7.8-6
changelog:
  - Python 2 binary package renamed to python2-libcap-ng
    See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3


author: Nikola Forró <nforro@redhat.com> - 0.41-17
changelog:
  - backport several upstream fixes
  - set Delegate property for cgconfig service to make sure complete
    cgroup hierarchy is always created by systemd


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.1.16-1
changelog:
  - Update to 0.1.16
  - Make inline function __comps_objmrtree_all also static (RhBug:1793424)
  - Fix memory leaks and resource leaks
  - Fix: Check result "comps_parse_parsed_init()"


author: Kalev Lember <klember@redhat.com> - 0.6.9-1
changelog:
  - Update to 0.6.9
  - Use make_install macro
  - Mark COPYING and COPYING.LIB as %license
  - Tighten -devel subpackage deps


author: Filip Januš <fjanus@redhat.com> 5.3.28-42
changelog:
  - Apply the previous change only on aarch64 to limit the risk of unwanted impact
  - Resolves: #1992402


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.33.0-1
changelog:
  - Update to 0.33.0
  - Enhance sorting for module list (RhBug:1590358)
  - [DnfRepo] Add methods for alternative repository metadata type and download (RhBug:1656314)
  - Remove installed profile on module enable or disable (RhBug:1653623)
  - Enhance modular solver to handle enabled and default module streams differently (RhBug:1648839)
  - Add support of wild cards for modules (RhBug:1644588)
  - Exclude module pkgs that have conflict
  - Enhance config parser to preserve order of data, and keep comments and format
  - Improve ARM detection
  - Add support for SHA-384
  - Return empty query if incorrect reldep (RhBug:1687135)
  - ConfigParser: Improve compatibility with Python ConfigParser and dnf-plugin-spacewalk (RhBug:1692044)
  - ConfigParser: Unify default set of string represenation of boolean values
  - Fix segfault when interrupting dnf process (RhBug:1610456)
  - Installroot now requires absolute path
  - Support "_none_" value for repo option "proxy" (RhBug:1680272)
  - Add support for Module advisories
  - Add support for xml:base attribute from primary.xml (RhBug:1691315)
  - Improve detection of Platform ID (RhBug:1688462)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.35.1-1
changelog:
  - Update to 0.35.1
  - Skip invalid key files in "/etc/pki/rpm-gpg" with warning (RhBug:1644040)
  - Enable timestamp preserving for downloaded data (RhBug:1688537)
  - Fix 'database is locked' error (RhBug:1631533)
  - Replace the 'Failed to synchronize cache' message (RhBug:1712055)
  - Fix 'no such table: main.trans_cmdline' error (RhBug:1596540)
  - Fix: skip_if_unavailable=true for local repositories (RhBug:1716313)
  - Add support of modular FailSafe (RhBug:1623128)
  - Add support of DNF main config file in context; used by PackageKit and
    microdnf (RhBug:1689331)
  - Exit gpg-agent after repokey import (RhBug:1650266)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.35.1-4
changelog:
  - Fix typo in error message (RhBug:1726661)
  - Update localizations from zanata (RhBug:1689991)
  - Don't disable nonexistent but required repositories (RhBug:1689331)
  - Ignore trailing blank lines of multiline value (RhBug:1722493)
  - Re-size includes map before re-computation (RhBug:1725213)


author: Ales Matej <amatej@redhat.com> - 0.35.5-1
changelog:
  - Update to 0.35.5
  - Make libdnf own its plugin directory (RhBug:1714265)
  - Set priority of dnf.conf.d drop-ins
  - Fix toString() to not insert [] (RhBug:1584442)
  - Fix handling large number of filenames on input (RhBug:1690915)
  - Detect armv7 with crypto extension only on arm version >= 8
  - A new standardized User-Agent field consisting of the libdnf and OS version
    (including the variant) (RhBug:1156007)
  - Add basic countme support (RhBug:1647454)
  - Fix crash in PackageKit (RhBug:1636803)
  - Do not create @System.solv files (RhBug:1707995)
  - Set LRO_CACHEDIR so zchunk works again (RhBug:1739867)
  - Improve detection of extras packages by comparing (name, arch) pair instead
    of full NEVRA (RhBuh:1684517)
  - Improve handling multilib packages in the history command (RhBug:1728637)
  - Repo download: use full error description into the exception text (RhBug:1741442)
  - Properly close hawkey.log (RhBug:1594016)
  - Fix dnf updateinfo --update to not list advisories for packages updatable
    only from non-enabled modules
  - Apply modular filtering by package name (RhBug:1702729)


author: Ales Matej <amatej@redhat.com> - 0.38.1-1
changelog:
  - Update to 0.38.1
  - Change the best option default to false
  - Use more descriptive message when failed to retrieve GPG key (RhBug:1605117)
  - Add removeMetadataTypeFromDownload function to the API
  - Context part of libdnf can now read vars (urlvars) from dirs and environment
  - Throw exception immediately if file cannot be opened
  - Add test when there is no primary metadata in compatible format (RhBug:1744960)
  - Various improvements to countme features
  - Don't abort on rpmdb checksum calculation failure
  - Enable module dependency trees when using set_modules_enabled_by_pkgset() (RhBug:1762314)
  - Resolve problem with --best and search in provides (RhBug:1737469)
  - New method "Query::filterSubject()", replaces Solution::getBestSolution()
  - The Solution class was removed
  - Add query argument into get_best_query and get_best_solution
  - Add module reset function into dnf_context
  - Add method to get all repository metadata locations
  - Catch NoModuleException in case of not existent value was used in persistor (RhBug:1761773)


author: Ales Matej <amatej@redhat.com> - 0.39.1-1
changelog:
  - Update to 0.39.1
  - Report reason how package was excluded (RhBug:1649754)
  - Additional Arm detection improvements (RhBug:1691430)
  - Set skip_if_unavailable for media repos to skip their update (RhBug:1716067)
  - Add support of xml:base for remote and local url in context (RhBug:1734350,1717865)


author: Ales Matej <amatej@redhat.com> - 0.39.1-3
changelog:
  - Add two new query filters: obsoletes_by_priority, upgrades_by_priority (RhBug:1769466)
  - [context] Add wildcard support in dnf_context_repo_set_data (RhBug:1781420)
  - Remove killGpgAgent function (RhBug:1781601)


author: Ales Matej <amatej@redhat.com> - 0.47.0-1
changelog:
  - Update to 0.47.0
  - Allow excluding packages with "excludepkgs" and globs
  - Make parsing of reldeps more strict (RhBug:1788107)
  - Add expanding solvable provides for dependency matching (RhBug:1534123)
  - DnfRepo: fix module_hotfixes keyfile priority level
  - Add custom exceptions to libdnf interface
  - Port to libmodulemd-2 API (RhBug:1693683)
  - Add prereq_ignoreinst & regular_requires properties for pkg (RhBug:1543449)
  - Reset active modules when no module enabled or default (RhBug:1767351)
  - Add comment option to transaction (RhBug:1773679)
  - Baseurl is not exclusive with mirrorlist/metalink (RhBug:1775184)
  - Add new function to reset all modules in C API (dnf_context_reset_all_modules)
  - Handle situation when an unprivileged user cannot create history database (RhBug:1634385)
  - Add query filter: latest by priority
  - Add setter for running kernel protection setting
  - Add DNF_NO_PROTECTED flag to allow empty list of protected packages
  - Config options: only first empty value clears existing (RhBug:1788154)
  - [conf] Set useful default colors when color is enabled
  - [context] Use installonly_limit from global config (RhBug:1256108)
  - [context] Add API to get/set "install_weak_deps"
  - [context] Adds support for includepkgs in repository configuration.
  - [context] Adds support for excludepkgs, exclude, includepkgs, and disable_excludes in main configuration.
  - [context] Added function dnf_transaction_set_dont_solve_goal
  - [context] Added functions dnf_context_get/set_config_file_path
  - [context] Respect "plugins" global conf value
  - [context] Add API to disable/enable plugins
  - [context] Create new repo instead of reusing old one (RhBug:1795004)
  - [context] Error when main config file can't be opened (RhBug:1794864)
  - [context] Add function function dnf_context_is_set_config_file_path
  - [context] Support repositories defined in main configuration file


author: Nicola Sella <nsella@redhat.com> - 0.48.0-1
changelog:
  - Update to 0.48.0
  - swdb: Catch only SQLite3 exceptions and simplify the messages
  - MergedTransaction list multiple comments (RhBug:1773679)
  - Modify CMake to pull *.po files from weblate
  - Optimize DependencyContainer creation from an existing queue
  - fix a memory leak in dnf_package_get_requires()
  - Fix memory leaks on g_build_filename()
  - Fix memory leak in dnf_context_setup()
  - Add `hy_goal_favor` and `hy_goal_disfavor`
  - Define a cleanup function for `DnfPackageSet`
  - dnf-repo: fix dnf_repo_get_public_keys double-free
  - Do not cache RPMDB
  - Use single-quotes around string literals used in SQL statements
  - SQLite3: Do not close the database if it wasn't opened (RhBug:1761976)
  - Don't create a new history DB connection for in-memory DB
  - transaction/Swdb: Use a single logger variable in constructor
  - utils: Add a safe version of pathExists()
  - swdb: Handle the case when pathExists() fails on e.g. permission
  - Repo: prepend "file://" if a local path is used as baseurl
  - Move urlEncode() to utils
  - utils: Add 'exclude' argument to urlEncode()
  - Encode package URL for downloading through librepo (RhBug:1817130)
  - Replace std::runtime_error with libdnf::RepoError
  - Fixes and error handling improvements of the File class
  - [context] Use ConfigRepo for gpgkey and baseurl (RhBug:1807864)
  - [context] support "priority" option in .repo config file (RhBug:1797265)


author: Nicola Sella <nsella@redhat.com> - 0.48.0-3
changelog:
  - Add log file level main config option (RhBug:1802074)
  - Accept '==' as an operator in reldeps (RhBug:1847946)


author: Nicola Sella <nsella@redhat.com> - 0.55.0-1
changelog:
  - Add vendor to dnf API (RhBug:1876561)
  - Add formatting function for solver error
  - Add error types in ModulePackageContainer
  - Implement module enable for context part
  - Improve string formatting for translation
  - Remove redundant printf and change logging info to notice (RhBug:1827424)
  - Add allow_vendor_change option (RhBug:1788371) (RhBug:1788371)


author: Nicola Sella <nsella@redhat.com> - 0.55.0-3
changelog:
  - Avoid multilib file conflict in config.h (RhBug:1918818)
  - [modules] Add special handling for src artifacts (RhBug:1809314)


author: Nicola Sella <nsella@redhat.com> - 0.55.0-4
changelog:
  - [context] improve retrieving repository configuration
  - Allow loading incomplete cache and loading ext solv files without its repodata


author: Lukas Hrazky <lhrazky@redhat.com> - 0.63.0-8
changelog:
  - Substitute all repository config options (fixes substitution of baseurl)
  - Use solvfile userdata to store and check checksums and solv versions
  - Fix handling transaction id in resolveTransactionItemReason
  - Set short action for Reason Change


author: Lukas Hrazky <lhrazky@redhat.com> - 0.63.0-10
changelog:
  - Do not print errors on failovermethod repo option
  - the dnf_context_remove() function accepts `<package-spec>`, doc updates
  - advisory upgrade: filter out advPkgs with different arch


author: Koichiro Iwao <koichiro.iwao@miraclelinux.com> 0.63.0-11.1.el8.ML.1
changelog:
  - Don't compile RHSM plugin on MIRACLE LINUX
  - Add git-core as a BuildRequires
  - Replace bugtraker with Asianux's Bugzilla


author: Jaroslav Rohel <jrohel@redhat.com> - 0.63.0-18
changelog:
  - filterAdvisory: match installed_solvables sort with lower_bound (RhBug:2212838, RHEL-1244)
  - Avoid reinstalling installonly packages marked for ERASE (RhBug:2163474, RHEL-1253)


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.63.0-1
changelog:
  - Update to 0.62.0
  - Hardening: add signature check with rpmcliVerifySignatures (RhBug:1932079)
  - Support allow_vendor_change setting in dnf context API
  - Add a new option module_obsoletes
  - Add new API applyObsoletes() function to apply modular obsoletes
  - Do not allow 1 as installonly_limit value (RhBug:1926261)
  - Add a config option to check TLS certificate revocation status (using OCSP stapling), defaults to false (RhBug:1814383)
  - Swdb: Add a method to get the current transaction
  - [context,API] Functions for accessing main/global configuration options
  - [context,API] Function for adding setopt
  - Add getter for modular obsoletes from ModuleMetadata
  - Add ModulePackage.getStaticContext() and getRequires()
  - Fix modular queries with the new solver
  - Fix: Fully set ssl in newHandle function
  - [conf] Add options for working with certificates used with proxy
  - Modify module NSVCA parsing - context definition (RhBug:1926771)
  - [context] Fix: dnf_package_is_installonly (RhBug:1928056)
  - Add getApplicablePackages to advisory and isApplicable to advisorymodule
  - Keep isAdvisoryApplicable to preserve API
  - [context] Support config file option "proxy_auth_method", defaults "any"
  - Support main config file options "installonlypkgs" and "protected_packages". Changes behaviour of microdnf and PackageKit.
  - Properly handle multiple collections in updateinfo.xml (RhBug:1804234)
  - Fix a crash when [media] section in .treeinfo is missing for bootable media (RhBug:1946024)
  - Add new dnf_context_module_install() C API


author: Pavla Kratochvilova <pkratoch@redhat.com> - 0.63.0-2
changelog:
  - Fix: dnf_context_module_install: memory leaks
  - covscan: remove unused vars, mark private func static, return values
  - DNF does not fail on non UTF-8 file names in a package


author: Maito Yokoyama <maito.yokoyama@asianux.com> - 0.63.0-8.1.el8.ML.1
changelog:
  - Don't compile RHSM plugin on MIRACLE LINUX
  - Add git-core as a BuildRequires
  - Add patch to change bugtracker


author: Jerry James <loganjerry@gmail.com> - 3.1-23.20170329cvs
changelog:
  - Add gcc BR
  - Build verbosely
  - Drop obsolete --enable-widec configure option
  - Fix "unused direct shared library dependency" warning from rpmlint again
  - Fix man page error due to BSD nroff macro that is not available on Linux
  - Drop explicit R on pkgconfig from the -devel package, autogenerated


author: Parag Nemade <pnemade AT fedoraproject DOT org> - 1:1.07.4-10
changelog:
  - Resolves:rh#1526510 - USE_TYPO_METRICS set in Fedora 2X but not set in RHEL7 or in ttf binary release
  - some spec cleanups


author: Vishal Vijayraghavan <vishalvijayraghavan AT gmail DOT com> - 1:2.00.3-1
changelog:
  - Resolves: rhbz#1614529
  - Updated the BuildRequires to python3 and using latest build
  - Changed the upstream URL


author: Vishal vijayraghavan <vishalvijayraghavan AT gmail DOT com> - 1:2.00.3-4
changelog:
  - Resolves: rhbz#1643920: Removed Obsoletes: liberation-narrow-fonts and Provides: liberation-narrow-fonts macro


author: Vishal Vijayraghavan <vvijayra@redhat.com> - 1:2.00.3-6
changelog:
  - Resolves: #1664501 - liberation-fonts-common contains fonts.dir
  - Splitted the font family(mono, sans and serif) into diferrent root font directories


author: Honggang Li <honli@redhat.com> - 1.11.1-1
changelog:
  - Rebase to upstream release v1.11.1
  - EFA Support requires libfabric
  - Resolves: bz1831145, bz1852636


author: Michal Schmidt <mschmidt@redhat.com> - 1.15.1-1
changelog:
  - Update to upstream release 1.15.1
  - Disable LTO on x86_64 due to memory issues (copied from Fedora)
  - Resolves: rhbz#2040450


author: Jens Petersen <petersen@redhat.com> - 3.1-12
changelog:
  - protect install-info in the rpm scriptlets
    https://fedoraproject.org/wiki/Packaging:Scriptlets#Texinfo


author: DJ Delorie <dj@redhat.com> - 3.1-24
changelog:
  - Use /etc/sysconfig/libffi-force-shared-memory-check-first to
    override selinux permissions check for shared memory access (#2014228)


author: Richard Hughes <richard@hughsie.com> - 1.0-1
changelog:
  - New upstream release
  - This fixes the security bug known as CVE-2018-5345
  - Add new API for fwupd
  - Do not encode timezone in generated files
  - Fix countless memory leaks when parsing corrupt files
  - Fix the calculation of the checksum on big endian machines
  - Switch to the Meson buildsystem


author: Tomáš Mráz <tmraz@redhat.com> 1.8.3-2
changelog:
  - make only_urandom a default in non-presence of configuration file
  - run the full FIPS selftests only when the library is called from
    application


author: Tomáš Mráz <tmraz@redhat.com> 1.8.3-3
changelog:
  - add CMAC selftest for FIPS POST
  - add continuous FIPS entropy test
  - disable non-approved FIPS hashes in the enforced FIPS mode


author: Tomáš Mráz <tmraz@redhat.com> 1.8.5-3
changelog:
  - new upstream version 1.8.5
  - AES performance improvements backported from master branch
  - FIPS module is implicit with kernel FIPS flag
  - always run the FIPS selftests if FIPS module is installed


author: Jakub Jelen <jjelen@redhat.com> - 1.8.5-6
changelog:
  - Fix for CVE-2021-33560 (#1971421)
  - Enable HW optimizations in FIPS (#1976137)
  - Performance enchancements for ChaCha20 and Poly1305 (#1855231)


author: Jakub Jelen <jjelen@redhat.com> - 1.8.5-6
changelog:
  - Fix for CVE-2021-40528 (#1971421)
  - Enable HW optimizations in FIPS (#1976137)
  - Performance enchancements for ChaCha20 and Poly1305 (#1855231)


author: Richard Hughes <richard@hughsie.com> 0.2.10-1
changelog:
  - New upstream version
  - Correctly detect removed devices when rescanning
  - Fix a memory leak when using control tranfers
  - Fix symbol version table up to version 0.2.9


author: Rafael Aquini <aquini@redhat.com> - 2.20-10
changelog:
  - Fix up annocheck distro flag failures (1624131)
  - Convert libhugetlbfs run_tests.py to Python3 (1620250)


author: Rafael Aquini <aquini@redhat.com> - 2.21-4
changelog:
  - Fix: task-size-overrun hung over 8 hours on ppc64le (1737370)
  - Introduce libhugetlbfs-tests subpkg for CI tests (1688930)


author: Rafael Aquini <aquini@redhat.com> - 2.21-12
changelog:
  - Fix: Introduce libhugetlbfs-tests subpkg for CI tests (1688930)
  - trim repetitive changelogs for interim debug builds


author: Rafael Aquini <aquini@redhat.com> - 2.21-13
changelog:
  - Fix: huge_page_setup_helper.py: SyntaxError: Missing parentheses in call to 'print' (1821938)
  - libhugetlbfs-tests: harden the testcases to satisfy EXECSHIELD RPMDiff checks (1785296)


author: Michal Židek <mzidek@redhat.com> - 2.2.0-11
changelog:
  - Resolves: rhbz#1733372 - permission denied on logs when running sssd as
                             non-root user


author: Michal Židek <mzidek@redhat.com> - 2.2.0-13
changelog:
  - Resolves: rhbz#1669407 - MAN: Document that PAM stack contains the
              systemd-user service in the account phase in RHEL-8


author: Michal Židek <mzidek@redhat.com> - 2.2.0-14
changelog:
  - Resolves: rhbz#1736796 - sssd config option "default_domain_suffix"
                             should not cause files domain entries to be
                             qualified, this can break sudo access


author: Michal Židek <mzidek@redhat.com> - 2.2.0-15
changelog:
  - Resolves: rhbz#1736265 - Smart Card auth of local user: endless
                             loop if wrong PIN was provided


author: Michal Židek <mzidek@redhat.com> - 2.2.0-16
changelog:
  - Resolves: rhbz#1736861 - dyndns_update = True is no longer enough to get
                             the IP address of the machine updated in IPA upon
                             sssd.service startup


author: Michal Židek <mzidek@redhat.com> - 2.2.0-17
changelog:
  - Resolves: rhbz#1676385 - pam_sss with smartcard auth does not create gnome
                             keyring
  - Also apply a patch to fix gating tests issue


author: Michal Židek <mzidek@redhat.com> - 2.2.0-18
changelog:
  - Resolves: rhbz#1744134 - New defect found in sssd-2.2.0-16.el8
  - Also sync. kcm multihost tests with master


author: Michal Židek <mzidek@redhat.com> - 2.2.0-19
changelog:
  - Resolves: rhbz#1712875 - Old kerberos credentials active instead of valid
                             new ones (kcm)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.0-19.1
changelog:
  - Resolves: rhbz#1816591 - p11_child should have an option to skip
                             C_WaitForSlotEvent if the PKCS#11 module does not
                             implement it properly [rhel-8.1.0.z]


author: Michal Židek <mzidek@redhat.com> - 2.2.0-10
changelog:
  - Resolves: rhbz#1736483 - Sudo prompt for smart card authentication is missing
                             the trailing colon


author: Michal Židek <mzidek@redhat.com> - 2.2.3-14
changelog:
  - Resolves: rhbz#1767514 - sssd requires timed sudoers ldap entries to be
                             specified up to the seconds


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-16
changelog:
  - Resolves: rhbz#1792331 - sssd_be crashes when krb5_realm and krb5_server is
                             omitted and auth_provider is krb5


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-17
changelog:
  - Resolves: rhbz#1718193 - p11_child should have an option to skip
                             C_WaitForSlotEvent if the PKCS#11 module
                             does not implement it properly


author: Michal Židek <mzidek@redhat.com> - 2.2.3-18
changelog:
  - Resolves: rhbz#1580506 - [RFE]: sssd to be able to read smartcard
                             certificate EKU and perform an action based
                             on value when generating SSH key from a certificate


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-19
changelog:
  - Resolves: rhbz#1810634 - id command taking 1+ minute for returning user
                             information


author: Alexey Tikhonov <atikhono@redhat.com> - 2.2.3-19
changelog:
  - Resolves: rhbz#1580506 - [RFE]: sssd to be able to read smartcard
                             certificate EKU and perform an action based
                             on value when generating SSH key from a certificate
                             (additional patch)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-1
changelog:
  - Resolves: rhbz#1839037 - Rebase SSSD for RHEL 8.3
  - Resolves: rhbz#1843872 - sssd 2.3.0 breaks AD auth due to GPO parsing failure
  - Resolves: rhbz#1834156 - sssd or sssd-ad not updating their dependencies on "yum update" which breaks working


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-2
changelog:
  - Resolves: rhbz#Bug 1723273 - RFE: Add option to specify alternate sssd config file location with "sssctl config-check" command.


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-3
changelog:
  - Resolves: rhbz#1829470 - `sssd.api.conf` and `sssd.api.d` should belong to `python-sssdconfig` package
  - Resolves: rhbz#1544457 - sssd fails to release file descriptor on child logs after receiving HUP
  - Resolves: rhbz#1824323 - SSSD user filtering is failing on RHEL 8 after "files" provider rebuilds cache
  - Resolves: rhbz#1827432 - When the passwd or group files are replaced, sssd stops monitoring the file for
                             inotify events, and no updates are triggered
  - Resolves: rhbz#1835710 - Change the message "Please enter smart card" to "Please insert smart card"
                             on GDM login with smart-card
  - Resolves: rhbz#1838037 - Oddjob-mkhomedir fails when using NSS compat
  - Resolves: rhbz#1845904 - gdm smart card authentication does not work shortly after disconnecting from network.
  - Resolves: rhbz#1845975 - sssd doesn't follow the link order of AD Group Policy Management
  - Resolves: rhbz#1845980 - sssd is failing to discover other subdomains in the forest
                             if LDAP entries do not contain AD forest root information
  - Resolves: rhbz#1845987 - Document how to prevent invalid selinux context for default home directories
                             in SSSD-AD direct integration.
  - Resolves: rhbz#1845994 - GDM failure loop when no user mapped for smart card
  - Resolves: rhbz#1846003 - GDM password prompt when cert mapped to multiple users and promptusername is False
  - Resolves: rhbz#1850961 - /usr/share/systemtap/tapset/sssd_functions.stp missing a comma


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-4
changelog:
  - Resolves: rhbz#1815584 - id_provider = proxy proxy_lib_name = files returns * in password field, breaking PAM authentication
  - Resolves: rhbz#1794607 - SSSD must be able to resolve membership involving root with files provider
  - Resolves: rhbz#1803134 - Improve "unlock" time when user session already active


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-5
changelog:
  - Resolves: rhbz#1821719 - sssd (sssd_be) is consuming 100% CPU, partially due to failing mem-cache
  - Fixed "requires/provides" rpmdiff warning


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-7
changelog:
  - Resolves: rhbz#1723273 - RFE: Add option to specify alternate sssd config file location with "sssctl config-check" command.
  - Resolves: rhbz#1780404 - smartcards: special characters must be escaped when building search filter


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-8
changelog:
  - Resolves: rhbz#1868387 - system not enforcing GPO rule restriction. ad_gpo_implicit_deny = True is not working
  - Resolves: rhbz#1854951 - sss-certmap man page change to add clarification for userPrincipalName attribute from AD schema
  - Resolves: rhbz#1856861 - False errors/warnings are logged in sssd.log file after enabling 2FA prompting settings in sssd.conf
  - Resolves: rhbz#1869683 - p11_child: default value of ocsp_dgst == sha256 doesn't conform RFC5019 and has to be changed to sha1


author: Alexey Tikhonov <atikhono@redhat.com> - 2.3.0-9
changelog:
  - Resolves: rhbz#1855323 - When ad_gpo_implicit_deny is True, it is permitting users to login when no gpo is applied


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-1
changelog:
  - Resolves: rhbz#1881992 - Rebase SSSD for RHEL 8.4
  - Resolves: rhbz#1722842 - sssd-kcm does not store TGT with ssh login using GSSAPI
  - Resolves: rhbz#1734040 - sssd crash in ad_get_account_domain_search()
  - Resolves: rhbz#1784459 - [RFE] tlog does not allow to exclude some users from session recording
  - Resolves: rhbz#1791300 - sporadic sssd_be crash on s390x
  - Resolves: rhbz#1817122 - 'getent group ldapgroupname' doesn't show any LDAP users or some LDAP users when 'rfc2307bis' schema is used with SSSD.
  - Resolves: rhbz#1819012 - [RFE] Improve AD site discovery process
  - Resolves: rhbz#1846778 - [RfE] `/usr/libexec/sssd/p11_child` cmdline argument '--nssdb' might be confusing when SSSD was built against OpenSSL
  - Resolves: rhbz#1873715 - automount sssd issue when 2 automount maps have the same key (one un uppercase, one in lowercase)
  - Resolves: rhbz#1879860 - correction in sssd.conf:pam_response_filter man page
  - Resolves: rhbz#1881336 - [RFE] sssd-ldap man page modification for parameter "ldap_referrals"
  - Resolves: rhbz#1883488 - [RfE] Implement a new sssd.conf option to disable the filter for AD domain local groups from trusted domains
  - Resolves: rhbz#1884196 - [RFE] Add "enabled" option to domain section in config file
  - Resolves: rhbz#1884205 - KCM: Increase client idle timeout to 5 minutes
  - Resolves: rhbz#1884207 - [RFE] ldap: add new option ldap_library_debug_level
  - Resolves: rhbz#1884213 - [RFE] add offline_timeout_max config option to control offline interval backoff
  - Resolves: rhbz#1884281 - Secondary LDAP group go missing from 'id' command
  - Resolves: rhbz#1884301 - [RFE] dyndns: suport asymmetric auth for nsupdate


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-3
changelog:
  - Resolves: rhbz#1900733 - sssd_be segfaults at be_refresh_get_values_ex() due to NULL ptrs in results of sysdb_search_with_ts_attr()
  - Resolves: rhbz#1876514 - High CPU utilization by the sssd_kcm process
  - Resolves: rhbz#1894540 - sssd component logging is now too generic in syslog/journal
  - Resolves: rhbz#1828483 - filtered ID is appearing due to strange negative cache behavior


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-4
changelog:
  - Resolves: rhbz#1876514 - High CPU utilization by the sssd_kcm process
  - Resolves: rhbz#1876658 - filter_groups option partially filters the group from 'id' output of the user because gidNumber still appears in 'id' output [RHEL 8]
  - Resolves: rhbz#1895001 - User lookups over the InfoPipe responder fail intermittently


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-5
changelog:
  - Resolves: rhbz#1631410 - Can't login with smartcard with multiple certs having same ID value
  - Resolves: rhbz#1884213 - [RFE] add offline_timeout_max config option to control offline interval backoff (additional patches)
  - Resolves: rhbz#1893159 - Default debug level should report all errors / failures
  - Resolves: rhbz#1893698 - [RFE] sudo kerberos authentication


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-6
changelog:
  - Resolves: rhbz#1113639 - autofs: return a connection failure until maps have been fetched
  - Resolves: rhbz#1915395 - Memory leak in the simple access provider
  - Resolves: rhbz#1915319 - SSSD: SBUS: failures during servers startup
  - Resolves: rhbz#1893698 - [RFE] sudo kerberos authentication (additional patches)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-7
changelog:
  - Resolves: rhbz#1920001 - Do not add '%' to group names already prefixed with '%' in IPA sudo rules
  - Resolves: rhbz#1918433 - sssd unable to lookup certmap rules
  - Resolves: rhbz#1917382 - [abrt] [faf] sssd: dp_client_handshake_timeout(): /usr/libexec/sssd/sssd_be killed by 11


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-8
changelog:
  - Resolves: rhbz#1926622 - Add support to verify authentication indicators in pam_sss_gss
  - Resolves: rhbz#1926454 - First smart refresh query contains modifyTimestamp even if the modifyTimestamp is 0.
  - Resolves: rhbz#1893159 - Default debug level should report all errors / failures (additional patch)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-9.1
changelog:
  - Resolves: rhbz#1949170 - pam_sss_gss.so doesn't work with large kerberos tickets [rhel-8.4.0.z]
  - Resolves: rhbz#1945656 - No gpo found and ad_gpo_implicit_deny set to True still permits user login [rhel-8.4.0.z]
  - Resolves: rhbz#1945655 - SSSD not detecting subdomain from AD forest (RHEL 8.3) [rhel-8.4.0.z]
  - Resolves: rhbz#1945654 - IPA missing secondary IPA Posix groups in latest sssd 1.16.5-10.el7_9.7 [rhel-8.4.0.z]
  - Resolves: rhbz#1942438 - Wrong default debug level of sssd tools [rhel-8.4.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.4.0-9.2
changelog:
  - Resolves: rhbz#1985456 - EMBARGOED CVE-2021-3621 sssd: shell command injection in sssctl [rhel-8.4.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.0-1
changelog:
  - Resolves: rhbz#1947671 - Rebase SSSD for RHEL 8.5
  - Resolves: rhbz#1930535 - [abrt] [faf] sssd: monitor_service_shutdown(): /usr/sbin/sssd killed by 11
  - Resolves: rhbz#1942387 - Wrong default debug level of sssd tools
  - Resolves: rhbz#1945888 - Inconsistant debug level for connection logging
  - Resolves: rhbz#1948657 - pam_sss_gss.so doesn't work with large kerberos tickets
  - Resolves: rhbz#1949149 - [RFE] Poor man's backtrace
  - Resolves: rhbz#1920500 - Authentication handshake (ldap_install_tls()) fails due to underlying openssl operation failing with EINTR
  - Resolves: rhbz#1923964 - [RFE] SSSD Error Msg Improvement: write_krb5info_file failed, authentication might fail.
  - Resolves: rhbz#1928648 - SSSD logs improvements: clarify which config option applies to each timeout in the logs
  - Resolves: rhbz#1632159 - sssd-kcm starts successfully for non existent socket_path
  - Resolves: rhbz#1627112 - RFE: Kerberos ticket renewal for sssd-kcm
  - Resolves: rhbz#1925505 - [RFE] improve the sssd refresh timers for SUDO queries
  - Resolves: rhbz#1925514 - [RFE] Randomize the SUDO timeouts upon reconnection
  - Resolves: rhbz#1925561 - sssd-ldap(5) does not report how to disable the SUDO smart queries
  - Resolves: rhbz#1925621 - document impact of indices and of scope on performance of LDAP queries
  - Resolves: rhbz#1855320 - [RFE] RHEL8 sssd: inheritance of the case_sensitive parameter for subdomains.
  - Resolves: rhbz#1925608 - [RFE] make 'random_offset' addon to 'offline_timeout' option configurable
  - Resolves: rhbz#1447945 - man page / docs update required: if two certificate matching rules with the same priority match only one is used
  - Resolves: rhbz#1703436 - sssd not thread-safe in innetgr()
  - Resolves: rhbz#1713143 - SSSD does not translate the 2FA text labels("first factor" / "second factor") on GDM login and screensaver unlock screen
  - Resolves: rhbz#1888977 - sss_override: Usage limitations clarification in man page
  - Resolves: rhbz#1890177 - Clarify "single_prompt" option in "PROMPTING CONFIGURATION SECTION" section of sssd.conf man page
  - Resolves: rhbz#1902280 - fix sss_cache to also reset cached timestamp
  - Resolves: rhbz#1935683 - SSSD not detecting subdomain from AD forest (RHEL 8.3)
  - Resolves: rhbz#1937919 - IPA missing secondary IPA Posix groups in latest sssd 1.16.5-10.el7_9.7
  - Resolves: rhbz#1944665 - No gpo found and ad_gpo_implicit_deny set to True still permits user login
  - Resolves: rhbz#1919942 - sss_override does not take precedence over override_homedir directive


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.1-1
changelog:
  - Resolves: rhbz#1947671 - Rebase SSSD for RHEL 8.5
  - Resolves: rhbz#1942387 - Wrong default debug level of sssd tools
  - Resolves: rhbz#1917444 - SSSD Error Msg Improvement: Server resolution failed: [2]: No such file or directory
  - Resolves: rhbz#1917511 - SSSD Error Msg Improvement: Failed to resolve server 'server.example.com': Error reading file
  - Resolves: rhbz#1917535 - sssd.conf man page: parameter dns_resolver_server_timeout and dns_resolver_op_timeout
  - Resolves: rhbz#1940509 - [RFE] Health and Support Analyzer: Link frontend to backend requests
  - Resolves: rhbz#1649464 - auto_private_groups not working as expected with posix ipa/ad trust
  - Resolves: rhbz#1925514 - [RFE] Randomize the SUDO timeouts upon reconnection
  - Resolves: rhbz#1961215 - Invalid sssd-kcm return code if requested operation is not found
  - Resolves: rhbz#1837090 - SSSD fails nss_getby_name for IPA user with SID if the user has user private group
  - Resolves: rhbz#1879869 - sudo commands incorrectly exports the KRB5CCNAME environment variable
  - Resolves: rhbz#1962550 - sss_pac_make_request fails on systems joined to Active Directory.
  - Resolves: rhbz#1737489 - [RFE] SSSD should honor default Kerberos settings (keytab name) in /etc/krb5.conf


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.1-2
changelog:
  - Resolves: rhbz#1974257 - 'debug_microseconds' config option is broken
  - Resolves: rhbz#1936902 - SSSD Error Msg Improvement: Invalid argument
  - Resolves: rhbz#1627112 - RFE: Kerberos ticket renewal for sssd-kcm (additional patches and rebuild)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-1
changelog:
  - Resolves: rhbz#1947671 - Rebase SSSD for RHEL 8.5
  - Resolves: rhbz#1693379 - sssd_be and sss_cache too heavy on CPU
  - Resolves: rhbz#1909373 - Missing search index for `originalADgidNumber`
  - Resolves: rhbz#1954630 - [RFE] Improve debug messages by adding a unique tag for each request the backend is handling
  - Resolves: rhbz#1936891 - SSSD Error Msg Improvement: Bad address
  - Resolves: rhbz#1364596 - sssd still showing ipa user after removed from last group
  - Resolves: rhbz#1979404 - Changes made to /etc/pam.d/sssd-shadowutils are overwritten back to default on sssd-common package upgrade


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2
changelog:
  - Resolves: rhbz#1975169 - EMBARGOED CVE-2021-3621 sssd: shell command injection in sssctl [rhel-8]
  - Resolves: rhbz#1962042 - [sssd] RHEL 8.5 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.1
changelog:
  - Resolves: rhbz#2014460 - tps tests fail with cross dependency on sssd debuginfo package: removal of 'sssd-libwbclient-debuginfo' is missing [rhel-8.5.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.2
changelog:
  - Resolves: rhbz#2018440 - 2.5.x based SSSD adds more AD domains than it should based on the configuration file (not trusted and from a different forest) [rhel-8.5.0.z]
  - Resolves: rhbz#2016923 - autofs lookups for unknown mounts are delayed for 50s [rhel-8.5.0.z]
  - Resolves: rhbz#2021499 - Make backtrace less "chatty" (avoid duplicate backtraces) [rhel-8.5.0.z]
  - Resolves: rhbz#2013379 - Lookup with fully-qualified name does not work with 'cache_first = True' [rhel-8.5.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.3
changelog:
  - Resolves: rhbz#2028828 - pam responder does not call initgroups to refresh the user entry [rhel-8.5.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.5.2-2.4
changelog:
  - Resolves: rhbz#2030651 - sssd-kcm has requirement on krb5 symbol "krb5_unmarshal_credentials" only available in latest RHEL8.5 krb5 libraries [rhel-8.5.0.z]
  - Resolves: rhbz#2035285 - AD Domain in the AD Forest Missing after sssd latest update [rhel-8.5.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.6.1-1
changelog:
  - Resolves: rhbz#2011216 - Rebase SSSD for RHEL 8.6
  - Resolves: rhbz#1968340 - 'exclude_groups' option provided in SSSD for session recording (tlog) doesn't work as expected
  - Resolves: rhbz#1952569 - SSSD should use "hidden" temporary file in its krb locator
  - Resolves: rhbz#1917970 - proxy provider: secondary group is showing in sssd cache after group is removed
  - Resolves: rhbz#1636002 - socket-activated services start as the sssd user and then are unable to read the confdb
  - Resolves: rhbz#2021196 - Make backtrace less "chatty" (avoid duplicate backtraces)
  - Resolves: rhbz#2018432 - 2.5.x based SSSD adds more AD domains than it should based on the configuration file (not trusted and from a different forest)
  - Resolves: rhbz#2015070 - Consistency in defaults between OpenSSH and SSSD
  - Resolves: rhbz#2013297 - disabled root ad domain causes subdomains to be marked offline
  - Resolves: rhbz#2013294 - Lookup with fully-qualified name does not work with 'cache_first = True'
  - Resolves: rhbz#2013218 - autofs lookups for unknown mounts are delayed for 50s
  - Resolves: rhbz#2013028 - [RFE] Health and Support Analyzer: Add sssctl sub-command to select and display a single request from the logs
  - Resolves: rhbz#2013024 - Add support for CKM_RSA_PKCS in smart card authentication.
  - Resolves: rhbz#2013006 - [RFE] support subid ranges managed by FreeIPA
  - Resolves: rhbz#2012308 - Add client certificate validation D-Bus API
  - Resolves: rhbz#2012122 - tps tests fail with cross dependency on sssd debuginfo package: removal of 'sssd-libwbclient-debuginfo' is missing


author: Alexey Tikhonov <atikhono@redhat.com> - 2.6.2-1
changelog:
  - Resolves: rhbz#2011216 - Rebase SSSD for RHEL 8.6
  - Resolves: rhbz#2013260 - [RHEL8] Add ability to parse child log files
  - Resolves: rhbz#2030386 - sssd-kcm has requirement on krb5 symbol "krb5_unmarshal_credentials" only available in latest RHEL8.5 krb5 libraries
  - Resolves: rhbz#1859315 - sssd does not use kerberos port that is set.
  - Resolves: rhbz#1961182 - Passwordless (GSSAPI) SSH not working due to missing "includedir /var/lib/sss/pubconf/krb5.include.d" directive in /etc/krb5.conf
  - Resolves: rhbz#2008829 - sssd_be segfault due to empty forest root name
  - Resolves: rhbz#2012263 - pam responder does not call initgroups to refresh the user entry
  - Resolves: rhbz#2012308 - Add client certificate validation D-Bus API
  - Resolves: rhbz#2012327 - Groups are missing while performing id lookup as SSSD switching to offline mode due to the wrong domain name in the ldap-pings(netlogon).
  - Resolves: rhbz#2013028 - [RFE] Health and Support Analyzer: Add sssctl sub-command to select and display a single request from the logs
  - Resolves: rhbz#2013259 - [RHEL8] Add tevent chain ID logic into responders
  - Resolves: rhbz#2017301 - [sssd] RHEL 8.6 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.6.2-3
changelog:
  - Resolves: rhbz#2039892 - 2.6.2 regression: Daemon crashes when resolving AD user names
  - Resolves: rhbz#1859315 - sssd does not use kerberos port that is set.
  - Resolves: rhbz#2030386 - sssd-kcm has requirement on krb5 symbol "krb5_unmarshal_credentials" only available in latest RHEL8.5 krb5 libraries
  - Resolves: rhbz#2035245 - AD Domain in the AD Forest Missing after sssd latest update
  - Resolves: rhbz#2017301 - [sssd] RHEL 8.6 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.6.2-4
changelog:
  - Resolves: rhbz#2074648 - sssd_nss exiting (due to missing 'sssd' local user) making SSSD service to restart in a loop [rhel-8.6.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.6.2-4.1
changelog:
  - Resolves: rhbz#2072958 - Use right sdap_domain in ad_domain_info_send [rhel-8.6.0.z]
  - Resolves: rhbz#2089244 - pam_sss_gss ceased to work after upgrade to 8.6 [rhel-8.6.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.0-2
changelog:
  - Resolves: rhbz#2069379 - Rebase SSSD for RHEL 8.7
  - Resolves: rhbz#2026799 - SSSD authenticating to LDAP with obfuscated password produces Invalid authtoken type message causing sssd_be to go offline (cross inter_ference of different provider plugins options)
  - Resolves: rhbz#2033347 - sssd error triggers backtrace : [write_krb5info_file_from_fo_server] (0x0020): [RID#73501] There is no server that can be written into kdc info file.
  - Resolves: rhbz#2056483 - [RFE] Add sssd internal krb5 plugin for authentication against external IdP via OAuth2
  - Resolves: rhbz#2062689 - [Improvement] Add user and group version of sss_nss_getorigbyname()
  - Resolves: rhbz#2065692 - [RHEL8] Ship new sub-package called sssd-idp into sssd
  - Resolves: rhbz#2072050 - sssd_nss exiting (due to missing 'sssd' local user) making SSSD service to restart in a loop
  - Resolves: rhbz#2072931 - Use right sdap_domain in ad_domain_info_send
  - Resolves: rhbz#2087088 - sssd does not enforce smartcard auth for kde screen locker
  - Resolves: rhbz#2087744 - Unable to lookup AD user if the AD group contains '@' symbol
  - Resolves: rhbz#2087745 - 2FA prompting setting ineffective
  - Resolves: rhbz#2087746 - sssd fails GPO-based access if AD have setup with Japanese language


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.2-1
changelog:
  - Resolves: rhbz#2069379 - Rebase SSSD for RHEL 8.7
  - Resolves: rhbz#2098620 - sdap_nested_group_deref_direct_process() triggers internal watchdog for large data sets
  - Resolves: rhbz#2098619 - [Improvement] add SSSD support for more than one CRL PEM file name with parameters certificate_verification and crl_file
  - Resolves: rhbz#2088817 - pam_sss_gss ceased to work after upgrade to 8.6
  - Resolves: rhbz#2098616 - Add idp authentication indicator in man page of sssd.conf
  - Resolves: rhbz#2056035 - 'getent hosts' not return hosts if they have more than one CN in LDAP
  - Resolves: rhbz#2098615 - Regression "Missing internal domain data." when setting ad_domain to incorrect
  - Resolves: rhbz#2098617 - Harden kerberos ticket validation
  - Resolves: rhbz#2087744 - Unable to lookup AD user if the AD group contains '@' symbol


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-1
changelog:
  - Resolves: rhbz#2069379 - Rebase SSSD for RHEL 8.7
  - Resolves: rhbz#2063016 - [sssd] RHEL 8.7 Tier 0 Localization


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-2
changelog:
  - Resolves: rhbz#2116488 - virsh command will hang after the host run several auto test cases
  - Resolves: rhbz#2116486 - [regression] sssctl analyze fails to parse PAM related sssd logs
  - Resolves: rhbz#2116487 - cache_req_data_set_hybrid_lookup: cache_req_data should never be NULL


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-3
changelog:
  - Resolves: rhbz#2116395 - NFS krb5 mount failed as "access denied" after test accessing a same file on krb5 nfs mount with multiple uids simultaneously since sssd-2.7.3-1.el8
  - Resolves: rhbz#2119726 - sssctl analyze --logdir option requires sssd to be configured
  - Resolves: rhbz#2120669 - Incorrect request ID tracking from responder to backend


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-4
changelog:
  - Resolves: rhbz#2116395 - NFS krb5 mount failed as "access denied" after test accessing a same file on krb5 nfs mount with multiple uids simultaneously since sssd-2.7.3-1.el8


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-4.1
changelog:
  - Resolves: rhbz#2128544 - Cannot SSH with AD user to ipa-client (`krb5_validate` and `pac_check` settings conflict) [rhel-8.7.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-4.2
changelog:
  - Resolves: rhbz#2139871 - Analyzer: Optimize and remove duplicate messages in verbose list [rhel-8.7.0.z]
  - Resolves: rhbz#2142961 - SSSD: `sssctl analyze` command shouldn't require 'root' privileged [rhel-8.7.0.z]
  - Resolves: rhbz#2148989 - UPN check cannot be disabled explicitly but requires krb5_validate = false' as a work-around [rhel-8.7.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-4.3
changelog:
  - Resolves: rhbz#2152883 - authenticating against external IdP services okta (native app) with OAuth client secret failed [rhel-8.7.0.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.7.3-5
changelog:
  - Related: rhbz#2132051 - Rebase Samba to the the latest 4.17.x release
    Rebuild against Samba rebase.


author: Alexey Tikhonov <atikhono@redhat.com> - 2.8.1-1
changelog:
  - Resolves: rhbz#2127511 - Rebase SSSD for RHEL 8.8
  - Resolves: rhbz#2144581 - [RFE] provide dbus method to find users by attr
  - Resolves: rhbz#2144579 - sssd timezone issues sudonotafter
  - Resolves: rhbz#2144519 - [RFE] SSSD does not support to change the user’s password when option ldap_pwd_policy equals to shadow in sssd.conf file
  - Resolves: rhbz#2127822 - Cannot SSH with AD user to ipa-client (`krb5_validate` and `pac_check` settings conflict)
  - Resolves: rhbz#2111393 - authenticating against external IdP services okta (native app) with OAuth client secret failed


author: Alexey Tikhonov <atikhono@redhat.com> - 2.8.2-1
changelog:
  - Resolves: rhbz#2127511 - Rebase SSSD for RHEL 8.8
  - Resolves: rhbz#2136701 - Lower the severity of the log message for SSSD so that it is not shown at the default debug level.
  - Resolves: rhbz#2139760 - [sssd] RHEL 8.8 Tier 0 Localization
  - Resolves: rhbz#2139865 - Analyzer: Optimize and remove duplicate messages in verbose list
  - Resolves: rhbz#2142795 - SSSD: `sssctl analyze` command shouldn't require 'root' privileged
  - Resolves: rhbz#2144491 - UPN check cannot be disabled explicitly but requires krb5_validate = false' as a work-around
  - Resolves: rhbz#2150357 - Smart Card auth does not work with p11_uri (with-smartcard-required)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.8.2-2
changelog:
  - Resolves: rhbz#2149091 - Update to sssd-2.7.3-4.el8_7.1.x86_64 resulted in "Request to sssd failed. Device or resource busy"


author: Eduard Abdullin <eabdullin@almalinux.org> - 2.8.2-3.alma
changelog:
  - Apply 0005-watchdog-add-arm_watchdog-and-disarm_watchdog-calls
   0006-sbus-arm-watchdog-for-sbus_connect_init_send
   0007-sysdb-fix-string-comparison-when-checking-for-overrides patches


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.0-1
changelog:
  - Resolves: rhbz#2167836 - Rebase SSSD for RHEL 8.9
  - Resolves: rhbz#2101489 - [sssd] Auth fails if client cannot speak to forest root domain (ldap_sasl_interactive_bind_s failed)
  - Resolves: rhbz#2143925 - kinit switches KCM away from the newly issued ticket
  - Resolves: rhbz#2151403 - AD user is not found on IPA client after upgrading to RHEL8.7
  - Resolves: rhbz#2164805 - man page entry should make clear that a nested group needs a name
  - Resolves: rhbz#2170484 - Unable to lookup AD user from child domain (or "make filtering of the domains more configurable")
  - Resolves: rhbz#2180981 - sss allows extraneous @ characters prefixed to username #


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.0-4
changelog:
  - Related: rhbz#2190417 - Rebase Samba to the latest 4.18.x release
    Rebuild against rebased Samba libs


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.1-1
changelog:
  - Resolves: rhbz#2167836 - Rebase SSSD for RHEL 8.9
  - Resolves: rhbz#2196521 - [RHEL8] sssd : AD user login problem when modify ldap_user_name= name and restricted by GPO Policy
  - Resolves: rhbz#2195919 - sssd-be tends to run out of system resources, hitting the maximum number of open files
  - Resolves: rhbz#2192708 - [RHEL8] [sssd] User lookup on IPA client fails with 's2n get_fqlist request failed'
  - Resolves: rhbz#2139467 - [RHEL8] sssd attempts LDAP password modify extended op after BIND failure
  - Resolves: rhbz#2054825 - sssd_be segfault at 0 ip 00007f16b5fcab7e sp 00007fffc1cc0988 error 4 in libc-2.28.so[7f16b5e72000+1bc000]
  - Resolves: rhbz#2189583 - [sssd] RHEL 8.9 Tier 0 Localization
  - Resolves: rhbz#2170720 - [RHEL8] When adding attributes in sssd.conf that we have already, the cross-forest query just stop working
  - Resolves: rhbz#2096183 - BE_REQ_USER_AND_GROUP LDAP search filter can inadvertently catch multiple overrides
  - Resolves: rhbz#2151450 - [RHEL8] SSSD missing group membership when evaluating GPO policy with 'auto_private_groups = true'


author: Eduard Abdullin <eabdullin@almalinux.org> - 2.9.1-4.alma.1
changelog:
  - sss_iface: do not add cli_id to chain key
  - mc: recover from invalid memory cache size
  - MC: a couple of additions to 'recover from invalid memory
   cache size' patch


author: Eduard Abdullin <eabdullin@almalinux.org> - 2.9.1-4.5.alma.1
changelog:
  - ad: gpo evalute host groups
  - DP: reduce log level in case a responder asks for unknown
   domain
  - ipa: Add `BUILD_PASSKEY` conditional for passkey codepath
  - LDAP: make groups_by_user_send/recv public
  - Makefile: Respect `BUILD_PASSKEY` conditional
  - pam: Conditionalize passkey code
  - sdap: add set_non_posix parameter
  - SSS_CLIENT: check if mem-cache fd was hijacked
  - SSS_CLIENT: check if reponder socket was hijacked
  - SSS_CLIENT: MC: in case mem-cache file validation fails
  - sysdb: remove sysdb_computer.[ch]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.2-1
changelog:
  - Resolves: RHEL-2630 - Rebase SSSD for RHEL 8.10
  - Resolves: rhbz#2226021 - dbus and crond getting terminated with SIGBUS in sss_client code
  - Resolves: rhbz#2237253 - SSSD runs multiples lookup search for each NFS request (SBUS req chaining stopped working in sssd-2.7)


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.3-1
changelog:
  - Resolves: RHEL-2630 - Rebase SSSD for RHEL 8.10
  - Resolves: RHEL-14070 - sssd-2.9.2-1.el8 breaks smart card authentication
  - Resolves: RHEL-3665 - Unexplainable error "Unable to find primary gid [2]: No such file or directory" when SSSD performs lookup for an AD user


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.4-1
changelog:
  - Resolves: RHEL-2630 - Rebase SSSD for RHEL 8.10
  - Resolves: RHEL-1680 - auto_private_groups does not create cache in IPA server SSSD cache
  - Resolves: RHEL-10092 - logfile rotation for sssd_kcm not working properly, sssd_kcm never receives a 'kill -HUP'
  - Resolves: RHEL-17495 - New sssd.conf seems not to be backwards compatible (wrt SmartCard auth of local users using 'files provider')
  - Resolves: RHEL-18431 - Excessive logging to sssd_nss and sssd_be in multi-domain AD forest
  - Resolves: RHEL-5033 - Incorrect IdM product name in man sssd.conf
  - Resolves: RHEL-15368 - SSSD GPO lacks group resolution on hosts [rhel-8]
  - Resolves: RHEL-10721 - very bad performance when requesting service tickets
  - Resolves: RHEL-19011 - Invalid handling groups from child domain
  - Resolves: RHEL-19949 - latest sssd breaks logging in via XDMCP for LDAP/Kerberos users [rhel-8]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.4-2
changelog:
  - Resolves: RHEL-25064 - AD users are unable to log in due to case sensitivity of user because the domain is found as an alias to the email address. [rhel-8]
  - Resolves: RHEL-25066 - gdm smartcard login fails with sssd-2.9.3 in case of multiple identities [rhel-8]
  - Resolves: RHEL-25065 - ssh pubkey stored in ldap/AD no longer works to authenticate via sssd [rhel-8]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.4-3
changelog:
  - Resolves: RHEL-27205 - Race condition during authorization leads to GPO policies functioning inconsistently


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.4-5.1
changelog:
  - Resolves: RHEL-67671 - Label DP_OPT_DYNDNS_REFRESH_OFFSET has no corresponding option [rhel-8.10.z]
  - Resolves: RHEL-68507 - sssd backend process segfaults when krb5.conf is invalid [rhel-8.10.z]
  - Resolves: RHEL-66267 - SSSD needs an option to indicate if the LDAP server can run the exop with an anonymous bind or not [rhel-8.10.z]
  - Resolves: RHEL-67128 - Excessive "Domain not found' messages logged to sssd_nss & sssd_be in multidomain AD forest [rhel-8.10.z]
  - Resolves: RHEL-66272 - sssd is skipping GPO evaluation with auto_private_groups [rhel-8.10.z]
  - Resolves: RHEL-66277 - possible regression of rhbz#2196521 [rhel-8.10.z]


author: Alexey Tikhonov <atikhono@redhat.com> - 2.9.4-5.2
changelog:
  - Resolves: RHEL-78300 - 'sssd_kcm' leaks memory [rhel-8.10.z]
  - Resolves: RHEL-82420 - Disk cache failure with large db sizes [rhel-8.10.z]
  - Resolves: RHEL-76022 - Use the DN from existing entry when updating a cached group [rhel-8.10.z]


author: Ondrej Mosnáček <omosnace@redhat.com> - 1.1.1-14_2
changelog:
  - [RHEL] Re-enable AEAD tests and ignore test result
  - [RHEL] Drop the ppc64 ignore-failures workaround


author: Ondrej Mosnáček <omosnace@redhat.com> - 1.1.1-16_1
changelog:
  - [RHEL] Apply 'Add missing dependencies to the tests package'
  - [RHEL] Apply 'Update patch from upstream'


author: Sahana Prasad <sahana@redhat.com> - 1.1.5-3
changelog:
  - Enables building on old kernels [sync fix in Fedora from omosnance].
  - This is required for covscans as they run on RHEL7 machines.


author: Zoltan Fridrich <zfridric@redhat.com> - 1.4.0-1
changelog:
  - Update to new upstream release 1.4.0
    Resolves: RHEL-5366
  - Add a patch to fix auxiliary tests in FIPS mode
    Resolves: RHEL-2406
  - Add a patch to zeroize kcapi-hasher for FIPS 140-3
    Resolves: RHEL-15290
  - Add a patch to allow overriding target file in kcapi-hasher
    Resolves: RHEL-15300


author: Zoltan Fridrich <zfridric@redhat.com> - 1.4.0-2
changelog:
  - Backport fixes for kcapi-hasher target option
    Related: RHEL-15300
  - Fix kcapi tests in FIPS mode
    Resolves: RHEL-2406


author: Phil Sutter <psutter@redhat.com> - 0.3-2
changelog:
  - Add missing build requirement: gcc.
  - Add source code patches to facilitate following changes.
  - Patches managed in git, so add git as another build requirement.
  - Respect build system compiler flags.
  - Use %make_build instead of plain make in %build.
  - Add %check target which performs unattended runtime test.
  - Use -D install flag instead of manual mkdir.


author: Phil Sutter <psutter@redhat.com> - 0.3-3
changelog:
  - Use %autosetup flag '-p1' instead of '-S git' to get rid of git dependency.
  - Use %license macro in %files section.
  - Added comment about included patches' upstream status.


author: Ana Cabral <acabral@redhat.com> - 1.26.0-2
changelog:
  - Add Conflicts tag because the bash-completion scripts moved
    from the main package to the utils sub package causing a file
    conflict on multilib systems between the old 32 bit main
    package and the new 64 bit utils sub package.


author: Martin Gansser <martinkg@fedoraproject.org> - 1:0.9.57-1
changelog:
  - Update to 0.9.57
  - Dropped dependency on libgcrypt
  - Dropped dependency on openssl
  - Update tarball link to "https:"
  - Add examples from doc/examples


author: Stephen Gallagher <sgallagh@redhat.com> - 2.5.0-2
changelog:
  - Fix memory corruption error using Module.search_rpms() from python
  - Speed up valgrind tests
  - Resolves: rhbz#1714766


author: Stephen Gallagher <sgallagh@redhat.com> - 2.0.0-0.beta2
changelog:
  - Update to 2.0.0beta2
  - Better validation of stored content during read and write operations
  - ModuleIndex now returns FALSE if any subdocument fails
  - Fix tests on 32-bit platforms
  - Make unknown keys in YAML maps non-fatal for libmodulemd1
  - Make unknown keys in YAML maps optionally fatal for libmodulemd 2.x
  - Fix RPM version requirements for libmodulemd1


author: Stephen Gallagher <sgallagh@redhat.com> - 2.0.0-1
changelog:
  - Update to 2.0.0 final
  - Assorted fixes for validation
  - Add modulemd-validator tool based on v2 code
  - Fix a crash when merging defaults
  - Add missing BuildRequires


author: Jiri Pirko <jiri@mellanox.com> - 1.6-1
changelog:
  - Update to 1.6
  - libndb: reject redirect and router advertisements from non-link-local
  - libndp: validate the IPv6 hop limit
  - libndp: revert API change for ndp_msg_send() and add ndp_msg_send_with_flags()
  - libndp: fix type of field "na" in "struct ndp_msgna"
  - ndptool: add option to send messages types
  - libndp: add option flags to send messages
  - Add SubmittingPatches howto


author: Hangbin Liu <haliu@redhat.com> - 1.7-1
changelog:
  - Update to 1.7
  - libndp: apply filter to raw socket to only accept ND messages
  - libndp: move ndp_sock_{open,close}() after msg parsing functions
  - ndptool: Fix compilation on musl libc


author: Hangbin Liu <haliu@redhat.com> - 1.7-2
changelog:
  - ndptool: add -T target support (rhbz 1666194)
  - ndptool: fix target parameter typo (rhbz 1666194)
  - libndp: close sockfd after using to avoid handle leak (rhbz 1666194)
  - libndp: fix nd_msg typo when setting target address (rhbz 1666194)


author: Hangbin Liu <haliu@redhat.com> - 1.7-3
changelog:
  - ndptool: add -D dest support (rhbz 1697595)
  - ndptool: fix potential memory leak caused by strdup (rhbz 1697595)


author: Steve Dickson <steved@redhat.com> 2.3.3-17
changelog:
  - Moved the gating tests out of a patch and into the top dir (bz 1653927)
  - Move the mode corrections on /etc/nfs.conf to nfsconvert.py (bz 1655880)
  - gssd: add verbosity options to the rpc.gssd man page (bz 1668026)


author: Steve Dickson <steved@redhat.com> 2.3.3-24
changelog:
  - nfs.man: Fixed small typo in man page (bz 1732877)
  - mount: Report correct error in the fall_back cases (bz 1709963)
  - rpc.mountd: Fix e_hostname and e_uuid leaks (bz 1712202)
  - spec: Remove redundant manpage files (bz 1718738)


author: Steve Dickson <steved@redhat.com> 2.3.3-27
changelog:
  - More coverity scans updates (bz 1746572)
  - nfsd: Adjust nfs.conf setting/parsing of rdma port (bz 1710532)
  - Add plain --rdma option to nfs.conf convertor (bz 1747295)
  - mountstats: Add per-op error counts to iostat command (bz 1719983)
  - gssd: add configure options verbosity to man page (bz 1749642)


author: Steve Dickson <steved@redhat.com> 2.3.3-32
changelog:
  - junction: Fixed debug statement (bz 1831829)
  - Userspace support for the latest nfsdcld daemon (bz 1817756)


author: Steve Dickson <steved@redhat.com> 2.3.3-33
changelog:
  - manpage: Add a description of the 'nconnect' mount option (bz 1761352)
  - nfsdclddb: Redname clddb-tool to nfsdclddb (bz 1836924)


author: Steve Dickson <steved@redhat.com> 2.3.3-38
changelog:
  - exports man page: warn about subdirectory exports (bz 1652437)
  - Don't modify /etc/group on upgrades (bz 1856881)
  - nfs-iostat: divide by zero with fresh mount (bz 1861823)
  - nfsiostat: Drop autofs entries before calling compare_iostats() (bz 1859130)
  - nfsdclddb: clddb-tool was recently renamed to nfsdclddb (bz 1893599)


author: Steve Dickson <steved@redhat.com> 2.3.3-39
changelog:
  - systemd: Ingnore export failures in nfs-server.serivce unit (bz 1894873)
  - exports.man: Remove some outdated verbiage (bz 1769688)


author: Steve Dickson <steved@redhat.com> 2.3.3-42
changelog:
  - gssd: Add options to allow for the use of ~/.k5identity file (bz 1868087)
  - man: Correct gssd(8) description of rpc-timeout and context-timeout (bz 1908232)
  - exportfs: fix unexporting of '/' (bz 1944119)


author: Steve Dickson <steved@redhat.com> 2.3.3-44
changelog:
  - gssd: Deal with failed thread creation (bz 1981400)
  - gssd: Add timeout for upcall threads (bz 1981403)
  - gssd: Cleaned up debug messages (bz 1961056)
  - spec: Updated description of the nfs-utils rpm (bz 1981419)


author: Steve Dickson <steved@redhat.com> 2.3.3-59
changelog:
  - Covscan Scan: Wrong Check of Return Value (bz 2151966)
  - Covscan Scan: Clang (experimental) (bz 2151971)


author: Scott Mayhew <smayhew@redhat.com> 2.3.3-61
changelog:
  - gssd: unconditionally use krb5_get_init_creds_opt_alloc (RHEL-62422)
  - gssd: do not use krb5_cc_initialize (RHEL-62422)


